Top High Pressure Bolts

RockShox Air Pump (high Pressure/high Volume Convertable) Boxxer

  • 2-in-1 aluminum barrel design for fork or shock inflation by converting between single-stage (high pressure) or two-stage (high volume) actuation.
  • 360 degree swivel hose with finger-tap bleeder, flip-out ergo handle, and no-leak swivel Schrader valve head with Presta adaptor.
  • Includes water bottle-boss mounting clip with bolts and Velcro security strap.
  • Removable 300psi gauge with protective rubber casing and rubber lanyard covers for gauge attachment and pump head.
Check Stock

Deburring External Chamfer Tool, Deburring Chamfering Drill Bit, Bolt Deburring Tool Stainless Steel, Remove Burr Tools Quick Release Hex Shank Fits 1/2″to 1-3/8″ (13mm-35mm)

  • ... with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
  • 【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don’t need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
  • 【Optimal Compatibility】Deburring external chamfer tool fits 1/8′ (3mm) to 3/4′ (19mm). Operate with sufficient lubrication and less than 500 RPM.Hex shank with quick release design, fits most drills. Can be used to repair damaged/flatted bolts of virtually any material..
Check Stock

EWK 53 Pcs Harmonic Balancer Puller Set Steering Wheel Puller Crankshaft Pulley & Gear Puller Flywheel Removal Tool

  • 【 Must Have 】EWK harmonic balancer puller set applies equal pressure to the hub, helping to remove harmonic balances, crankshaft pulleys, and steering wheels safely..
  • 【 Mutiple Use 】Includes 30 different bolts, a pressure screw, 3 adaptors, 18 washers, and a 4-slot yoke that allows you to use with flywheel, crankshaft, steering wheel, pulley and other two or three-hole applications..
  • 【 Completely Kit 】This puller kit includes the most needful SAE and metric bolts sizes (1/4""-28, 5/16""-18, 5/16""-24, 3/8""-16, 3/8""-24, M8x1.25, and M10x1.5) and washers sizes (ID 6mm, ID 8mm, ID 10mm, ID 12mm)..
  • 【 High Quality 】Crafted from heat treated carbon steel with oxide finishes ensures maximum strength, helping the tool withstand tough pulling jobs and resist rust..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

Utoolmart Deburring External Chamfer Tool Drill Bit Remove Repair Tool, High Manganese Steel 2pcs

  • 【Easy to Use】- Using the lowest speed on the drill bit, then slightly applying pressure to remove..
  • 【Material】- Made of High Manganese Steel material with better deburring effect, high strength and hardness..
  • 【Efficiency】- Quickly repairs damaged bolts and tightens the nuts in place, simplifies the repair process, eliminates the need to replace expensive or hard-to-find hardware..
  • 【Function】- The deburring outer chamfering tool can easily scrape the outer edge of bolts, pipes or bars to remove burrs..
  • 【Wide Application】- Effective on Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic. Besides, it also can be taken as bottle opener..
Check Stock

Glarks 204Pcs M8 Metric 304 Stainless Steel Phillips Round Head Machine Screws Hex Socket Head Cap Screws and Hex Head Screw Bolts with Hex Nuts Flat Washers Lock Washers Assortment Kit

  • ...ean thread to achieve tight connection, not easy to fall off and loosen, smooth thread are easy to install without any binding. And professional hex head will be convenient for getting a firm grip or tightening with a torque wrench for evenness. Hex Nuts, flat and lock washers can expand the contact area and reduce pressure in order to protect the screws and parts..
  • ➤[Wide Application]: These 304 stainless steel screws, nuts and washers are professional fittings for indoor and outdoor use. Widely used in all kinds of precision machinery, household appliances, communication products. Suitable for amateurs, professionals, repairers and other DIYers..
Check Stock

TentandTable 36-Inch Square Solid Birch Wood Folding Table | 30-Inch Height | Heavy Duty | Aluminum Edge | for Weddings, Parties, and Events | 4 Pack

  • 3' Square Top (36") - Pack of 2 - 3/4" thick clear faced plywood made from birch wood, sanded smooth without voids and patches, sealed on both sides with a protective polyurethane finish. Legs secured to top with flush flat head carriage bolts, lock washers, and nuts..
  • Aluminum edging is high-pressure crimped to the top - no adhesives used. Legs secured to top with flush flat head carriage bolts, lock washers, and nuts..
  • Legs made from 1" diameter, 16-gauge, cold-rolled, silver powder-coated steel tubing. Continuous weld joints. Black plastic glides pressed into ends of legs..
  • Hinged diagonal brace allows legs to fold. Full-length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking..
  • Perfect for weddings, banquets, picnics, restaurants, events, and more!.
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

Mingdun 4 Bolt Replacement Manifold Pressure Washer Manifold Kit with Unloader for 16031 190627GS 190574GS 020228 EXWGV1721

