Top High Power Attenuator - BuyWiseBest.com

Supco Q103 Sequencer

Choose between Eurorack power, FRACK power (panel is still Eurorack format), or 9V battery/wall plug.
Coarse & fine clock adjustment - Switchable linear 'random' function with speed adjustment - Momentary & Hard Hold Function - Manual Step Button - Internal/External Clock Switch - Reset Input Jack - Current draw is 20mA - Size: 3U 20HP - Module depth (Eurorack version): 1.5 inches.
3 CV Outs, each with their own attenuator, 0-5 volt output..

20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.

This is an RF power meter, which is operated by buttons..
Advantages: simple structure, convenient use, stable performance, reliability, high sensitivity and fast measurement speed..
Application: RF power measurement, instrument calibration.
Measuring power range: -50~+0 dBm (external RF attenuator can be extended to 100dBm).

Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
Objects Used :Suitable for a variety of RF and IF applications..
Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..

Can be built with FRACK power (panel is still Eurorack format), or 9V battery/wall plug.
3 CV Outs, each with their own attenuator, 0-5 volt output..

High quality Electronic components and circuit design keep your tone clear and pure. Keep the dynamics and tone of your amps sweet spot at lower levels..
True bypass. Running through the FX loop and controlling the amount of signal sent to the power section. Let you really push the front end of your amp for the natural feel and tone..
Easy-to-use passive attenuator. Passive design doesnt require any power. The LED only displays whether the pedal is on or not..
Set output level to minimum immediately by tapping MINIMUM footswitch On board knobs and switch provide flexible sound character..
DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDED).

The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
【What you will get】 1 x HT201 Signal Attenuation.
【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..