Top High Flow Rate Nozzle For Faster Printing

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock

KUWAN 30pcs Brass Misting Nozzles for Cooling System 0.023\ (0.6 mm) 10/24 UNC Garden (0.023)

  • Brass / SS 0.023 inches (0.6 mm) orifice, screw Into any 10/24-threaded mist nozzle opening.
  • High Quality: made of brass, never rust. the bras nozzle is the best choice for outdoor use with cold water.
  • Operation Pressure: 20-70kg/cm, flow Rate: 80-145ml/min.
  • Minimal water use of 1/2 gallon of water per hour per mist nozzle.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best pr....
Check Stock

Robox 3D Printer Dual Extruder High Definition

  • Headlock System: Allows quick change of print head.
  • Quick Fill Dual Nozzle Technology: Detailed perimeter nozzle (0.3mm).
  • Smart Reel System: Automatic material recognition.
  • wide range of materials and colors available.
  • Smart Extruder System: Supports single or dual extruders.
  • Fully automatic material loading/unloading.
  • Automaker Software: East to use interface.
Check Stock

Garden Hose Nozzles 8 Adjustable Patterns Hose Spray Nozzle Heavy Duty Metal Hose Nozzle Spray Gun Slip Resistant Water Sprayer for Cleaning/Watering/Car Wash/Showering Pets

  • PROFESSIONAL METAL HOSE NOZZLE: Highly durable construction - Rust-proof, Leak-proof, Corrosion-Resistant. This hose nozzle is made of heavy duty metal and Plastic, which assures durable and longer life. The hose spray nozzle handle with ergonomic design make your work more comfortable and convenient..
  • 8 WATERING SPRAY PATTERNS: Garden Hose nozzle has 8 adjustable hose sprayer patterns (Cone/Full/Jet/Center/Shower/Mist/Flat/Vertical) can use high pressure hose nozzle. There has the Flow control knob can adjust the water flow. This hose nozzle is a multifunctional water hose nozzle which can meet your various needs..
  • STURDY, DURABLE & COMFORTABLE: Sturdy design and a rubber hose washer provides a durable and tight seal to eliminate leak. The heavy-duty durable construction ensures long use. The ergonomic handle of nozzle with rubberized outer coating is comfortable, slip-resistant and easy to grip. Labor-saving buckle, convenient to use..
  • WATERING QUICKLY AND EVENLY: No trouble watering the garden! You only need to hold hose nozzle and stand on the spot like a soldier, whether it is the flowers on the fence, the trees by the corner, and the entire lawn can be watered by the hose. This hose sprayer can better make the water flow into the soil more evenly,....
Check Stock

Dr. Brown's Natural Flow Baby Bottle Nipple - Level 4, Fast Flow - 6pk - 9m+

  • Fast flow nipple works with internal vent system for paced feeding.
  • Each Level 4 Nipple has same consistent flow rate, so both you and baby know what to expect.
  • Made of super-soft, high-grade silicone and fits all Dr. Brown’s Narrow bottles.
  • The suggested age range for the Level 4 Nipple is 9 months+, but baby’s preferred flow rate may vary.
  • Dishwasher (top rack) and sterilizer safe , BPA free.
  • Level up to a faster nipple flow! Dr. Brown’s Level 4 Narrow Nipple is our fastest flow nipple for babies 9m+..
Check Stock

NO.17 Submersible Aquarium Internal Filter 12W, Adjustable Fish Tank Filter with 320 GPH Water Pump for 50-150 Gallon Fish Tank

  • [12W AQUARIUM FILTER]: This Fish Tank Internal Filter is a system that create a clean and fresh living environment for your lovely fish. 12 watt is perfect for 50-150 gallon large aquariums..
  • [ADJUSTABLE 320 GPH WATER PUMP]: Max Flow Rate: 320 GPH(1200L/H), Max Lift height: up to 3.9 Feet.(Length of power cord:1.6M=5.25ft). This water pump is designed for reliability and ultra-quiet operation, and you have a key to adjust the flow rate..
  • [4NOZZLE, 2 MODEL]: In this package, there have 4 nozzle, you could choose 4 nozzle to clean and fresh your aquarium..
  • [MULTIPLE FILTER MEDIA]: The filter with multiple filter media for all filtration purposes. Your lovely fish or turtle will have a clean and fresh environment for living..
  • [WARRANTY]: All products purchased from our company are guaranteed to keep in good repair for 180 days.If quality problems happen in guaranteed period, our company will maintain for free..
Check Stock

NO.17 Submersible Aquarium Internal Filter 15W, Adjustable Fish Tank Filter with 400 GPH Water Pump for 150-300 Gallon Fish Tank

