Top High Pressure Nylon Tubing

mistcooling Outdoor Misting Fan System 18\ Fan - High Pressure (18\ - 2 Fans Black)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor use - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock

LASCO 19-5217 Compression Fitting with Stainless Steel Gripper Sleeve Nut and 3/8-Inch, Nylon

  • Nylon compression fitting with integral sleeve nut.
  • Use on copper, PEX, poly and aluminum tubing.
Check Stock

Orbit DripMaster 65199 Flag Dripper, 1-Gallon Per Hour, 10-Pack

  • SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
  • PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
  • DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
  • ECO FRIENDLY: Provide water directly where you need it without any overspray!.
  • EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.
Check Stock

Garden Sprinkler, Kadaon 360 Degree Rotating Lawn Sprinkler Large Area Coverage - Adjustable, Weighted Gardening Watering System

  • include : 100pcs ❤ Rich Accessories: 1* 98FT 1/4'' Tubing.
  • 2* 1/2‘’&3/4'’ Threaded Faucet Connector.
  • ❤ Three Irrigation Methods: ①Atomized irrigation, can be hung, and can be cooled.
  • ②Adjustable dripper, eight-hole water outlet, working pressure: 0.5-3Bar, wetting radius: 20cm.
  • ③Pressure compensation dripper, anti-inverted siphon, improve anti Blocking performance, constant flow during long-distance laying or pressure fluctuations, high irrigation uniformity, regular irrigation, 2 liters per hour..
  • include : 100pcs ❤ Save Water and Money: The irrigation system can automatically water after turning on the tap, which can save up to 70% of water compared to manual watering. The precision sprinkler system can slowly and accurately deliver the right amount of water to the root area where the plants need it..
  • ❤ Wide Range of Application: Irrigation kit simple installation, no need to excavate or excavate pipeline technol....
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock

SMC KB Series Polybutylene Terephthalate Piping Module Manifold, Branch Elbow, 8mm Tube OD, 2 Body Size

  • Applicable tubing material includes nylon, soft nylon and polyurethane.
  • -5 to 60 degree C Ambient and fluid temperature.
Check Stock

8 Pcs PTFE Tubing Cutter, RO Tubing Cutter 3/8 1/4 inch O.D. Plastic Hose Pipe Cutter for Water filters Reverse Osmosis System, Accurate Tubing Cutting Tool for Nylon PVC PU Plastic Tube

  • [ Durable Material ] The fuselage by durable, high impact of POM Plastic and 304 Stainless Steel blade, blade is replaceable, fixed by screw, you can according to their own need to replace the blade.
  • Stable structure, high hardness, sharp and long service life, can work in high temperature and high pressure environment, can be applied for a long time..
  • [ Smooth cutting ] The hardness of the cutting edge is pointed to ensure smooth cutting, which can improve the installation speed and reduce the risk of leakage caused by uneven cutting. Our cutter is designed to cut tubing efficiently, accurately and cleanly. Small and Portable, Sharp and Compact, easy and safe to use..
  • [ Widely Application ] Suitable for cutting ≤ 5/8 inch (16mm) OD Plastic Tubing or Other Pipe or Hose. Our tube cutter is Ideal for Cutting soft and hard PTFE tube, Nylon, Rubber, Vinyl, Poly, PVC, PU Plastic Air line, Pipe, Drip Tubing and Hose, even leather. It is perfect for the soft plastic tubing and needed more power for hard plastic tubing..
  • [ Purchase Guarantee ] Package contains 8 pcs Tube Cutter, meet your needs in quantity. If you are not satisfied with your purchase at any point and for any reason, please don't hesitate to contact us. We will respond quickly....
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon t....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock

3/4 inch Equal Tee Fitting,Tube Fitting for 3/4 Inch Tubing System, 2 Pack

  • Material: High quality brass material with Nickel plating against corrosion.
  • Working Pressure: 200 psi Maximum working pressure.
  • Sealing: Double O-ring ensure 100% sealing in high working pressure.
  • Installation: Easy installation and the tubing also can be removed if needed.
  • Application: Used with ID 3/4 Inch tubing system.
Check Stock

mistcooling Misting Fan Kit-18” Fan with 1500 PSI Misting System-Residential, Restaurant and Industrial Misting Pump – High Pressure (White Color) (6 Fans 18\ White)

  • Base Fan Mist Kit Includes: 1 - 18'' High velocity 3 Speed Fan with 4 Nozzle Stainless Steel Ring 1- 1500PSI High Pressure Pump with Solenoid, Pressure Switch and Filtration 1- 25ft Roll of Flexible HP Tubing 1/4'' 4- Ultrafine, Anti-drip Brass/Stainless Steel Misting Nozzles - Stainless Steel Mounting Clamps and All necessary fittings for easy DIY installation..
  • - 110v AC (Available in 12vdc and 220v on request).
  • - Supports up to 8 Fans FAN Features: - UL 507 certified for outdoor us e - High Velocity (Air throw up to 20 feet) - Corrosion resistant finish – 9ft pre-wired 3-prong plug for 120VAC - 6400 CFM, 1/10HP,.
  • 1.4 Amps - Quiet operation - Totally enclosed, maintenance free high-performance motor with thermal overload protection - Stainless Steel 4 Nozzle Mist Ring, all kits come with Black color tubing (we also offer White and Grey Color Tubing) contact us if you wish to get a different color tubing..
Check Stock