Top High Pass Filter

TOPSTRONGGEAR 1 Ohm 800 Watts Class D Full Range Mono Block Amplifier, 1/2/4 Ohm Stable, Remote Subwoofer Control

  • Class D MOSFET Mono Block Power Amplifier.
  • RMS Power at 1 Ohm:1500 Watts,RMS Power at 2 Ohms: 800 Watts,RMS Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 1 year Platinum Online Dealer Warranty.
Check Stock

Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power 1 Ohm Stable Class D Monoblock MOSFET Power Supply Remote Subwoofer Control

  • POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

NVX QBUS8P 300W Peak (150W RMS) Amplified and Loaded 8' Ported Under Seat Quick Bass Universal Subwoofer System with Remote Bass Knob

  • Space Saver - The combination of a built-in 300W amplifier that powers the 8” subwoofer makes this ideal for spatially challenged vehicles..
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the low-pass filter to primarily keep high notes out of your subwoofer. Adjust it from 50-150 Hz to best fit your system..
  • Ease of installation - Takes either speaker wire (High-level) or RCA cable (low-level) inputs. This makes connecting the QBUS8P to your radio easier since it's compatible with both factory AND aftermarket units!.
  • Automatic Turn-On - This circuit automatically turns the QBUS8P on whenever it senses an audio signal. This eliminates the need to run a remote turn on wire making installation a breeze..
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it..
Check Stock

TOPSTRONGGEAR 1 Ohm 1500 Watts Class D Full Range Mono Block Amplifier 1/2/4 Ohm Stable Remote Subwoofer Control Subwoofer Amplifiers

  • Class D MOSFET Mono Block Power Amplifier.
  • Max Power at 1 Ohm:1500 Watts,Max Power at 2 Ohms: 800 Watts,Max Power at 4 Ohms: 510 Watts.
  • Low Pass Crossover - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • Remote Subwoofer Level Control Included.Variable Bass Boost - Variable Bass Boost 0 to 12dB(50Hz) allows you to adjust the low bass within the boost range to just the way you like it..
  • Warranty -TopstrongGear provides a powerful 1 year Platinum Online Dealer Warranty.
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Alpine Electronics S-A32F 4 Channel Amplifier

  • Rms power bridged 2 x 160 W @ 4 Ohms: 14.4V.
  • Class D (digital) amplifier.Channels: 4/3/2 channel (stereo).Temperature monitoring.Automatic switch-on Function.Crossover: adjustable low pass filter (LPF)/ high pass filter (Hpf).
Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

SFB-1000D - Sundown Audio Monoblock 1750w RMS Amplifier…

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm:....
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal....
Check Stock

JBL Stage A6004 4-Channel 50W X 4 Full Range Amplifier

  • General specifications Power output90wx4@4ohms frequency response20-20khz±1db thd@rop1%.
  • Input Sensitivity0.2V-5v high Pass filter, variable32-320hz low Pass filter, variable32-320hz bass eq@45hz0-12db protectiondc, OVP, UVP, OCP, OTP.
Check Stock

ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Amp+Bass Knob

  • Package Includes: (1) ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D Amp. (1) ALPINE RUX-KNOB.2 Remote Control Bass Knob For....
  • Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible. Specifications: CTA-2006 Power Rating: 100W RMS x 4 + 500W x 1 (2.
  • Dual speaker terminals simplify the hookup of multiple speakers. Heavy duty aluminum alloy heat-sink. Input sensitivity: High level: .5 - 10V Low....
  • Variable high-pass filter: 50 - 400Hz, -24dB/octave. Variable low-pass filter: 50 - 400Hz, -24dB/octave. Subsonic filter: 8 - 40Hz. Variable Bass....
Check Stock

MTX Audio JH7005 Jackhammer Series 700W 5-Channel Class-AB + D Car Audio Amplifier

  • 4 Ohm: 60 watts x 4 ch. + 275 watts x 1 ch. | 2 Ohm: 90 watts x 4 ch. + 450 watts x 1 ch. | 4 Ohm Bridged: 180 watts x 2 ch..
  • Frequency Response: 20Hz - 20,000Hz (Main Channels) + 20Hz - 250Hz (Subwoofer Channel) | High Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct | Low Pass Filter (Variable): 40Hz - 250Hz 12dB/Oct.
  • Subsonic Filter (Variable): 20Hz - 50Hz 12dB/Oct | Bass Boost (0 - 12dB): 45Hz.
Check Stock