Top High Efficiency Performance

HQST 400W Solar Panel Kit, 4 Pcs 100 Watt Monocrystalline Solar Panels + 40A MPPT Negative Grounded Controller + Mounting Z Brackets + Tray Cable + Adaptor Kit for RV Boat

  • 【High Efficiency】- 400W monocrystalline solar panel kit with a high conversion efficiency of up to 21%. Bypass diodes can ensure excellent performance in low-light environments. Perfect for off grid 12 volt battery charging system and a variety of DC applications..
  • 【STURDY】- Anti-reflective, high transparency, low iron tempered glass with enhanced stiffness and impact resistance, withstand high winds (2400Pa) and snow loads (5400Pa). IP65 rated junction box provides complete protection against environmental particles and low-pressure water jets. TPT back sheet ensures smooth performance over a long time..
  • 【LCD SCREEN DISPLAY & REMOTE MONITORING】- The 40A solar controller is equipped with an LCD screen and LED fault indicators, which can not only check device operating data and status but quickly determine system faults and modify controller parameters. Built-in Bluetooth module, you can download the APP ‘’ChargePro 2.0” app for remote monitoring that keeps 300 days of historical data..
  • 【HIGH HEAT DISSIPATION EFFICIENCY】- Die-cast aluminum heat sink makes the heat dissipation efficiency of the controller higher, which can minimize the power loss from heat. Using temperature sensors to compensate for battery charging voltage can exte....
Check Stock

TSI Supercool PAG Oil 46 Viscosity with Performance Enhancer 8 oz (1)

  • 46 Viscosity high performance synthetic PAG for R134a systems provides excellent resistance to moisture.
  • Anti-Wear Agents an Friction Modifiers enhance compressor & A/C system efficiency while reducing compressor wear rates which extends compressor life.
  • Anti-Oxidants protect system against formation of sludge and other deposits which can shorten compressor life and reduce system efficiency.
Check Stock

MGEHL 2525 2 External Grooving Holder with MGMN 200 Insert, Square Shank, Steel, Screw Clamp, Left Hand, 2 mm Grooving Width, 16 mm Maximum Depth of Cut, 25 mm Height, 25 mm Width, 150 mm Length.

  • Well Saelected and High Performance Materials,Has High Corrosion Resistance and Wear Resistance to Guaran Tee Stable Processing and Increased Working Efficiency Reduc Es Insert Wear To Affectively Increase The Lifetime of Products..
  • Strong Shockproof Performance,Has Good Shockproof Performance to Ensure Stable and Re-Fined Processing and High Working Efficiency as Well..
  • Quench Hardening and Easy Milling, Manufactured By Use of Advanced Quench Hardening Technol-ogy to Ensure Good Deformation Resistance.
  • Can be Used Forhard Milling and Effectively Improves Working Efficiency..
  • Well Designed Fastening Structure, Takes Use of Appropriate Fastening Structure to Ensure Highstiffness and That The Insert Groove and The Insert Fit Eachother Perfectly Provides High-Precision and High-Standard Processing Effect..
  • The matching blade is suitable for fine turning and semi-finishing turning.Very suitable for steel..
Check Stock

MGEHR 2020 1.5 External Grooving Holder with MGMN 150 Insert, Square Shank, Steel, Screw Clamp, Right Hand, 1.5 mm Grooving Width, 10 mm Maximum Depth of Cut, 20 mm Height, 20 mm Width, 125 mm Length.

  • Well Saelected and High Performance Materials,Has High Corrosion Resistance and Wear Resistance to Guaran Tee Stable Processing and Increased Working Efficiency Reduc Es Insert Wear To Affectively Increase The Lifetime of Products..
  • Strong Shockproof Performance,Has Good Shockproof Performance to Ensure Stable and Re-Fined Processing and High Working Efficiency as Well..
  • Quench Hardening and Easy Milling, Manufactured By Use of Advanced Quench Hardening Technol-ogy to Ensure Good Deformation Resistance.
  • Can be Used Forhard Milling and Effectively Improves Working Efficiency..
  • Well Designed Fastening Structure, Takes Use of Appropriate Fastening Structure to Ensure Highstiffness and That The Insert Groove and The Insert Fit Eachother Perfectly Provides High-Precision and High-Standard Processing Effect..
  • The matching blade is suitable for fine turning and semi-finishing turning.Very suitable for steel..
Check Stock

