Top High Pressure Hydraulic Hose Crimper

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

VEVOR Hydraulic Hose 3/8 inch x 100 ft, Coiled Hydraulic Hose 4800 PSI, Rubber Hydraulic Hose with 2 High-Tensile Steel Wire Braid, Bulk Hydraulic Hose -20°C to 140°C, Hydraulic Oil Flexible Hose

  • 【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers..
  • 【100 FT HYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 3/8 inch, and the outer diameter 3/4 inch. With a 4800 PSI working pressure, the hydraulic line is explosion-proof..
  • 【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion..
  • 【INCREDIBLE FLEXIBILITY】- Wire hose layers provide flexibility and versatility to allow you to install your rubber hose and hydraulic fittings in tight quarters for less vulnerability. It can work between -40 °C and 121 °C..
  • 【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system..
Check Stock

Industrial Hydraulic Cable Lug Crimper 16TON 9 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit Includes 13 pairs of Die Sets

  • 【Quick crimper 】This hydraulic crimper provides hexagonal confining pressure with 13 pairs of hexagon crimping dies ( (AWG: 9.8.6, 4, 2, 1/0, 2/0, 4/0, MCM: 250,300, 350, 500, 600).
  • 【Labor-saving operation】Oil return valve , quick pressure relief allows the piston to quickly reset.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch..
  • 【Excellent service】100% money back guarantee. All items have been double inspected before on market.
Check Stock

marddpair Hydraulic Hose Crimper Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool with 7 Die Set Fit for Barbed and Beaded Hose Fittings

  • Dies size: The hose crimping tool has complete dies covering hose sizes 6, 8, 10, 12(5/16, 13/32, 1/2â€, 5/8) and reduced barrier 8, 10, 12(13/32,....
  • Material: This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability..
  • Stamper hardness: Stamper hardness can reach up to 53 HRC, making the crimping effect better..
  • Advantage: This tool is easy to operate and save your time and energy. It is light-weight and compact, suitable for narrow space. Always wear safety....
  • Application: The hydraulic crimper is ideal for shop and field operations, barbed and beaded hose fittings..
Check Stock

10 Ton Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8 to 3/16 Cable -Wire Swaging Tool Kit with Stainless Steel Cable Cutter

  • 【DURABILITY】Made of durable materials, high strength and good toughness. And dies are made of hardened steel with chrome finish. It also provides....
  • 【SPECIFICATION】Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic....
  • 【HUMANIZED DESIGN】With this professional crimper, you can crimp wires and butt connectors easily. It is much easier than using a pair of hand....
  • 【Size】Hydraulic Hand Crimper Tool: Length:approx.310mm, Weight:approx.N.W1.75kg G.W3kg. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • 【Package List】Includes Hydraulic Hand Crimper with 9 sets of the crimping dies, seal rings, strong protective carrying case, cable cutter and pair....
Check Stock

Muzata 45Ton Upgraded Custom Hydraulic Hand Crimper Tool for 1/8 Stainless Steel Cable Railing Kit Hardware Wire Rope Swaging Kit with 1Pair 1/8 Dies CR09 CT1

  • Custom Designed for Stainless Steel -- This hydraulic crimper tool is forged and custom-designed to provide 45 tons of crimping force, making it....
  • Simple to Use --The crimper is designed with a pressure release system to let you know when the swaging process is complete. The comfortable ergonomic....
  • Wide Applications -- This Muzata crimper CR09 fits 1/8" cable railing kits. It also matches regular crimping dies to crimp aluminum ferrules or copper....
  • Pre-designed systems -- This product belongs to some pre-designed cable railing systems released recently. We have planned everything you need for....
  • Upgraded -- We have upgraded this crimper consistently to resolve the problems like broken head or leaking oil after multiple times of crimping. If....
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shippi....
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, sh....
Check Stock

Cr Agricultural Truck Hydraulic Bead Breaker 10,000PSI Kit with Foot Pump and Air Hose

  • Self-retracting and the working range of our bead breaker is up to 4".
  • The tractor truck tire hydraulic bead breaker changer packaging inclufed hydraulic foot pump and 78" air hose.
  • Pressure Range: 40-150psi (2.8 to 10.3Bar).
  • High-quality and high performance hydraulic bead breaker is able to effectively break beads in seconds by 10,000 lbs of force.
  • Hydraulic action, suitable for breaking beads on commercial and agricultural tyres, and it can be applied in any 1, 2 and most 3 piece 2-5-10 hole budd and all tubeless truck tires rims, including some new style wheels.
Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

Senmit Hydraulic Crimper with 11 Die Sets– Premium Quality Industrial Hydraulic Cable Lug Crimper – Solid Electrical Terminal Cable Wire Crimper –20 US Ton Capacity – 6 Gauge through 600mcm

  • COMPLETE CRIMPER KIT: This lug crimper includes everything you need for a smooth and user-friendly experience: hydraulic crimper, 11 dies (AWG: 6, 4, 2, 1/0, 2/0, 3/0, 4/0, MCM: 300, 350, 500, 600) and a portable, heavy-duty storage case..
  • CAPACITY: This industrial lug crimper has a true 20 US ton capacity, being designed for 6 gauge through 600mcm, providing perfect crimp terminations with every use..
  • WIDE APPLICATIONS: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable lug crimper will do an outstanding job..
  • HEAVY DUTY DURABLE CONSTRUCTION: Featuring a black oxide crimp head and dies which are guaranteed not to chip or flake, this lug crimper is much better than classic chrome-plated models, for an enhanced performance..
  • EASY TO USE: 4 steps to perfect crimping: install the die set that matches your terminal size, rotate the release valve in order to close it, pump the handle until the resistance felt becomes significant and open the release valve by rotating to the left..
Check Stock

Senmit 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8, 3/16 Stainless Steel Cable Railing Fittings, Heavy Duty Head, Come with 8 Pairs Dies and Cable Cutter

  • 【COMPLETE CRIMPER KIT】: This cable crimper includes everything you need for a smooth and user-friendly experience: hydraulic crimper, Cable Cutter, 8 dies (Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG) and a portable, heavy-duty storage case..
  • 【CAPACITY】: This industrial lug crimper has a true 10 US ton capacity, being designed for 1/8 (6 mm Die) 3/16 (10 mm Die) stainless steel cable railing and aluminum or copper wire, providing perfect crimp terminations with every use..
  • 【HEAVY DUTY DURABLE CONSTRUCTION】: The head of crimper is made of durable steel with stainless steel coating, strength and good toughness. The Oxide Crimp Head and Dies won't chip or flake. Dies are made of more hardened 40cr steel, this cable crimper is much better than classic chrome-plated models, for an enhanced performance..
  • 【WIDE APPLICATIONS】: Whether for battery and welding cable, building wiring, crimp heavy cast terminal lugs, this premium quality hydraulic cable crimper will do an outstanding job..
  • 【EASY TO USE】: 4 steps to perfect....
Check Stock