Top High Position Jack Stand

CablesOnline 3.5mm TRRS Female to Dual TRRS Male Stereo 4-Pole Splitter Cable IP-Y03

  • (1) 3.5 mm Mini-Jack (4 Position-TRRS) Female Jack.
  • (2) 3.5 mm Mini-Jack (4 Position-TRRS) Male Plug.
  • Gold-plated molded connectors with strain relief ensure a solid high quality connection between the connected devices.
Check Stock

CPROSP Scissor Jack 2 Tons(4,409 lbs) Capacity with Ratchet Handle Effort Saving

  • ADJUSTABLE HEIGHT: The height of the motorcycle lift jack can be adjusted to meet your specific needs. And its minimum height is about 6.7” (saddles installed) and its maximum height is about 15.75”..
  • 1100LBS WEIGHT CAPACITY: With main frame made of steel, the motorcycle lift stand can support up to 1100lbs. And its own weight is about 14kg/30.9lbs..
  • SAFETY PIN FOR EXTRA SECURITY: The motorcycle lift jack is designed with a safety pin which can reduce the possibility of falling down during use and provide extra safety..
  • ADJUSTABLE SUPPORT SADDLES: The position of the support saddles can be adjusted horizontally by loosing and tightening screws on them. You can adjust the support saddles based on your needs..
  • SIMPLE OPERATION: To use the item, just install the support saddles, attach the handle to to lift stand and then rotate it to adjust the height to your desired height. ( It is suggested to wear gloves when operation.).
Check Stock

BISupply Tandem Wheel Ramp – 5.5in Tire Lift Trailer Wheel Jack RV Flat Tire Ramp, Concave Portable Ramp, 1 Pack

  • ...CONCAVE RAMPS PROTECT YOUR TIRES: Whether you are storing your collectible chassis, or just putting a snowblower or RV away for the season, these trailer tire jack ramps are perfect for the job.
  • With a unique concaved design, these RV jack ramps preserve the shape of your tires by allowing them to rest in a rounded position when parked making them ideal for long-term storage.
  • BUILT TO LAST: Constructed of durable polypropylene (PP) plastic, these travel trailer jack stand ramps are designed for maximum strength and durability.
  • Resistant to UV rays and rust, the dark black color will stay vibrant for years to come.
  • The textured surface provides superior traction to help guide your wheel up the ramp, while the grooved bottom (teeth) will keep your plastic car ramp from sliding on the ground.
Check Stock

Xenyem 1300lbs 2 Stage Telescopic Transmission Jack w/ 360°Swivel Wheels Lift Hoist, Adjustable Height Telescoping Transmission Hydraulic, w/Pedal, 35\ to 70\ Lifting Range - Yellow

  • Increased load capacity - hydraulic jack load capacity from 1100 lbs (0.5 tons) to 1300 lbs (0.6 tons).
  • Upgraded Version - upgraded with dual spring, higher pressure, increased the stability and load capacity,as well as the lift speed than single spring..
  • Adjustable - Featuring a telescoping 2-stage hydraulic ram, the transmission jack can be extended from 35.43" to 70.86" in height..
  • Stability and Ease of Movement - Wide heavy duty four foot base and 4 cast iron swivel 360 degree casters, auxiliary ring in the middle of the transmission jack and cast iron swivel casters add ease of movement and greater maneuverability..
  • Precise Positioning - The adjustable saddle provides a wide tilt range to help you place the load in the perfect position. The pallet can be tilted up to 30 degrees. Adjust the angle and position you need by twisting the adjusting bolt, allowing you to position and align the transmission more precisely..
  • Material - The hydraulic jack is constructed of high grade steel for quality and durability. The painted surface prevents rusting..
  • Application - The floor jack can be used in many places, including automotive transmissions, auto repair stations and other objects weighing up to 600KG..
Check Stock

Powerbuilt 3 Ton Bottle Jack and Jack Stands in One 6000 Pound All-in-One Car Lift Heavy Duty Vehicle Unijack 640912

  • SIMPLY GENIUS: You'll love the speed, size and convenience of this clever jack that combines a bottle jack and jackstand in one compact unit..
  • LIFTS AND HOLDS YOUR VEHICLE: A built-in ratcheting safety bar ensures the jack stand stays locked in the raised position..
  • PERFECT FOR SUVs and TRUCKS: 3,000-pound capacity and a lift range of 11 to 21 inches makes it ideal for pick-up trucks, SUVs, vans, RVs and trailers..
  • GREAT FOR RV AND OFF-ROAD USE: A wide base adds stability anywhere and reduces "sinking" under load on softer surfaces - ideal for levelling RVs and trailers.
  • BUILT TO LAST: Meets or exceeds ANSI standards and protected by a 1-year factory warranty.
Check Stock

Powerbuilt 3 Ton Bottle Jack and Jack Stands in One 6000 Pound Capacity All-in-One Car Lift Heavy Duty Vehicle Unijack Wide Base 640471

