Top High Pressure Thread Fitting

M MINGLE Pressure Washer Swivel, 3/8 Inch NPT Male Thread Fitting, Stainless Steel, 4500 PSI

  • Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting. Eliminates hose twist and no kink..
  • 360 degree rotation. Reduces stress on the gun, hose and operator..
  • Max Working Temperature: up to 120℃, 250°F degree, suitable for hot and cold water. Made of high quality stainless steel. Max Working Pressure: 4500 PSI. Max Flow Rate: 30.0 GPM..
  • Connect 3/8’’ NPT male swivel to gun and connect to 3/8’’ female thread fitting to hose..
  • The universal swivel joint also can connect hose to hose..
Check Stock

M MINGLE Pressure Washer Adapter Set, Quick Connect Gun to Wand, M22 14mm to 1/4 Inch

  • APPLICATION: SEE IMAGE 2. CONVERT M22 to 1/4'' FITTING. Quick connect gun to wand or nozzle. Connect M22 male thread to pressure washer gun and connect M22 female to wand..
  • ATTENTION: M22 14 fitting has 14mm inside diameter, ■NOT 15 mm■. Please see image 3 and measure the inside diameter of your application..
  • Universal Quick Connect Kit, Metric M22 14mm male thread + 1/4’’ quick disconnect socket, 1/4’’ plug + M22 14mm female..
  • High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

STYDDI 4000 PSI 1/4'(Hose Size) 50 FT Kink Resistant Pressure Washer Hose with M22-14mm Brass Thread and M22 14mm Extension Coupler for All M22-14 Thread Power Washers, Rate Burst 12000 PSI

  • UNIVERSAL REPLACeMENT HOSE FOR MOST BRAND PRESSURE WANSHERS - 50 foot pressure washer replacement hose(M22-14mm) is designed for gas power washer equipment, also be available for electric pressure washers. It is compatible with all major brands of high pressure washer including: Karcher, B&S, Generac, Dewalt, Ryobi, Powerstrok, Craftsman, Champion, Simpson, Greenworks, Honda..
  • DUAL-BRAIDED INNER CONSTRUCTION MAKES IT MORE DURABLE AND WEARABLE (Burst Pressure Up to 12000 psi) – The pressure washer extension hose consists of four layers of tubes: inner tube, made of water and chemical resistant rubberized thermoplastic.
  • strong tensile steel braided reinforced layer.
  • high tensile cotton braided reinforced layer.
  • wear resistant cover tube. No shake, no leak, and no damaged easily..
  • 100% BRASS THREAD FITTING & LIGHT-WEIGHT THAN RUBBER HOSE - This power washer extension hose is 50 foot long with M22-14mm(not M22-15mm) brass fittings (twist connect). Working pressure up 4400 PSI with weight only 4.52lb, of which is almost half weight than rubber hose, meets your high pressure needs and assist you in doing cleaning work more easily and faster..
  • UNIVERSAL M22-M22 (M22-14mm, not M22-15mm) HOSE-TO-HOSE ADAPTER - Professional M22 metric male thread fitting w....
Check Stock

M MINGLE Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Male Fitting, 4500 PSI

  • Convert metric M22 15mm male thread to M22 14mm male fitting. M22 15mm is not standard screw fitting and fit electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz..
  • Universal pressure washer coupler connects power washer gun to hose. Fits many brands of pressure washer gun and hose with M22 15mm fitting..
  • Made of high quality brass, resistance to corrosion..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Tool Daily High Pressure Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose, 4500 PSI

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
Check Stock

DUSICHIN DUS-118 Foam Cannon Lance Pressure Washer Nozzle Tip Snow Soap Spray Gun Jet Wash Larger Container 67Oz Higher Flow Rate

  • 3000 PSI high pressure water gun body, brass fitting, a pressure washer is needed to make it work.
  • Adjustable snow foam lance for car cleaning large container 100 Oz, higher flow rate.
  • M22 Metric Male thread fitting, 14mm internal diameter.
Check Stock

M MINGLE Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Female Fitting, 4500 PSI

  • ATTENTION: Convert metric M22 15mm male thread to M22 14mm female fitting. M22 15mm fitting fits electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz..
  • Universal pressure washer coupler connects power washer gun to hose. Fits many brands of pressure washer gun and hose with M22 15mm fitting..
  • If leakage, please put teflon tape on the male threads of your gun or other products..
  • Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
  • AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Breezliy 2pcs Garden Hose Pressure Regulator 25 PSI, 3/4" FHT × 3/4“ MHT, Pressure Reducer, Great for Drip Irrigation System Distributing Regulator drip Irrigation Parts emitters for drip line

