Top High Pressure Source

Raindrip PRYF 30 Pressure-Regulating Y Filter, X 3/4 in. MPT, Black

  • Lowers incoming water pressure from a water source and filters out particulates for optimal performance of your drip system.
  • Connects to pipe commonly used in underground valve systems.
  • Attach the pressure-regulating filter to pipe with a ¾ in. MPT connection point.
  • Use with a ¾ in. FPT Swivel Adapter to connect supply tubing.
  • Periodically flush out the system by removing the flush cap, also known as a cleanout cap, and running the water.
  • the filter can also be removed from the middle housing and pulled out to clean.
  • Regulates water pressure from water source.
  • preset at 30 PSI, ideal for most drip irrigation systems.
  • 200-mesh filter washer blocks particles in the water from clogging emitters.
  • filter is removable for cleaning and maintenance.
  • Filter can be flushed out by removing the flush cap or cleanout cap and running water through.
  • also can be removed from the middle housing to clean.
  • Comes with one ¾ in. MPT X ¾ in. MPT Pressure-Regulating. “Y” Filter.
Check Stock

Eastwood Dustless Liquid Media Blaster Brass Blast Gun Assembly 4 Mm Nozzle Installed Double Pick Boron Carbide Nozzle Up Tube Reinforced Clear Vinyl Suction Hose Quick Car Cleaning

  • With All The Dangerous Solvents, Strippers And Other Chemicals Available To Clean Your Car'S Parts, Sometimes All That'S Needed Is Water And Some High Pressure..
  • The Eastwood Liquid Media Blaster Is Specifically Designed To Use High Pressure Water From A Gas-Powered Pressure Washer As A Source For Powerful Dust-Free Abrasive Blasting To Tackle Tough Cleaning Jobs Without The Use Of Elbow Grease.
  • 23 in. [7M] X 1/2 in. [1.27Mm] I.D. Reinforced Clear Vinyl Suction Hose.
  • 3/8 in. Male Quick-Disconnect, High Pressure Water Fitting.
  • The Pressure Washer Must Be Capable Of Delivering A Minimum Of 3.5 Gpm For Adequate Performance. Less Water Volume Will Not Provide Sufficient Force To Allow The Blaster To Adequately Remove Rust And Or Paint..
Check Stock

TUXING 4500Psi 300Bar High Pressure Diving Compressor PCP Air Compressor Auto Stop for Scuba Breathing Snorkeling Water Sport Paintball 110V 60HZ Single-phase

  • 【Power Supply】110V single phase, Frequency: 60Hz, Power: 2.2kw / 3hp, Current: 10Amp （Instantaneous starting current: 15A）, Flow Rate: 100L/min / 3.5cfm..
  • 【 Portable Air Compressors】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
  • 【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
  • 【110V Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter, frame, isolator etc, the Lubricate Oil we recommend that ISO grade 100/150..
  • 【Application】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
Check Stock

TDRRICH 3/4HP water pressure booster pump with Smart Controller for whole house，Self-priming Jet Transfer Pump Pressure Switch Automatic System 110v AC for Lawn Garden Sprinkler Irrigation

  • 【High Pressure & Mass Flow】 TDRRICH lawn sprinkler pump 3/4hp 550W booster pump has a max head of 131ft and 18 GPM ( 1056 GPH ) max flow, boosting water pressure to 4 bar at max (working at rated output water pressure of 2 bar)..
  • 【Continuous & Automatic Control】Water pressure booster pump for household can 24H continuous stable working. Self-priming when water runs. Automatically controlled by electric controller. Boosting the water pressure to the setting figure (set by pressure switch )..
  • 【WIDE APPLICATION】Garden hose pressure booster provides high efficiency of pressure boosting, most suitable for house, garden, residential water system, Cottage,Villa, farm, shallow well & solar system water supply..
  • 【EASY INSTALLATION】TDRRICH shallow well jet pump and self priming irrigation pump can be simply connect to the domestic inlet pipe, pressure tank, water system, home sprinkler system, shallow well and so on by plug in to the 110V 120V AC power source..
  • 【Presale & After-sale Services】As a professional manufacturer in home water pump field, TDRRICH ....
Check Stock

Red Lion 602207 Premium Cast Iron Shallow Well Jet Pump, 9\H

  • SHALLOW WELL JET PUMP: Red Lion Premium Cast Iron Shallow Well Jet Pump features a 1-1/4” FNPT suction intake and 1” FNPT outlet discharge.
  • 3/4 HP pump can draw up to 16 gallons per minute.
  • BUILT TO LAST: Rugged cast iron casing and volute for long life and high-efficiency.
  • glass-filled thermoplastic impeller and diffuser for durability.
  • HEAVY DUTY MOTOR: runs on either 115 or 230 volts.
  • voltage must be selected to match incoming power source.
  • Includes a capacitor for increased starting power.
  • INCLUDES: a factory pre-set 30/50 pressure switch that produces a working maximum pressure of 50 PSI and pressure gauge.
  • SPECIFICATIONS: 3/4 HP, 14.4 Amps at 115 Volts.
Check Stock

Briggs & Stratton 3100 MAX PSI at 2.1 GPM Gas Pressure Washer with 30-Foot Hose 7-IN-1 Nozzle and PowerFlow + Technology

