Top High Helix Carbide Burr

ACCUCUT I4KES 3/16 Carbide End Mill, 4 Flute, Square End, Ideal for Steel, Forge Steel, Copper and Alloys, 45 Degree Helix (5 Pieces)

  • GENERAL USAGE：Our end mill can be applied for steel, forge steel, copper, alloys & material < HRC 50.
  • SOLID CARBIDE：This end mill is made of ultra fine grain tungsten carbide. The hardness is 92 HRA.
  • AlTiCrN COATING：it features tough, resists wear & lubricity for smooth surface and heat protection.
  • 4 FLUTE CUTTER：great for speedy cutting. Ideal for planar, step, groove, forming surface & more.
  • 45° HELIX：high helix design can perform a better finishing cut than those with lower helix degree.
Check Stock

Carbide Burr Set, 20 PCS Double Cut Carbide Rotary Burr Set 1/8" Shank Dremel Bits, Dremel Carving Bits for Woodworking, Drilling, Metal Carving, Engraving, Polishing, Porting

  • 【ROTARY BURR SIZE SPECIFICATION】These carbide rotary burr set, with 1/8'' shank is made from Tungsten Carbide. Total Length:45-50mm, Cutting Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • 【DOUBLE CUT DESIGN】The groove lines of these carbide rotary burr's head are crossed, which makes it more suitable for materials produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control.with relatively low density, such as wooden, plastic and aluminum..
  • 【WIDE RANGE OF APPLICATIONS】 1/8” shank fits dremel and most small rotary tools with three jaw chuck for accurate centering. An ideal choice for your DIY woodworking, carving, engraving, and polishing..
  • 【HIGH QUALITY PROCESSING】Packed with plastic storage case for safety storage and protection. The working life of these solid rotary burr is 10 times longer than high-speed steel and 200 times longer than grinding wheel.The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
Check Stock

TianTac Tungsten Carbide Rotary Burr Set 10pcs Carving Burr Bits with 3mm Shank 6mm Bit for Wood & Stone Carving Steel Metal Working

  • Material: This carbide burr set/rotary bit set is made of premium tungsten Carbide steel which has long working life, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it..
  • Multi-Purpose: This rotary burr set includes everything you need for carving, engraving, polishing and removing sharp edges, being suitable for wood, stone carving, metal working and die grinders. The kit includes a massive selection of shapes for all types of cuts..
  • Great Processing Quality: with this burr set, the surface of your target is smooth after carving or engraving, therefore it can even process a variety of high-precision mold..
  • Those carbide burr rotary bit is generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute..
  • Full Customer Satisfaction, If you’re not 100% satisfied with your purchase, please get back to us, we will offer refund or replacement to make sure your full satisfaction..
Check Stock

HOMEIDOL Carbide Burr Set Die Grinder Bits Rotary Tool Bits 1/8 Shank 10 PC Double Cut Wood Carving Accessories Cutting Burrs Metal Grinding Engraving Polishing Porting Trimming

  • √【Material】Double cut carbide rotary burr set,tungsten carbide,can be used to process: iron, steel etc.. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 45-50 mm( 1.77-2 inch).1/8” fits dremel tool, straight shank can be held by most rotary tool with three jaw chuck for accurate centering.Please check the size before you buy it..
  • √【Durable】Carbide rotary burr's packed with nice plastic case for safety storage and protection. High efficiency, high-quality finish, long service life, good economic returns..
  • √【High efficiency and Practical】The rotary tools processing efficiency is higher than the manual file tool. 10 different types of carving kit drill bits, meet your different needs.No wear out after a long time use. The shaft will not bend at high speed..
  • √【Double Cut Design】 The double cut burr head groove lines of the head are crossed, produces a finer finish than single cut and reduces the size of the chips and slivers. It also gives greater tool control..
  • √【A Good Rotary tool】 A good choice of DIY carving, engraving, and polishing. Suitable for multiple types of rotating tools.Making DIY carving fans much easier to do the wood carving job.It is also an ideal gift for woodcarvers..
Check Stock

SL-3 Tungsten Carbide Burr Rotary File Taper Shape with Radius End Double Cut with 1/4\Shank for Die Grinder Drill Bit

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

10 Pcs Tungsten Carbide Burr Set – 1/4” Shank Double Cut Carbide Rotary Burr Set – Die Grinder Bits with Storage Box - Carving Rotary Bits for Deburring, Chamfering, Engraving, & Carving

  • Premium Quality Rotary Carbide Burrs: Want a perfect finish with least pull? Made of heat-treated Tungsten Carbide (YG10), next to diamond in hardness, these burring bits require less force to work through the hottest and strongest materials.
  • Multi-Sized and Multi-Shaped Die Grinder Bits Set: Stand out from the rest. Customize your product with 10 different sized 1/4” (6 mm) shank burr bits comprising of sizes SA-1, SA-3, SC-1, SC-3, SD-2, SE-3, SF-3, SL-1, SL-2, & SH-1.
  • Extensive Application: Regardless of the scale, this cutting burr bits set comes in handy while working with metals like aluminium and steel, wood, and plastics from large-scale industrial assembling to home repairs.
  • Double Cut Burr: Are you a perfectionist? If not, it will still give an ultra-sleek appearance to ferrous or non-ferrous metal, wood, or plastic with one-touch running convenience, owing to its double cut carbide burr.
  • Storage Box for Carbide Bits: We care for your convenience, so these metal burrs come in a properly arranged plastic box that works as an organizer. Hence, a must-have for the appr....
Check Stock

