Top High Feed Milling Cutter

Face Mill Cutter Holder EMRW 6R 63-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine.

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel

  • Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
  • Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
  • Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
  • Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
  • Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

2.5 Inch Face Milling Cutter Holder EMR 5R 63MM CNC end Milling Cutter + R8-FMB22 Shank Face Shell Mill Arbor + 4pcs RPMW1003 Carbide Inserts + 8mm Hexagon Wrench + T15 Wrench CNC Machine Tools

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner Used for Fough Machining of The Workpiece on The Milling Machine EMRW 6R50-22 1.96 Inch

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Utoolmart Carbide Flat Nose End Mill Cutter, CNC Router Cutter, 3mm Cutting Dia, 4 Flute End Mill Cutter CNC Router Bits, Spiral Drill Bit Straight End Mill Cutter, 1 Pcs

  • 【Dimension】- Shank Diameter: 3mm / 0.12-inch.
  • 【Material】- The milling cutter is made of cemented carbide, sharp and durable, with high bending resistance and abrasion resistance..
  • 【Application】- Ideal for 2D relief sculpturing, cutting, engraving, slotting, milling, etc. Apply to Nylon, Resin, ABS, Acrylic, PVC, MDF, Hardwood..
  • 【Advantage】- Carbide can run at higher speed than high-speed steel, resisting abrasion and high cutting temperature..
  • 【Note】- Please adjust the speed, feed and cutting depth according to actual cutting conditions..
Check Stock

KXA High Hardness Metal 22Mm Milling Arbor Gear Milling Cutter Tool Holder Taper Ms3

  • Is a lathe, milling machine, drilling machine common accessories..
  • Can be installed horizontal cutter bar, saw blade cutter, saw milling cutter, piece cutter..
  • High precision, high hardness, durability, is not deformed..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

1 Piece of 22mm R8 Shank Milling Cutter Shank, Horizontal Milling Cutter Arbor 22MM R8 Shank Milling Machine Spindle Suitable for Milling Machine Bridge Mouths Gear Milling Cutter Holder

  • Suitable for cutting machine/saw diameter: 22mm..
  • High hardness, determine the maximum use..
  • R8 shank short milling cutter holder, used for 22mm gear milling cutter/face milling cutter/longitudinal saw..
  • Features: Made of alloy spring steel and alloy forged steel, with long service life..
Check Stock

8Pcs Gear Cutter High Speed Steel Milling Cutter 20° Pressure Angle Cutting Tool Industrial Supplies M1.5 5mmx6mm

  • Good Tool :This gear milling cutter is a special cutting tool specially designed for milling gears..
  • Package Quantity :There are a total of 8 sets of gear cutting tools to suit different numbers of teeth..
  • Features :The size and proportion are uniform to provide a good cutting range and sufficient rigidity..
  • High quality :This gear milling cutter is made of high-speed steel, strong and durable.
  • Good performance :The gear cutter has great workmanship, perfect replacement for the old or damaged one..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Milling Cutter Bearings Replacement Kit, Bearing Replacement Set 1 1/8 Outer Dia Compact Top Mounted for Shank for Head

  • Good Quality Steel Material: Made of good quality steel material, fast and easy to use, possess high strength, good toughness, uniform material bring high working reliability.
  • Compact Shape: This router bit bearing come with compact shape, easy to carry, convenient for you to store and use.
  • 28.6mm Bearing Diameter: The bearing diameter is 28.6mm, equipped with screw and hex wrench for easy installation and disassembly.
  • For Milling Cutter Heads And Tool Holders: Durable steel bearing accessories are suitable for milling cutter heads and tool holders, very practical.
  • Replace Or Repair Damaged Or Missing Bearings: Milling cutter bearing replacement kit can be used to replace or repair damaged or missing router bit bearings.
Check Stock