Top High Speed Cnc Motor

RATTMMOTOR 100mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for CNC Router Engraving Milling Spindle Motor

  • Compared with the aluminium profile fixture,the accuracy is much higher, and it is hard to deform..
  • Fit for : CNC 100mm diameter high-speed spindle motor..
  • Cast aluminium fixture is much heavier than aluminium profile fixture..
Check Stock

CNC Router Machine 2.2KW 4 Axis 6090 USB CNC Router Kit 3D Engraving Machine + VFD Water-Cooling Spindle Motor +Control Box + Handwheel, Ball Screw, with Limit Switch, US STOCK

  • ✅ [Powerful Performance] Spindle Speed: 24000RPM. Spindle motor: 2200Whigh-speed variable frequency spindle motor, ER20 chuck, matching 6mm collet. Working Speed :50-1500mm/min. Drive of Stepping motor: 0-3.5A adjustable four-axis drive. Variable-frequency Drive(VFD): AC110V, 0-400Hz(built-in Control box ) (Tips: The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V).).
  • ✅ [ROUTER 6090 Parameters] Model: CNC6090GZ. X,Y,Z Working Area: 900(Y) x 600(X) x 140mm(Z). Outside dimension: 1150x970x650mm(LxWxH). Working platform size: 1045x720mm(LxW). Frame Material：The whole machine used 6061 aluminum profiles. Max. Feeding height: ≤140mm(From base of Z axis to platform). X/Y/Z axis--- Ball Screws. Stepping motor: 57 Two-phase 3A 150N.cm..
  • ✅ [High Quality and Durable] Water Cooled Spindle Motor Can Work Longer Time Than Air Cooled Motor. Has Higher Stability And Better Concentricity Than Air Cooled Motor. High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. (Note: Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.).
Check Stock

Electric Skateboard with Remote Control 350W Motor 12MPH Top Speed 10 KM Range 8 Layers Maple Longboard

  • 【GOOD RANGE AND HIGH SPEED】It has three modes and speeds for different needs' skaters. It also comes with reverse capability.Go up to max 10 Km by....
  • 【EASY TO CONTROL AND RIDE】Come with 2.4G wireless remote controller with 4 led indicators, keep you informed the skateboard battery level,....
  • 【STURDY MATERIAL】8-ply rock hard maple deck with hadle design, it has better elasticity and toughness, board without splicing, using CNC trimming....
  • 【350W BRUSHLESS HUB MOTOR】Compared with the belt drive motor, the brushless hub-motor is more reliable and less problems. Even without motor,your....
  • 【NOTICE】The lithium battery is easy enter the self-protection state and it can't be charged if the lithium battery is not charged and discharged....
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

DBXMFZW 2.4G LCD Screen Remote Control Simulation UH60 Helicopter, Single Prop Aileronless RC Drone Aircraft with Gyroscope 2 Battery 6CH Dual Brushless Motor 3D&6G Simulation Fighter Model,

  • ... ☀Using 4006 630KV brushless motor for self-stable co-drive, reducing gear agitation, with low noise, large torque, sufficient power, and high efficiency. The lock tail motor uses a special 1104 4200KV brushless motor, which has the characteristics of high temperature resistance, fast response speed, stable lock tail, and not easy to be damaged after long-term work..
  • ☀Using enlarged 4.3g metal digital steering gear, high torque, fast response, high precision, and accurate return to center, the response speed is 60°/0.05ms, which makes the aircraft fly accurately, feel good, and last longer..
Check Stock

RATTMMOTOR CNC 1610 PRO CNC Wood Router Machine Kit, 3 Axis GRBL Control DIY Mini CNC Milling Engraver Engraving Machine with CNC Offline Controller for Plastic/Wood/Acrylic/PVC/PCB/Wood

  • ... 【GRBL Control Board/Software】This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear..
  • 【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified..
Check Stock

YOUQUKEJI 2430 7200KV 4P Sensorless Brushless Motor with 25A Brushless ESC Electric Speed Controller for 1/18 1/16 RC Car Truck

  • 2430 Motor material: 4-pole 12-slot high-torque, 3.5mm gold-plated connector 2.0mm shaft, CNC machined blanks, 6061-T6 aluminum heat sink, secondary oxidation treatment, high-end and exquisite appearance.
  • 25A ESC parameters: motor plug: 3.5mm female bullet connector.
  • Features: High-purity copper windings can maximize efficiency, high-speed ABEC5 oversized bearings. Precisely balanced rotors and smoothness can achieve the best reliability and maximum RPM. Removable/replaceable rotor.
  • Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heatprotection / Throttle signal loss protection / Motor blocked protection/.
  • Widely compatible: universally applicable to 1/18 1/16 brushless cars-multi-installation system for M2.5 screws..
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 8.5Nm(1203.94oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 8.5Nm(1203.94oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

STEPPERONLINE Nema 34 Stepper Motor 4.8Nm(679.87oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable

  • NEMA 34 bipolar 2 phase stepper motor wihr 4-lead.
  • Holding Torque: 4.8Nm(679.87oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC.
  • Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices.
Check Stock

35.4\ Electric Skateboard for Adults with Remote Control 12 MPH Top Speed 350W Motor 8 Layers Maple Electric Longboard Max Load 220 Lbs E-Skateboard (Black)

  • ...e deck with hadle design, it has better elasticity and toughness, board without splicing, using CNC trimming and grinding process, kick tail and concave for added control,allows riders to have more traction while.It is also lightweight and easy to transport.It can can hold a maximum load of 220 lbs..
  • GREAT RANGE AND SPEED ---- Our electric skateboard has three modes and speeds for beginners or advanced skaters.It also comes with reverse capability. You can reach a max speed of up to 20KM/H.High capacity battery with a maximum travel range of up to 10 miles under normal conditions with a 2 hours charge and can climb an angle of max 15 degrees..
  • 350W BRUSHLESS HUB-MOTOR ---- Compared with the belt drive motor, the brushless hub-motor is more reliable and less problems. Even without motor,your electric skateboard can also be used like a regular board, making it easier to use no matter where..
  • ERGONOMIC WIRELESS REMOTE ---- The skateboard comes with a wireless remote control for convenient longer distance traveling.With LED indicator, you can know the battery level of the skateboard at any time.An ergonomic wrist strap for the electric skateboard remote controller helps to prevent dropping.The remote range can max reach up to 47.2inch.You can easi....
Check Stock

RC Motor Cooling Fan 10000RPM Brushless RC Motor Heatsink 8.5V ESC Cooling Fan Heat Dissipation for 1/5th Scale RC Car 50mm Blushless Motor Orange

  • 【Wide Applications】RC Brushless Motor Cooling Fan is designed for RC model car 1/5scale,50mm brushless motor.It is a good choice for RC fans..
  • 【Protect Motor 】The speed can reach up to 10000 RPM, excellent heat dissipation effect to protect the motor..
  • 【Premium Material】The motor cooling fan is made of high quality material aluminum, CNC machined for precision, Anodized, for lightweight and durable performance ,workmanship exquisite..
  • 【Easy to Install】For JST connector is convenient, easy to install and use, and the wiring has positive and negative poles, and the wrong connection will not work..
  • 【100% New】Genuine Surpass Hobby RC Products,Exquisite workmanship & Durable.Buy with Confidence,Friendly Customer Service..
Check Stock

Traxxas 3678A Wheelie Bar, Green

  • Aluminum Slash Wheelie Bar Kit for 1/10 Traxxas Slash 2WD, Rustler, Bandit trucks..
  • This CNC Machined aluminum wheelie bar kit is 7" in length and allows a variety of tuning options with an adjustable angle, double or single wheel setup options, and limits flex with solid aluminum ladder frame construction..
  • Rubber tires ​to allow smooth rotation and low drag..
  • CNC Aluminum alloy construction offers an extra level of protection for the motor and transmission case.
  • Aluminum Adjustable Wheelie Bar Kit was developed for No Prep RC Drag Racing.This part Is for On Road Speed Run and is NOT recommended for off-road use..
Check Stock