Top High Efficiency Magnetic Coupling

Replacement Luraco Magnetic Jet Head BF-004 Fits Pedicure |spa Massage Chair| Tubs Spa Chairs Accessories.

  • 【Magnet Jet Head】Fit Shiatsulogic Pedicure Chair w/Discharge Pump Pedicure Tub | Pedicure Spa Chair Nail Salon Full Function Massage Chair,Pedicure chair parts with Pipe-less Whirlpool System Pedicure Spa..
  • 【 Easy Clean and Service】The magnetic head uses magnetic coupling technology, no shaft seal, will never leak, is worry free and Magnet-jet be easily clean..
  • 【Pedicure Spa Chair Magnetic Head】This Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor.Powerful and durable with 'No Splash' Design,Auto turn OFF to protect system when water level is low or magnet jet head is not attached..
  • 【Magnetic Head 】Size approx ：3 3/8"Diameter Back Head X 3 1/8"Diameter Front Head.Magnetic Head Set Include:1- base,1- magnetic impeller,1- cover..
  • NOTE: This Head will not fit to previous ECO jet system.When the magnetic induction pump is started, it will detect if there is enough water within 15 seconds. If there is not enough water detected within 15 seconds, it will automatically stop. If you want to start after stopping, you must cut off the power again, and then it can start..
  • 【After-Sales Guarantee】If you find that the product does not work, please check whether the pump is faulty. If you encounter any problems, please contact m....
Check Stock

Metalwork Compression Union Brass Tube Fitting, 2pcs (1/4\ OD x 5/16\ OD)

  • Union for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Three piece construction - nut, sleeve and body.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Vis Compression Union Straight, 3/8\ OD x3/8 inch OD COMP Brass Tube Fittings (Pack of 5)

  • Union Straight for connecting and disconnecting two tubes more easily than with a coupling.
  • Compression tube connections on both ends.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to +250 degrees F.
  • Three piece construction - nut, sleeve and body.
Check Stock

CENTAURUS 4Pcs Universal Motor Joint Shaft Coupling 4mm to 4mm with Screws

  • 【OPTIMAL PERFORMANCE】CENTAURUS premium upgrade Universal Motor Joint Shaft Coupling 4mm to 4mm is 100% brand new,wearproof, durable and widely used for motor etc..
  • 【HIGH QUALITY】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is made of high quality wearproof steel material which can use for a long time..
  • 【WIDE APPLICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm is widely used for shaft connection,produced based on International Flange Standard..
  • 【MAIN SPECIFICATION】CENTAURUS premium Universal Joint Shaft Coupling 4mm to 4mm ,Inner Diameter: 4mm to 4mm. Outer Diameter is 9mm. Height is 23mm. Color: Silver.
  • 【PACKAGE & SERVICE】Package Include: 4Pcsx 4mm to 4mm Universal Joint Shaft Coupling.Any question Pls fell free to contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

Universal Fit Pipeless Magnetic Jet Head Motor for LURACO Jet Motor Pedicure spa Chair Part Magnetic head BF-004 Pedicure spa Tubs

  • Apply to Pedicure spa chair part magnetic head uses magnetic coupling technology . There is no shaft seal, will never leak, is worry free.Pipeless massage pump..
  • Pipeless Magnetic Motor Jet Head can be fitted with all Luraco magnetic Motor..
  • Product Size ： 3 3/8"" Diameter Back Head X 3 1/8"" Diameter Front Head.
  • ◕‿◕ AFTER-SALE GUARANTEE: 100% money back guarantee - If for whatever reason, you decide you are not satisfied, you can request a replacement or a full refund, no questions! If you have any problems please kindly contact us by logging in your Amazon Buyer Account 003e Click Your Account 003e your order 003e Find your order and click Contact Seller we will respond you in one business day ..
Check Stock

Dixon BCM76 Brass Hose Fitting, Machined Coupling, 3/4\ GHT Male x 3/4\ Hose ID Barbed

  • Coupling for connecting two hoses or pipes with the same diameter in a straight run.
  • Connects to a hose on one end and a GHT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with rubber (styrene butadiene), neoprene, Viton, leather, or rubber gaskets (not included).
  • Hex nut for tightening threaded fitting with a wrench.
Check Stock

Legines 2pcs Barb Union 1/2 Barbed x 1/2 Barbed Splicer Brass Hose Fitting Mender Joiner

  • Union coupling for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Legines 2pcs Barb Union 3/8\ Barbed x 3/8\ Barbed Splicer Brass Hose Fitting Mender Joiner

  • Union coupling for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Dixon FAB200 Aluminum Hose Fitting King Short Shank Suction Coupling with Brass Nut 2 NPSM Female x 2 Hose ID Barbed

  • Coupling for connecting two hoses or pipes with the same diameter in a straight run.
  • Connects to a hose on one end and an NPSM male connector on the other.
  • Aluminum for lighter weight and resistance to corrosion and tarnishing.
  • Rubber gasket for high elasticity and resistance to abrasion and impact forces.
  • Brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

Dixon CAB150 Aluminum Hose Fitting Complete King Short Suction Coupling Set with Brass Nut 1-1/2 NPSM x 1-1/2 Hose ID Barbed

  • Coupling for connecting two hoses or pipes with the same diameter in a straight run.
  • Aluminum for lighter weight and resistance to corrosion and tarnishing.
  • Rubber gasket for high elasticity and resistance to abrasion and impact forces.
  • Brass nut for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock