Top High Force Push Pull Solenoid

DORMEYER 1000-M-1 Solenoid, Open Frame, Pull, Continuous

  • Solenoid Type: Laminated Item: Solenoid Duty Cycle: Continuous Stroke Range: 1/8" to 1" Pull Force Range: 92.8 to 176.0 oz. Coil Volts: 120VAC Seated Amps: 0.48 Seated Watts: 19.0 Terminals: Solder Lug Coil Amps @ Max. Stroke: 6.50 Mounting Holes: 2 x 1-5/8" Gravity Value: 5.92 oz. Pull @ 1/2 In. Stroke: 13.0 oz. Pull @ 1/8 In. Stroke: 65.0 oz..
  • Pull @ 1/4 In. Stroke: 35.0 oz. Pull @ 3/8 In. Stroke: 20.0 oz. Pull @ 5/8 In. Stroke: 5.0 oz. Width: 2-1/16" Pull @ 1 In. Stroke: 1.0 oz. Length: 2-1/2" Pull @ 3/4 In. Stroke: 3.0 oz. Depth: 2-1/16" Coil Resistance: 14.9 ohm Country of Origin (subject to change): United States.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Digital Force Meter, 0N/100N/300N/500N Digital Display Dynamometer Force Gauge Push and Pull Tester Meter with 5 Side Heads for Industries Machinery (100)

  • HIGH QUALITY: This push-pull force gauge is made of high-quality metal + plastic materials, strong and durable, not easy to damage, and long service life..
  • TWO MODES: This digital push-pull force gauge supports peak/real-time two modes, adapting to changes.
  • it supports real-time display of values and also supports keeping the peak value unchanged..
  • INSTANT READING: high-definition large-screen display, high sensitivity, graduation value of 0.01, accurate value of thrust and pull, digital display design, reading is more intuitive, clear and convenient..
  • MULTIPLE UNIT CONVERSION: Newton, kilogram, pound and other commonly used measurement units can meet a variety of needs and are more convenient to use..
  • WIDELY USED: Digital push-pull force gauges are now widely used in electronics, high and low voltage electrical appliances, automobiles, chemicals, light industry, construction and other industries and scientific research institutions for tensile and compression loads, insertion and extraction forces, destructive test tests, etc..
Check Stock

Small Push-Pull Solenoid - 12VDC

Check Stock

Bitray DC 12V Magnetic Solenoid 5N Push Pull Open Frame Solenoid Electromagnet, Actuator Linear Motion 6mm Stroke Push Pull Type JF-0730B

  • Package Content : 1 x Electromagnet Solenoid Lock.
  • Easy to Install - It's with simple structure,and it can save the energy and the time during the installation for you..
  • With Low Use Cost - This electric lock use instantaneous power, can save power for you. So it can save money for you..
  • Small Size and Light Weight - It just takes up a small space which is perfect lock to be used for the small box or small cabinets, such as deposit box, cabinets, safes etc..
Check Stock

Digital Force 100K Meter Gauge Pull & Push Magnitude Test Tester Newton Meter N/kg / lb/g Measurement for Manufacturing, Electronics, Building Hardware, Textile, Auto Parts

  • Force Range: ±100kgf / ±980N / ±220Lbf (3 measurement unit for selection and conversion, kg, N, lb. ).
  • Simple and convenient multifunctional instrument for high-accuracy push force and pull force test, push and pull load test, plug and unplug force test and destructive test..
  • With data memory and output function. Can memorize 99 groups of data and transmit to computers by USB cable (Not included) or Bluetooth adapter (Not included) for further analysis..
  • Being installed with a variety of test bench and fixture, and come with different tips and hooks, it is an ideal test machine for different uses..
  • Digital display & quick response with no guessing or errors..
Check Stock

Gaeirt DC 12V Magnetic Door Lock, 280kg/617.3lb Holding Force Embedded Electromagnetic Lock with MOV, Strong Force Door Access Control System Kit

  • body Size : 68 x 42 x 31mm/2.7" x 1.6" x 1.2"(L*w*h).
  • Mount Hole Size : 13 x 5mm/0.51" x 0.2"(L*w).
  • mounting Hole center distance : 30 x 30mm/1.2" x 1.2"(L*w).
  • package content : 1 x door solenoid electromagnet.
Check Stock