  • 25 PSI preset pressure regulators (hose thread) are used to reduce and regulate the incoming pressure of a household’s water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI，Pressure Compensation Range: 30-100 PSI..
  • High-strength ABS construction for durability, available with 3/4” female hose thread to fit all standard hose or pipe thread connections.
  • Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). It may be connected to an automated timer, backflow preventer, or filter, if desired..
  • This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA..
  • Suitable for retro-fitting sprinkler zones, faucet, hose, or gravity feed - For installation above grade, in a Bubbler Box or in a green house.
Check Stock

Tool Daily High Pressure Washer Hose 50 FT X 1/4 Inch, 3000 PSI, M22 14mm or M22 15mm, Replacement Power Washer Hose for Most Brands

  • Replacement pressure washer hose for Ryobi, Karcher, Honda, Troy Bilt, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Sun Joe, Dewalt and more. Fit most electric or gas pressure washer..
  • High pressure hose has M22 female thread. Compatible M22 14mm and M22 15mm fitting. The adpter attached can change female M22 fitting to male M22 fitting..
  • Pressure washer extension hose is non-kink, durable, weather and abrasion resistant..
  • Pressure washer hoses is 50 FT X 1/4 Inch. The working pressure is up to 3000 PSI. Max. Temperature: 140℉ / 60℃..
  • Application: Used for residential and light commercial washing, such as washing Car, Floors, Motorcycle, Windows, Siding, Driveways, Roofs and so on..
Check Stock

VEVOR Airless Paint Spray Hose Kit, 50ft 3600psi High-Pressure Fiber Tube with 8" Extension Rod Pole, Including 517 Tip and Tip Guard, 1/4" Swivel Joint for Homes Buildings Decks or Fences

  • ...ports most mainstream airless sprayer brands, widely applied in home decoration, painting, and industrial fine paint decoration. The package includes a 50 ft airless paint hose, an airless spray device, a tip guide with a 517 tip, and an 8 in extension pole..
  • 3600 PSI High-Pressure Spray Device: This sturdy and durable spray device is not easy to rust. With built-in hose swivels and a full 4-finger trigger, this forged aluminum head brings you an excellent atomizing effect, greatly reducing fatigue while spraying. Maximum Operating Pressure: 3600 psi / 248 bar.
  • 517 Sprayer Tip with Nozzle Seal: The 517 airless spray tip is composed of high-quality steel and iron. A practical tip guard is also enclosed for more effective work. Maximum Operating Pressure: 5000 psi / 34.5 MPa.
  • 50 ft x 1/4 in Universal Hose: Made of high-quality fiber and nylon cover, this 50 ft / 15.24 m pipe can withstand aging, high pressure, and corrosion. 1/4 in female swivel-nut connection....
Check Stock

VEVOR Airless Paint Spray Hose Kit, 50ft 3600psi High-Pressure Fiber Tube with 8in Extension Rod Pole, Including 517 Tip and Tip Guard, 1/4in Swivel Joint for Homes Buildings Decks or Fences

  • ...ports most mainstream airless sprayer brands, widely applied in home decoration, painting, and industrial fine paint decoration. The package includes a 50 ft airless paint hose, an airless spray device, a tip guide with a 517 tip, and an 8 in extension pole..
  • 3600 PSI High-Pressure Spray Device: This sturdy and durable spray device is not easy to rust. With built-in hose swivels and a full 4-finger trigger, this forged aluminum head brings you an excellent atomizing effect, greatly reducing fatigue while spraying. Maximum Operating Pressure: 3600 psi / 248 bar.
  • 517 Sprayer Tip with Nozzle Seal: The 517 airless spray tip is composed of high-quality steel and iron. A practical tip guard is also enclosed for more effective work. Maximum Operating Pressure: 5000 psi / 34.5 MPa.
  • 50 ft x 1/4 in Universal Hose: Made of high-quality fiber and nylon cover, this 50 ft / 15.24 m pipe can withstand aging, high pressure, and corrosion. 1/4 in female swivel-nut connection....
Check Stock

Tool Daily High Pressure Washer Hose 50 FT X 1/4 Inch, 3000 PSI, M22 14mm or M22 15mm, Replacement Power Washer Hose for Most Brands (Renewed)

  • Replacement pressure washer hose for Ryobi, Karcher, Honda, Troy Bilt, Simpson, Generac, Flexzilla, Craftsman, Green Work, Briggs and Stratton, Sun Joe, Dewalt and more. Fit most electric or gas pressure washer..
  • High pressure hose has M22 female thread. Compatible M22 14mm and M22 15mm fitting. The adpter attached can change female M22 fitting to male M22 fitting..
  • Pressure washer extension hose is non-kink, durable, weather and abrasion resistant..
  • Pressure washer hoses is 50 FT X 1/4 Inch. The working pressure is up to 3000 PSI. Max. Temperature: 140℉ / 60℃..
  • Application: Used for residential and light commercial washing, such as washing Car, Floors, Motorcycle, Windows, Siding, Driveways, Roofs and so on..
Check Stock