  • SIMPLY GENIUS: You'll love the speed and convenience of this clever jack that combines a bottle jack and jackstand in one compact unit..
  • LIFTS AND HOLDS YOUR VEHICLE: A built-in ratcheting safety bar ensures the jack stand stays locked in the raised position..
  • PERFECT FOR SUVs and TRUCKS: 3,000-pound capacity and a lift range of 11 to 21 inches makes it ideal for pick-up trucks, SUVs, vans and jeeps..
  • GREAT FOR RV AND OFF-ROAD USE: A wide base adds stability anywhere and reduces "sinking" under load on softer surfaces - ideal for levelling RVs and trailers.
  • BUILT TO LAST: Meets or exceeds ANSI standards and protected by a 1-year factory warranty.
Check Stock

OTC 1540 4-Ton Capacity Fork Lift Jack

  • OTC's 4-Ton (8000 lb.) Capacity Fork Lift Jack features a low starting height of 2-5/8 inches and a maximum lifting height of 16-1/4 inches.
  • Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
  • Jack features include high-quality seals and high-strength steel construction.
  • 30 inch long handle, with stop, makes for easy maneuverability around the shop or workspace.
  • Rugged construction and high-grade materials ensure quality performance over the lifetime of the jack.
Check Stock

RVGUARD RV Stack Jacks 4 Pack with Storage Bag Aluminum Stabilizer Jacks for RV Trailer Camper Single Support Up to 6000 Lbs Adjustable from 11 to 17

  • 【What will You Get】4 Pack RV Stack Jacks come with a colorful storage bag, which are ideal for stabilizing and leveling your RV, great stabilization solution for your RV, trailer and camper, etc.
  • 【Make Your RV Stable】These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with square base design, each can support up to 6000lbs, with which you needn’t to worry about your RV move or bounce anymore.
  • 【Height Adjustable】The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise.
  • 【Easy to Use】Simply position each stack jack stand underneath your RV, and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use.
  • 【Lightweight & Portable】 These RV jack stands weight less than 40 lbs in total, and they come with a colorful organize bag.
  • besides, when not use, they can be compact nested together for easy storage.
Check Stock

OTC 1750A 6000 lb. 'Revolver' Diesel Engine Stand with Universal Engine Adapter Assembly

  • OTC's Diesel Engine Stand features robust materials and construction to effortlessly support heavy truck diesel engines or transmissions for rebuilding and other procedures.
  • 96-to-1 ratio worm and gear set smoothly rotates the mounted engine a full 360 degrees for easy access to any component or location on the engine.
  • Built-in 12-ton jack raises the engine or transmission on the stand to provide the swing radius necessary for full rotation clearance.
  • 2 large metal front wheels and 2 rugged rear casters allow for full maneuverability of the stand, loaded or unloaded.
  • Included No. 205061 Universal Engine Adapter Assembly permits use with a wide variety of mounting plates (not included) that fit most heavy duty diesel engine and transmission applications.
Check Stock

Heavy-Duty Malleable Casting Iron Wall Jack for Lifting Wall Beams Decks and More with Capacity of Lifting 1,000 lbs, Red, Pack of 1

  • 1.Lifting Wall Easily – Designed to lift up walls, beams, or more into the vertical position or the desired position..
  • 2.Work Alone – Allows a single person to safely raise a fully sheathed wall by the wall jack, lifting a wall with no help.
  • NOTE: Do not stand under the wall when working.
  • For large walls, two wall jacks are recommended in use..
  • 3.Casting Iron – Made of heavy-duty and durable malleable casting iron which is weather-resistant and reusable.
  • 4.1 " OD Pipe and 2" x 4" Pole – OD 1" pipe can be used as a lever that wall will be lifted up along the 2"x 4" (actual size is 1.5" x 3.5") pole. NOTE: Please use a clear straight-grained 2" x 4" pole that is free of all knots or defects.
  • 5.Package Included - 1 pack of Wall Jack (1” pipe and 2"x4" pole are not included).
  • Backs its products with 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

CARTMAN Car Jack Stands, 2 Ton (4,400 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for UTV ATV Van Sedan, 1 Pair

  • Constructed with the sturdy stamped steel with a welded frame design for durability..
  • Pair of 2 ton jack stands with 4000 lbs capacity total (when used together) help support vehicles after lifting with a jack..
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 10.6" to 16.5"..
  • Wide pyramid foot base and large top saddle provide enough stable support to keep safety. Use on a level surface! Always use a jack stand on flat, stable ground..
  • Meets US safety standards and includes a limited 2-year manufacturer warranty..
Check Stock

Dulytek DHP20 Hydraulic All-in-One Heat Press Machine 20-Ton Force with Driptek Mount Stand Enclosed

  • POWERFUL & EFFICIENT: Maximum Pressing Force Up To 20 Tons.
  • Removable 40000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
  • LIKE DHP7 BUT MIGHTIER : 3" x 8" Dual Heat Plates with Precise Two-Channel Temperature Control & Press Timer.
  • DRIPTEK FEATURE: New DripTek Mount Stand Can Tilt DHP20 Press UP To 90 Degrees And Hold The Position While Fresh Concentrate Flow Dripping Off Plates....
  • Ergonomic Handle Design Allows You to Move the Press Conveniently.
  • DISCREET PACKAGING: DHP20 Press, DripTek Mount Stand, Operation Manual, Enhanced Pump Handle..
Check Stock