Top High Frequency Wire

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • Features: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M....
Check Stock

Tertullus 1 Pair A10 RCA Cable Audiophile RCA Audio Interconnect Cable RCA to RCA Male Stereo HiFi Audio Cable 8N OFC Copper Silver Plated for Home Theater, Subwoofer,HDTV, Amplifiers 1.5m/4.92ft

  • ①　Strong And Rugged Cable,the Outer Diameter Of Cable Up To 8.54mm. Dark Blue Pure Cotton Braiding Net Design For Outer Sheath,anti-abrasion PVC Sheath Inside. High End Design..
  • ②　Sound Characteristics: The Sound Is Strong And Strong,the Background Is Quiet,the Low Frequency Is Thick And Steady,the Medium Frequency Is Sweet And Transparent.
  • The High Frequency Layer Is Distinct And The Resolution Is Good,the Full Frequency Transmission Performance Is Excellent,and The Sound Quality Is Excellent..
  • ③　The Wire Is Made Of Ofc Oxygen-free Silver Plated Conductor,the High Purity Ofc Conductor With High Density Shielding Using Containing 3% Silver Plated Solder Soldering Process.used Genuine 99.999999% High Purity Oxygen-free Copper Audio Signal Wire Can Maximum Signal Transfer,reduce Distortion And Signal Loss,to Keep Your Musical Device Performance..
  • ④　Gold-plated Rca Connectors Protection Which Has Good Anti-interference,effective Anti-oxidation And Stable Connection,reducing Information Attenuation And Ensuring Good Sound Quality Transmission..
  • ⑤　Suitable For An Amplifier, Subwoofer, Cd, Dvd, Etc..
Check Stock

2 JBL Pro JRX215 15 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 215

  • Features: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon....
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF....
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power....
  • Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover....
  • High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A.....
Check Stock

Audio Technica ATH-M70x Closed-Back Professional Monitor Headphones ATHM70x Bundle with Pair Presonus Eris E3.5 3.5' Powered Studio Monitors Speakers w/ Acoustic Tuning

  • ...g, mastering and audio forensics. Fold-flat design for space-saving portability. Detachable cables (includes 1.2 m - 3.0 m coiled cable, 3.0 m straight cable and 1.2 m straight cable). Specifications: Type: Closed-back dynamic. Driver Diameter: 45 mm. Magnet: Neodymium. Voice Coil: CCAW (Copper-clad aluminum wire). Frequency Response: 5 - 40,000 Hz. Maximum Input Power: 2,000 mW at 1 kHz. Sensitivity: 97 dB. Impedance: 35 ohms.
  • Lifetime Customer Service by Audio-Technica product experts. Guaranteed legitimate and authentic merchandise. Features: Pair PreSonus Eris E3.5 3.5" Powered Studio Monitors Speakers with Acoustic Tuning. 3.5-inch (89 mm) Kevlar low-frequency transducer. 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer. Rear-firing acoustic port for superior bass-frequency reproduction. Optimized, resonance-suppressing internal bracing. High- and low-frequency tuning controls.
Check Stock

KZ EDA Dynamic Driver Earbuds Combos,3 in 1 in Ear Monitor Wired Phone Earphones Headphones, HiFi Music IEM Headsets with Removable Cord Without Mic

  • THREE PAIRS OF EARBUDS – KZ EDA dynamic driver earphones combos set is tuned by KZ accoustic team many times for the outstanding sound quality. The price of one set of KZ EDA in ear headphones is equal to three pairs of earphones and three music styles to meet your listening needs. The low-frequency dynamic performance is excellent, the mid-high frequency is upgraded, and the three-frequency connection is smooth..
  • THE GOLD EARBUDS WITH EXTRA BASSY SOUND – Focus on optimizing the mid-lows, making the bass strong and elastic. Deep dive, strong and powerful drum beats, excellent low frequency transient performance, suitable for DJ and songs with heavy metal rhythm. The magnetic gap of 0.15MM brings stronger output performance, lower distortion rate, and more realistic restoration of sound..
  • THE SILVER EARBUDS WITH BALANCED SOUND – Referring to the Harman curve, the three-frequency is balanced and powerful, the vocals are clear and sweet, the low-frequency dives and the high-frequency is transparent, and the sound texture is strong, suitable for pop music and other genres. Customized 0.035MM diameter high tension voice coil wire makes the vibration frequency more stable and efficient..
  • TRANSLUCENT CYAN WITH HIGH-RESOLUTION SOUND – On the basis of ex....
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