OSCARBIDE Nickel Plated External Lathe Turning Tool Holder with SNMG120404(SNMG431) Carbide Insert,TSDNN T-Type Clamp TSDNN 2020K 12,Double Clamp Style Tool Holder Metal Cutting Tools, 1piece

  • Well Saelected and High Performance Materials,Has High Corrosion Resistance and Wear Resistance to Guaran Tee Stable Processing and Increased Working Efficiency Reduc Es Insert Wear To Affectively Increase The Lifetime of Products..
  • Strong Shockproof Performance,Has Good Shockproof Performance to Ensure Stable and Re-Fined Processing and High Working Efficiency as Well..
  • Quench Hardening and Easy Milling, Manufactured By Use of Advanced Quench Hardening Technol-ogy to Ensure Good Deformation Resistance.
  • Can be Used Forhard Milling and Effectively Improves Working Efficiency..
  • Well Designed Fastening Structure, Takes Use of Appropriate Fastening Structure to Ensure Highstiffness and That The Insert Groove and The Insert Fit Eachother Perfectly Provides High-Precision and High-Standard Processing Effect..
  • The matching blade is suitable for fine turning and semi-finishing turning. It can be used for processing stainless steel, pig iron, ordinary steel, etc., with strong versatility..
Check Stock

Turning Insert Holder SSSCR 1616H 09, with 1PCS Insert SCMT 31.51 (SCMT 09T 304), Square Shank, Steel, External, Screw Clamp, Right Hand, 16mm Width x 16mm Height Shank, 100mm Length.

  • Well Saelected and High Performance Materials,Has High Corrosion Resistance and Wear Resistance to Guaran Tee Stable Processing and Increased Working Efficiency Reduc Es Insert Wear To Affectively Increase The Lifetime of Products..
  • Strong Shockproof Performance,Has Good Shockproof Performance to Ensure Stable and Re-Fined Processing and High Working Efficiency as Well..
  • Quench Hardening and Easy Milling, Manufactured By Use of Advanced Quench Hardening Technol-ogy to Ensure Good Deformation Resistance.
  • Can be Used Forhard Milling and Effectively Improves Working Efficiency..
  • Well Designed Fastening Structure, Takes Use of Appropriate Fastening Structure to Ensure Highstiffness and That The Insert Groove and The Insert Fit Eachother Perfectly Provides High-Precision and High-Standard Processing Effect..
  • The matching blade is suitable for fine turning and semi-finishing turning. It can be used for processing stainless steel, pig iron, ordinary steel, etc., with strong versatility..
Check Stock

Renogy Solar Panel 100 Watt 12 Volt Eclipse Monocrystalline High-Efficiency Module PV Power for Battery Charging, Boat, Caravan, RV and Other Off-Grid Applications, 100MB, 100W

  • [More Efficient] These Monocrystalline solar panels come with high-efficiency cells that help increase module efficiency. Module efficiency: Eclipse 100W Monocrystalline:22%, regular 100W Monocrystalline: 21% , 100W Polycrystalline: 18.7%. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments..
  • [Improved Look] No grid lines on the front of solar cells allow for a more clean look. The new black frame compliments high-efficiency solar cells..
  • [Reliable] Advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide a long service life. EL tested solar modules.
  • no hot-spot heating guaranteed. TPT back sheet ensures smooth performance over a long period of time..
  • [Durable] Guaranteed positive output tolerance (0-3%).
  • withstands high winds (2400Pa) and snow loads (5400Pa). Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Anti-reflective, high transparency, low iron tempered glass with enhanced stiffness and impact resistance. IP65 rated junction box provides complete protection against environmental particles and low-pressure water jets..
  • [Versatile] Can be used for many different applications. Ground mount ....
Check Stock

HQST 190W 12V Monocrystalline Solar Panel w Solar Connectors High Efficiency Module PV Power for Battery Charging Boat, Caravan, RV and Any Other Off Grid Applications