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

  • 【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
  • 【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
  • 【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
  • 【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....
Check Stock

Mars-Rock Carbide Burr Set Compatible with Dremel 1/8" Shank 20PCS Die Grinder Rotary Tool Rasp Wood Carving Bits Accessories Attachments Metal Grinding Engraving Cutting Trimming Porting Double Cut

  • The 20 Pcs carbide burr kit is a great variety of accessories for the dremel tool and any rotary tool. It's a must-have for any wood carver or metal engraver..
  • Great addition to rotary tools,micro pencil die grinder,compatible with Dremel,Apexforge,Beyond,Bosch,Dewalt,Fixtec,Foredom,Goplus,Goxawee,Hammerhead,Ingersoll-Rand,Makita,Maxman,Milwaukee,Pferd,Populo,Proxxon,Ryobi,Teccpo,Vastar,Wen,Workpro,Worx and so on..
  • Great and helpful to get into the corners to smooth out. Can be used for a multitude of craft projects..
  • Sharp,durable and well balanced. The carbide burr set cuts through hard materials like a hot knife through butter. No wear out after a long time use. The shaft will not bend at high speed..
  • Comes in a paper box and suitable plastic case which keeps the 20 PC carbide burr set tidy..
Check Stock

Tungsten Carbide Burr Set 1/8 3 mm Shank Die Grinder Bits 20 PC Cutting Burr Bits for Dremel Double Cut Rotary Burr Set for Metall Carving Engraving Drilling Polishing

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary files are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Pilim carbide bit have shank 1/8" (3 mm) - compatible with Dremel, DeWalt, APEXFORGE, Bosch, Ingersoll-Rand, Makita, Milwaukee, Beyond and other rotary tools with 1/8" collet. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

5Pcs Premium Tungsten Steel Carbide Rotary Burr Set 1/4inch Shank Double Cut Carbide Burr Set 8MM Head Die Grinder Bits for Die Grinder Drill DIY Wood-Working Carving Metal Polishing Engraving

  • 【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
  • 【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
  • 【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
  • 【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
  • 【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
  • Plus package comes with plastic case for safety storage and protection.
Check Stock

Tungsten Carbide Burr Set 1/4 Shank 10PC Double Cut Rotary Cutting Burrs Die Grinder Bits for Steel and Wood Working Grinding Carving and Engraving

  • Tungsten carbide - hardness, high strength, and durability. The service life is 8 times longer than that of HSS tool. Pilim double cut carbide rotary burr set can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade, marble, and bone..
  • Whether you are a master or a beginner, the Pilim rotary burrs are an indispensable tool for you. Milling out, leveling, deburring, cutting out holes, surface work, work on weld seams, door lock installation - Pilim rotary tool bits show good stock removal rate through optimum matching of tungsten carbide, geometry, cut, and available coating..
  • No matter what you do - jewelry making or welding, sculpting or tool making, engineering or high precision metalwork. Maybe you enjoy various DIY arts and crafts. Pilim carbide burr set contains everything you need for this..
  • Shank 1/4" - fit for most rotary tools and grinders. This die grinder bit set is easy to grasp and use, safe and reliable..
  • Use of Pilim cutting burrs - makes grinding or carving job easy. Shorten working time, improve the working environment and complete the project faster. Enjoy your creation!.
Check Stock

HIDOTOL Carbide Burr Set 1/4 Shank 10PC Tungsten Double Cut Carbide Rotary Burr Set for Metal and Wood Carving Grinding Polishing Engraving Drilling in Sturdy Round Case.

  • High Quality Material - HIDOTOL carbide burr set are made of premium heat-treated tungsten carbide material with high strength, hardness and durability, which is guaranteed to withstand the test of time..
  • Characteristics - 1/4" Shank fit for most rotary tools and grinders. This die grinder bit set is easy to grasp and use, safe and reliable.
  • double cut tooth angle which prevents chipping.It can be used on all types of metals, including stainless steel and hardened steel, as well as wood, jade and marble..
  • Specifications - 10pcs tungsten carbide burr set includes SA, SC, SD, SF, SL, SE and SH type burrs, different shapes can meet your need..
  • Widely Used - Precision metal work, engineering, sculpting, tool making, deburring, jewelry making or welding, or you enjoy various DIY arts and crafts. HIDOTOL carbide bur set are exactly what you need for premium results with rotary burrs..
  • 100% Satisfaction Guarantee - If you are not fully satisfied with our product for any reason, please feel free to contact us, we will try our best to serve you..
Check Stock