  • Fitment: Pressure Washer Manifold Kit 16031 190627GS 190574GS..
  • Package included: 1*Chemical Injector 1* Inlet Check Valve 4 *Mounting Bolts 4 *Mounting O-Rings.
  • Fitment: Pressure Washer Manifold Kit 16031 190627GS 190574GS. Package Include:1 Chemical Injector, 1 Inlet Check Valve, 4 Mounting Bolts, 4 Mounting O-Rings..
  • Replaces: Part #16031 190627GS 190574GS..
  • Note: Please review all the product information to ensure that this product is compatible with your original unit. And you can feel free to contact us if you have any questions about our products..
Check Stock

Pit Posse Drive Spinning T-Handle Wrench – 3/8” Ball-Bearing Rotating 3/8 T-Handle Tool – Remove Or Install Your Bolts Faster – Motorcycle Tools

  • ...IPPING- The T-Handle wrench has a textured aluminum handle on the shaft that allows for an easy and secure grip on the tool yet allows the t-handle to spin with virtually zero drag for extremely fast removal and installation of bolts and other fasteners. The grip is fixed onto the shaft and will enable you to apply pressure comfortably..
  • ✅REMOVE OR INSTALL BOLTS FASTER- The collar has bearings and allows the t handle to spin and help you take your bike apart or put it back together faster. Once you have felt the spin, you will never be able to go back to your standard T-handles again. The t handle allows you to apply pressure to the fastener that you're taking in or out and then spin it very quickly in and out to get the job done fast..
  • ✅THE PERFECT ADDITION TO YOUR TOOLBOX- Our spinning T-handle is the go-to tool for all motorcycle enthusiasts. If you’re doing a lot of work on engine cases or many bolts, you’re going to love this tool! Perfect for motorcycles and bicycles. Works great for working on or rebuilding motorcycle engines, and a great tool to have when you have plenty of bolts to spin down. You need this in your toolbox!!.
  • ✅ YOUR SATISFACTION IS OUR #1 PRIORITY- We take pride in manufacturing motorcycle parts that save you time and ....
Check Stock

Odowalker 4 Pcs HSS Deburring External Chamfer Tool,CR12MOV Steel Hex &Triangle Shank Burr Remover for Drill Bit Fits for Bolts 4mm-19mm

  • Size:Suitable for Bolts (4mm/0.16 inches -19mm/0.79 inches).
  • Easy to Assemble & Use: Fit in drill. Pop it into the drill and apply light pressure to cleaned up the ends of the bolts.
  • Wide Application:High strength, high hardness. Suitable for stainless Steel, Hardened Steel, Mild Steel,Low Carbon Steel,Copper, Brass, Aluminum, Fiberglass, Wood, Plastic, no matter it is with or without screw thread.
  • Safe To Use: Featured with simple and safe design, no cuts, sparks, or burns, fewer injury will happen when using it.
Check Stock

OLSON SAW CB50000BL 14-Inch Delta Band Saw Accessory Cool Blocks

  • An innovative feather board design that provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 2 each of 5/8" And 3/4" Metal miter bars, that fit all standard miter slots and four 1/4" T-track bolts.
  • Mounting hardware included for nearly any dual or tandem application - 3/4-inch and 5/8-inch wide miter bars and T-slot bolts fit most table and band saws, Router tables, and fences.
  • Includes sturdy spacer for tandem Feather Board operations.
  • Dual slide motion - Side to side and forward action for quick and easy setup.
  • Unique pre-load tension Design - quickly set tension for consistent cuts while reducing the chance of kick-back.
  • Split rail miter bar construction - provides maximum hold.
  • Mounting Hardware Included for nearly any dual or tandem application - 3/4-Inch and 5/8-Inch wide miter bars and t-slot bolts fit most table and band saws, router tables, and fences.
  • Includes sturdy spacer for tandem FeatherBoard operations.
  • Dual Slide Motion - Side to side and forward action for quick and easy setup.
  • Unique Pre-Load Tension Design - Quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

Amerbm Heavy Duty Pitman Arm Puller Adjustable Jaws Bearing Puller Pull & Repair Pitman Arms, Bearings, Collars, Gears, More Light Truck & Car Repair Tool

  • Application: Amerbm heavy duty pitman arm puller is designed to remove the pitman arm shaft in cars and light trucks 3/4 ton. It can also be used for bearing, collar and gear removal..
  • Design: Features forged adjustable jaws and two clamp bolts that lock jaws together. Two clamp bolts lock the jaws on the pitman arm ensuring a solid grip..
  • Material: Made of #45 carbon steel, black oxide finish resists corrosion and rust. Adjustable and have rugged forged jaws shaped to fit the job..
  • Function: Pressure screw has ball head designed for striking. This tool includes an adapter for added versatility and both pullers cover a variety of pulling jobs. Similar to OEM 27170..
  • Package: Pressure Screw, H-Frame, Jaw Bolt, Jaw, Clamp Bolt and Wing Nut, Pressure Screw Adapter..
Check Stock