ADT-Link R44SF / R24SF M.2 NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 35G/BPS(R24SF 10CM)

  • Wire advantages: Using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer..
  • Cable length: Our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing..
  • Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability..
  • PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen..
  • R24SF ,Connector 1: PCIe x4 ,Connector 2: M.2 NVMe SSD.
Check Stock

Muzata 165ft Crystal Vinyl Coated Wire Rope 1/8\ Thru 3/16\ WR07 and Heavy Duty 18\ Hardened Cable Cutter CR03

  • ...itable for DIY designs, commercial activities, wedding celebrations, and festival occasions.
  • This heavy duty cable cutter is hardened steel and great to clean cut 1/4" Stainless steel cable or galvanized aircraft wire rope cable. This cable cutter is Muzata nwest version has rounded tapered thicker jaws made of high frequency quenching of forging edge of chromium vanadium steel for clean cable cuts every time..
Check Stock

BOOSDEN Wire Cutter,6.5 inch Side Cutters,Wire Cutters for Crafting,Flush Cutter,Ultra Sharp Spring Loaded Wire Cutters for Jewelry Making,Flush Cut Pliers,Dikes Wire Cutters,Floral Wire Cutter,Snips

  • 【Material】BOOSDEN Wire Cutters are made of special steel,high-carbon steel, This small wire cutters blades are high-frequency hardened, Ultra....
  • 【Versatility】This diagonal wire cutters are suitable for cutting soft copper wire, plastic wire, small cable, aluminum wire, soft alloy wire, wire....
  • 【Body design】The handle of flush cutters pliers, flush cutter for jewelry making, has a rubber handle, which can play a protective role and....
  • 【Spring Loaded and Labor Saving】This diagonal wire cutters can improve efficiency, and the spring loaded wire cutters, cutting pliers, can reduce....
  • 【Friendly Reminder】Please kindly note that the jewelry wire cutters,cutting pliers, are non-insulated, please cut off the power before using this....
Check Stock

QWORK Cable Cutter, 24 Inch Stainless Steel Wire Rope Cutter for Cutting Steel Wire

  • Wire Cutters Material: 6 inch Wire cutter is forged by High-Carbon Steel, solid and durable. And snips cutters with plastic coated handle for comfortable and girp in daily use time..
  • Side Cutters Spring Loaded Design:The Spring-loaded side cutting diagonal pliers reduces muscle fatigue for easy one-handed operation..
  • Flush Cutter Size:6 inch cutting pliers are good size to fit in the hand of an average adult and not so heavy as to be a struggle to hold..
  • Diagonal Cutters Edge:Edge is high-frequency processing, sharp and durable, suitable for plastic flash,.electronic circuit welding thread pruning..
  • Floral Wire Cutter Application:Small wire cutters are for beaders, jewelers, electricians and crafters.Suitable for cutting plastic or soft electrical wire, not suitable for hard electrical wires..
Check Stock

QWORK Mutipurpose Cutting Pliers, Stainless Steel Diagonal Cutting Plier Assortment Kit

  • ✅【Durability】- 6 inch wire cutter made from high quality chrome-vanadium steel, the edge is specially hardened with high-frequency heat treatment, solid and durable..
  • ✅【Usage】- Suitable for cutting soft copper wires under, plastic, memory wires, head-pins, cords, cables, small chains, screen, soft iron wires, artificial flowers etc. CAN NOT CUTTING STEEL WIRE..
  • ✅【Ability】- Cutting pliers cuts soft copper wire 2.3 mm (13 gauge), plastic 3 mm, iron wire 2 mm (14 gauge), easier to cut most hard things..
  • ✅【Comfort】- Design of Ergonomic, PVC coated handle provides comfort grip to protect your arm when using this plier, handle is more spring returns tool to open position to reduce operator fatigue..
  • ✅After-Sales Service：Came with "3-Year Warranty" and " 45-Day Refund Guaranty". Buy with confident.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock