Top High Frequency Chip Inductor

Elesunory 24 Values 240 Pcs Inductors Set I-Shaped Inductor 2.2uH to 100mH Cylindrical Plug-in Inductor Assortment Kit (Black)

  • ..., classified in 24 small transparent envelopes, each with 10 values. The rich and diverse product specifications perfect to work in your circuit work..
  • 【High Quality】Made of high-quality professional guide pins, stable performance, not easy to open circuit phenomenon, large current resistance, high self resonant frequency. The choice of values is perfect for filter design in power switching or audio applications..
  • 【Easy to Use】We distribute the inductors in plastic storage boxes (a single-compartment box that snaps closed), and stick a clear label on the surface of the box to provide users with the type of inductors they need, which is convenient and fast to use..
  • 【High Quality】 The plug-in I-shaped inductor uses fine materials, meticulous craftsmanship, compression and corrosion resistance, durable and practical, low energy consumption, stable performance, and each value is produced under strict standards, allowing you to get a perfect product..
  • 【Quality Service】This inductors assortment kit is of good quality. In order to optimize your shopping experience, we provide a 180-day free replacement service. If you have any questions about our products, please feel free to contact us..
Check Stock

uxcell 50Pcs 0510 Color Ring Inductor 33uH 1W Axial RF Choke Coil Inductor

  • USER-FRIENDLY:More user-friendly, it can be distinguished via the recognition value and the five color wheels..
  • HIGH PERFORMANCE:Working as the 1/4W metal film inductor set, this experimental inductor set is for high performance according to strict rule..
  • HIGH QUALITY MATERIALS:The inductor is made with high quality materials, it has stable performance and has long serving life..
  • SET INCLUDES:This product includes 12 general inductance values(1UH, 10UH, 22UH, 33UH, 47UH, 100UH, 150UH, 220UH, 330UH, 470UH, 560UH, 1MH), there are 10PCs for each value..
  • WIDE RANGE OF APPLICATIONS:This inductor is especially suitable for various electrical and experimental projects such as for Arduino, breadboards, general-purpose boards, and circuits..
Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

ADUCI BBYPP 1Pairs 200W Two Bass Crossover Treble + Midrange + Dual Woofer Speaker Crossover Audio 3 Way Crossover Frequency Divider 4-8OHM

  • The frequency divider for a treble, a midrange, two bass, the speaker can also use a single bass for high,Mid and low speakers, speakers for 4-8 ohm impedance, the design is to take 4-8 OHM public value design Of the market products are mostly the same, in order to better improve the sound quality,.
  • Material: Inductor with oxygen-free copper around the system, pure copper wire diameter thick, has been verified, 100% pure copper wire, never with enameled aluminum production.
  • capacitor with audio-specific non-polar capacitor, Need more, design reasonable, beautiful appearance,.
  • Size: 11 cm length, 7 cm wide, 2.5 cm thick..
Check Stock

MakerHawk Bluetooth Amplifier Board HiFi Stereo 2.1 TPA3116D2 2X50W+100W 12V-24V Audio Power Amplifier Module Bass and Treble Control for Store Home Theater Speakers

  • ...C protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage..
  • [High Performance] The TPA3116D2 is a Class D amplifier IC from TI that has very high index parameters. Advanced oscillator / PLL circuit uses multiple switching frequency options to reject AM interference. The modulation frequency can be up to 1.2MHZ, and the high power output distortion is less than 0.1%. This helps prevent noise..
  • [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you dont have a DC head adapter or battery, it can be easily wired..
  • [Application] With bass, treble and volume control, easy to adjust volume, enjoy the music tone what you want. TDA3116D2 is widely used in store solicitation, home theater, square speakers, etc.due to its excellent performance and comprehensive cost performance..
Check Stock

Haobase 25Value 250pcs DIP Inductor Assorted Kit 25 value 1uH to 1mH 0.25W

  • ▲HUAREW High Quality Color Code Inductor Assortment Kit.
  • ▲Model:20 Type-(1uH,2.2uH,3.3uH,4.7uH,6.8uH,10uH,15uH,22uH,33uH,47uH,100uH,150uH,220uH,330uH,470uH,680uH,1mH,2.2mH,3.3mH,4.7mH).
  • ▲Package Quantity: 200 Pcs (Each model 10 Pcs).
Check Stock

BOJACK 20 Values 200 Pcs Inductor 10 uH to 10 mH 1 W Color Ring Inductor 1 Watt Assortment Kit

  • BOJACK High Quality Inductor Assortment Kit.
  • Model:20 type-(10uH,15uH,22uH,33uH,47uH,68uH,100uH,220uH,330uH,470uH,390uH,560uH,680uH,1mH,1.5mH,2.2mH,3.3mH,6.8mH,4.7mH,10mH).
  • Package Quantity: 200 pcs (Each model 10 pcs), Packed in A plastic storage case.
Check Stock

AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier

  • EASY TO USE :The logarithmic power meter adopts AD8317 chip design, which is convenient to use, small in size, high in efficiency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
  • DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
  • DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
  • WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..
Check Stock

BOJACK 20 Values 200 Pcs Inductor 1 uH to 4.7 mH 0.5 W Color Ring Inductor 1/2 Watt Assortment Kit

  • BOJACK High Quality Inductor Assortment Kit.
  • Model:20 type-(1uH,2.2uH,3.3uH,4.7uH,6.8uH,10uH,15uH,22uH,33uH,47uH,100uH,150uH,220uH,330uH,470uH,680uH,1mH,2.2mH,3.3mH,4.7mH).
  • Package Quantity: 200 pcs (Each model 10 pcs), Packed in A plastic storage case.
Check Stock

MXR CAE Dual Inductor Wah Wah

  • Select between a yellow or red Fasel Inductor for two distinct tones.
  • Features a custom designed CTS extended life low noise potentiometer.
  • User selectable gain output stage with kick switch and LED indicator.
  • Designed with low noise Class 'A' Operational amplifiers.
  • Bright LEDs indicate effect status, Inductor Mode, and boost on or off mode.
Check Stock

AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mixer Single Chip Radio Frequency Converter -10dBm

  • The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency move detection and other applications.
  • The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive.
  • There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost.
  • The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use.
  • The amplifier has low DC offset characteristics, so it can be used in DC-baseband frequency conversion and quadrature amplitude demodulation.
Check Stock