  • [15W AQUARIUM FILTER]: This Fish Tank Internal Filter is a system that create a clean and fresh living environment for your lovely fish. 15 watt is perfect for 150-200 gallon large aquariums..
  • [ADJUSTABLE 400 GPH WATER PUMP]: Max Flow Rate: 400 GPH(1500L/H), Max Lift height: up to 5.25 Feet.(Length of power cord:1.6M=5.25ft). This water pump is designed for reliability and ultra-quiet operation, and you have a key to adjust the flow rate..
  • [4NOZZLE, 2 MODEL]: In this package, there have 4 nozzle, you could choose 4 nozzle to clean and fresh your aquarium..
  • [MULTIPLE FILTER MEDIA]: The filter with multiple filter media for all filtration purposes. Your lovely fish or turtle will have a clean and fresh environment for living..
  • [WARRANTY]: All products purchased from our company are guaranteed to keep in good repair for 180 days.If quality problems happen in guaranteed period, our company will maintain for free..
Check Stock

All Metal MK8 Extruder MYSWEETY 3D Printer Extruders Hotend Kit with 0.2/0.3/0.4/0.5mm Nozzle Print Head for MakerBot Prusa i3 Reprap 3D Printer 1.75mm Filament Supported

  • Assembled mk8 extruder come with 4 print nozzles.
  • It is compatible with most prusa i3 3d printers with some slight modifications when mounting it..
  • Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing..
  • Nema 17 high quality stepper motor with larger torque and less heat buildup..
  • Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably..
Check Stock

Flashforge Adventurer 3 3D Printer Leveling-Free with Removable Flexible Platform, Detachable Nozzle, Filament Detection, Built-in HD Camera, Wi-Fi Cloud Printing, Ultra-Mute Printing, Support ABS/PLA

  • ...additional a 0.3, 0.4, 0.6mm 265℃ nozzle..
  • 【Super Quiet & Small Device Size】 Adventurer 3 3D Printer equips with full color touch screen and the build volume 150x150x150mm..
  • 【Filament Detection&On-line Monitor Printing Process】Built in camera, records 3d printing process in real-time, allows you to monitor 3d printing status through FlashCloud or PolarCloud anytime. When filament runs out, the sensor pauses prints and sets off an alarm which saves materials and improves printing success rate..
  • 【Removable Flexible Platform】Quick release memory material platform plate is heated evenly, is resistant to bending and is not easily deformed. Platform can be heated up to 100°C in 5 minutes and easy to removed model with lightly press..
  • 【PLS NOTE】Flashforge 3d printer Adventurer 3 provides lifetime technical support and 12-month warranty. If you have any questions, please feel free to contact us..
Check Stock

YOYI YOYI 3D Printer Filament,PETG Filament 1.75mm 2.2lbs(1kg) Spool, Dimensional Accuracy +/- 0.03 mm,100% Europe Raw Material

  • 【High Print Quality】Minimum tolerance and low warping to ensure consistent feeding and smoothing prints. No clogging, no tangle, no bubble, extremely high success rate, resulting in printed parts that have an outstanding surface finish and are highly precise.Ideal for indoor printing..
  • 【PETG 3D Printer Filament 1.75MM】Diameter: 1.75mm.
  • Tolerances: +/- 0.02 mm. Stable 1.75mm PETG filament is good toughness not easy to break, high purity material leading smooth extrusion continuously fluent flow and no clogging. Strong adhesion and low shrinkage of 3D Printer Filament allows smooth first printing layer..
  • 【Print Suggestion】Tested for all filaments,please print according to the print temperature we provide(220℃ - 240℃)..
  • 【Service After Sale】Every PETG has been carefully designed and produced by us, And has undergone our comprehensive testing to ensure quality.We are full of confidence in YOYI YOYI products. If you are not satisfied or do not meet your expectations,Please contact us immediately, We will try our best to help you solve the problem..
Check Stock

SCRIB3D P1 3D Printing Pen with Display - Includes 3D Pen, 3 Starter Colors of PLA Filament, Stencil Book + Project Guide, and Charger

  • [READY-TO-USE KIT] Includes 3 colors (30 feet) of PLA plastic to keep you Doodling for ages, as well as a power adapter, step-by-step manual, and a free stencil guide. Just plug in, heat it up and enjoy the fun of creating three-dimensional masterpieces. PLA is a versatile, easy-to-use printing plastic that is great for both first time and advanced users..
  • [BEGINNER FRIENDLY] Plug the adapter into the back of the pen and choose your filament. The red light will turn on indicating warm up, this will take about 2-3 mins. Double click the forward button to start and feed the filament through the back of the pen. Once the filament has reached the nozzle of the pen, click forward to stop. Press and hold the forward button or double click for a continous flow. Once you have completed your design, press and hold the reverse button to retract filament..
  • [MULTI-FUNCTIONAL] The SCRIB3D P1 Pen is temperature adjustable to accommodate multiple types of filament: PLA (160-210℃, 320-410°F) or ABS (210-235℃, 410-455°F). Unlike other 3D printing pens, the P1 has an easy-to-use stepless speed slider, designed for optimal speed adjustment. Perfect for any task, from slow & intricate projects to faster infill work..
Check Stock