  • Features PowerFlow-plus Technology Dual Mode Cleaning – use the High Pressure or High Flow mode depending on the job at hand.
  • High pressure 3100 MAX PSI at 2. 1 GPM / High flow 4. 5 MAX GPM at 150 PSI.
  • Powered by a trusted Briggs & Stratton EXi875 Series engine.
  • Just Check & Add technology - means you’ll never change the oil for the life of the engine.
Check Stock

Vacuum Block Intake, 6 Port Vacuum Block Intake Manifold Kit Fuel Wastegate Turbo Boost 1/8NPT for Racing

  • 6 Port Block Intake: Ideal for connecting pressurized controllers, meters and any component that requires a separate vacuum source. You can also use tape to meet fuel and oil requirements..
  • High Quality: The new universal supercharger/vacuum manifold uses high-quality CNC machine tools to process T6061 billet aluminum, which is rust-proof and durable..
  • An additional vacuum source is required: the billet vacuum manifold is a good additional tuner, and the design of the supercharger car and the single throttle body requires multiple vacuum sources..
  • Great Aftermarket Replacement: Includes 6X 1 / 8NPT aluminum accessory ports for boost controllers, map sensors, fuel pressure regulators, boosters, blow valves and any other fuel/ignition management components that require a vacuum source..
  • Quality Assurance: 12 months worry-free warranty.We are a professional seller. Please feel free to contact us if you meet any trouble in using our product..
Check Stock

Champion Power Equipment 3200-PSI 2.5 GPM Low Profile Gas Pressure Washer

  • POWERFUL: 3200 PSI with 2.5 GPM backed by Champion’s 224cc single-cylinder OHV engine.
  • VERSATILE: Quick-connect gun, wand and five nozzles (0˚, 15˚, 25˚, 40˚, soap), a 25-foot high-pressure, quick-connect hose plus a detergent tank and hose for handling a variety of jobs.
  • HASSLE-FREE: Ergonomic comfort grip trigger gun reduces fatigue, plus onboard storage for the high pressure, hose, trigger gun and spray wand.
  • QUALITY: High-performance Annovi Reverberi axial cam pump provides consistent cleaning for everyday jobs.
  • CHAMPION SUPPORT: Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts.
Check Stock

Cool-Off Mid Pressure Misting System Kit (Stainless Steel), Includes Mid Pressure Water Pump with 20 Nozzles and Nylon tubing, Connects to Any Outdoor Fan, Cooling Mister System for Lawn Patio Garden

  • CUSTOM MIST SYSTEM KIT - The ultimate way to design a custom cool mist system that fits your lifestyle, this DIY Mid Pressure misting cooling system kit allows the end user to incorporate additional misting fans, which appeals to many homeowners trying to combine a water mist system along the perimeter while placing stylish misting fans in the corners..
  • ULTRA FINE MIST - The Cool-Off mid-pressure mist cooling system has been carefully designed to enhance any outdoor patio, backyard, sports field or arena. A supreme combination of quality, price, and performance, our patio misting system kit creates an ultrafine mist that will instantly cool your outdoor living space..
  • PREMIUM MISTING PUMP - Each misting system kit comes with the misting industry’s newest and exciting booster pump, capable of powering up to 26 .012" water misting nozzles. In doing so, we've created the ideal outdoor cooling solution for customers seeking high performance at an affordable price..
  • WHISPER QUIET ENGINE - Since many people choose to use the water source closest to their patio, our engineers designed the engine to be small, powerful and most importantly, whisper quiet. Each mist cooling system kit incorporates upscale features including an inlet solenoid valve & low pressur....
Check Stock

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

LOYALHEARTDY 8L Stainless Steel Foam Maker Milk Foam Machine Milk Frother Commercial Milk Frother and Steamer with Functions of Water Opening Machine, Milk Bubble Machine, Steam Engine

  • 【PRODUCT PARAMETER】: Voltage: 110v. Capacity: 8l. Power: 2500w. Led liquid crystal display temperature..
  • 【MULTIPLE FUNCTIONS】: This is a magic machine with the functions of water opening machine, milk bubble machine, steam engine and so on..
  • 【HIGH QUALITY DESIGN】: Multi angle steam pipe. Professional pressure relief nozzle. Splash type hydronephrosis. High-pressure double boiler technology, separate boilers for water boiler and steam, so that the boiling water and steam can be continuously supplied..
  • 【HIGH TEMPERATURE RESISTANCE】: High temperature resistant and exclusive internal gallbladder. Waterproof and high temperature control circuit board..
  • 【WIDELY APPLICABLE】: Steam boiling water frothing machine comes with an induction suction booster pump, which can be used for bottled water and any water source areas without tap water or low water pressure..
Check Stock

RUN-RITE Targeted Maintenance Kit - Fuel System Cleaner for Gasoline Direct Injection Engine - Valves, Piston Ring & Fuel Injector Cleaner - Car Cleaning Kit for Carbon & Fuel System Deposits - 3 pcs

  • Kindly Notice: To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
  • NOTE:Clean liquid not include,work on gasoline injector only, not for diesel injector.
  • The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks (petrol and diesel). Non-Dismantle injector Throttle and fuel system..
  • Throttle model: The way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: 1.Generally speaking, inlet hose is bigger, return hose is samaller.
  • 2.There is always a filter connected in the inlet hose side, and a buffer in the return side.
  • 3.There is arrow on the hose to show the fuel flow direction.
Check Stock