  • 【High Efficiency】High module conversion efficiency. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. Monocrystalline panels come with high-efficiency solar cells that help increase space efficiency..
  • 【Easy Installation】For Good Partner tilt mount, please search B08Z3G2XPR. Pre-drilled holes on the back of the panel allow for fast mounting and securing. Compatible with different mounting systems such as Z-brackets, Pole Mounts, and Tilt Mounts..
  • 【Reliability】 EL tested solar modules.
  • no hot-spot heating guaranteed. Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. withstand high winds (2400Pa) and snow loads (5400Pa)..
  • 【Anti-reflective】 High transparency, low iron-tempered glass with enhanced stiffness and impact resistance, withstand high winds (2400Pa) and snow loads (5400Pa). IP65 rated junction box provides complete protection against environmental particles and low pressure water jets. TPT back sheet ensures smooth performance over a long period of time..
  • 【Long Life】 Waterproof IP65 rated junction box, advanced encapsulation material with multi-layered sheet laminations to enhance a long service life..
Check Stock

Allegro MUA63 DaVinci 10,000 Square Feet Central Vacuum Power Unit

  • Manufacturer’s Suggested Retail Price (MSRP): $US 599.99. Eco-Line Green Powered All Steel 6.6 inch Ametek Lamb Blower True Tangential Discharge Motor.
  • Performance: Cleaning Power 660 air watts, Suction Power 140.8 inch water lift, Air-Flow 131.1 CFM, Power 14 Amp, Operating Voltage ~120v, 8 Gallon Collection Capacity.
  • Permanent Self-Cleaning Maintenance-Free high Permeability Micro Fibre Filter – Permanent Self-Cleaning Filter: Allegro Power Units are equipped with Micro Fiber Filtration System that traps particles of 3 micrometer in size with 99.98% efficiency. The filter is not need to be removed, washed or cleaned. This patented high permeation Micro Fiber filter will maintain suction power over time. Filtration technology that is ideal for homes with pets..
  • Ultimate Performance – High Efficiency High Performance Motor.
  • *** GUARANTEED FOR LIFE *** against corrosion perforation. The entire unit is baked epoxy Powder Coat finish inside and out. 10 Year Manufacturer’s Motor Warranty. Free Technical Support 929.800.2980.
Check Stock

Yakamoz 10 Pack 1/8" Shank Spiral CNC End Mill Router Bits Upcut Milling Cutters for MDF Acrylic Wood PVC, 4 Flutes, 15mm Cutting Length, Flat End

  • Type: Spiral (Upcut), Cutting Type: 4 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 0.59" (15mm), Overall Length: 1-33/64" (38.5mm).
  • High quality carbide end mill provides good milling & cutting performance to ensure high work efficiency and to maximize worker efficiency..
  • These bits own sharp edge which is able for fast engraving that makes high efficiency, high precision,smokeless and burr-free while processing..
  • For CNC,engraving machine woodworking, carving milling soft and hard wood, plywood, plastics, MDF, PVC, aluminum, composite board, etc..
  • Made of tungsten steel material with industrial quality control to ensure best performance and long life use..
Check Stock

K&N Air Filter Oil: 12.25 Oz Aerosol; Restore Engine Air Filter Performance and Efficiency, 99-0516

  • DESIGNED SPECIFICALLY FOR K&N AIR FILTERS.
  • FORMULATED TO IMPROVE AIR FILTER PERFORMANCE.
  • QUICKLY PENETRATES AND SATURATES FILTER PLEATS: K&N Air Filter Oil traps contaminants that reduce air flow efficiency and disrupt engine performance.
  • FILTER OIL: K&N red filter oil remains suspended in the pleats of the cotton filter material of High-Flow Air Filters, allowing for exceptional contaminant capture.
  • RENEWED EFFICIENCY: Restores air flow efficiency so your K&N air filter performs like new.
Check Stock

Drill Press Machines Parts Feed Hub Wheel & 195mm Handle Bar Set

  • Type: Straight, Cutting Type: 2 Flutes, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 2/3" (17mm), Overall Length: 1-33/64" (38.5mm).
  • Double flute design cnc router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Industrial quality control to ensure best performance with high precision,work perfect on milling or cutting machines, ensure high work efficiency..
  • Made of tungsten steel material with good milling, cutting performance, ensure high work efficiency, durable and high precision..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
Check Stock