Dormeyer 2005-M-1 Laminated Solenoid Replacement for All WM Models

Check Stock

uxcell DC Push Pull Type Solenoid Electromagnet, DC5V 18W 0.8N 10mm, Open Frame Type, Linear Motion

  • Pull push type, linear motion, plunger return, DC solenoid electronmagnet..
  • DC Solenoid Electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc..
  • Solenoids of this category work externally through pulling pushing in plunger..
  • When energized, doing work through pulling pushing in plunger joined object..
  • Material:Metal,Electronic Parts.Frame size: 13*16.5*30mm (W*H*L).Plunger Bar Size:6x58mm.Mounting Hole Dia.:2.5mm.Cable Length:20cm.(Unit conversion: 1mm=0.0393iinch, 1cm=0.393inch).
Check Stock

BAOSHISHAN Force Gauge Stand Push Pull Force Test Stand Manual Test Stand Vertical Spiral Type Stroke 220mm with 2 x HJJ-001 Clamp (APH Test Stand)

  • [PARAMETERS] -- Model: APH Push Pull Test Stand | Stroke: 220mm | Net weight: 5kg | Dimension: 490mm*210mm*140mm | ONE YEAR warranty and professional technical support.
  • [WITH HJJ-001 CLAMP] -- Each Force Test Stand comes with 2 HJJ-001 clamps, which can be installed on the digital force gauge for tensile testing. Screws and wrenches for installation are also included in the package..
  • [FOR PUSH PULL TEST] -- The tension test stand is specially equipped for DL, ZP series of push pull force gauge (not included), which can be combined to a test instrument for different purposes of tests..
  • [APPLICATION] -- The manual test stand is widely used in rubber and plastics, light industry, textiles, building doors and windows, composite materials, wire and cable industries, and tensile experiments..
  • [CUSTOMIZABLE] -- If you need a longer stroke test stand, please contact us for customization. The custom time is generally 4-5 working days, and our shop provides a one-year warranty..
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge Portable Force Meter with Units N/ LB/ Kg/ Oz, Storage Case, Auto Backlit LCD, Auto Power-Off (ZMF-500N)

  • 4 MEASUREMENT UNITS - The portable digital force gauge can switch between 4 units of N / Lb / kg / Oz.
  • 3 MEASUREMENT MODES - This pull gauge can switch three measurement modes (Real-time / PEAK / First-PEAK). In "PEAK" mode, it can hold the maximum force applied shown on the screen..
  • AUTO POWER OFF - The push pull scale can set the automatic shutdown time and automatically shut down without operation for a long time to achieve the effect of power saving. The auto shutdown time can be set within 0-15 minutes, and the default time is 10 minutes..
  • MIN FORCE SHIELDING - The dynamometer can be set to shield the display of data below 0.5% of the full scale. This function can be cancelled, and the instrument defaults to enable the minimum force shielding function..
  • APPLICATION - The handheld force gauge is widely applied in pull push load testing, insertion force or destructive experiment and industry like electric, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile....
Check Stock

Force Gauge,Knoweasy NK-300 Mechanical Analog Push Pull Gauge Force Measuring Instrument with Portable Carry Box

  • ✅【Simultaneous Display:】 Dual display two units of Kilogram & Newtons,no unit conversion..
  • ✅【Peak&Track Test:】 Switch freely between load peak (PEAK) test and continuous load value (TRACK) test..
  • ✅【Easy To Read:】Pointer indication for easy and accurate reading. An alternative to the old-fashioned tube-type push-pull force gauge..
  • ✅【Simple Operation:】Hand-held use or can be mounted on all types of work bench. Its Rugged construction and excellent accuracy make it ideal for Push/Pull measurements under any circumstances..
  • ✅【Wide Uses:】Widely used for tension and compression load,plug force, destructive test in electronics,high and low voltage electrical appliances,hardware locks,auto parts,viscose chemical industry,lighters and ignition devices,pens,light industry,construction,textile,machinery and other industries and research institutions..
Check Stock