Top High Supply Voltage

DC Power Supply Variable, Bench Power Supply with Output Switch, Short Circuit Alarm, Adjustable Switching Regulated Power Supply 30V 10A with 4-Digits LED Power Display, USB Quick-Charge Interface

  • 【Highly Accurate Encoder Adjustment】 Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs..
  • 【Output Switch Control】 In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency..
  • 【Automatic Power Calculation】 The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment..
  • 【Short Circuit Alarm】 When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage pr....
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Juried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with Memories, Output Switch, Adjustable Switching Regulated Power Supply with 4-Digits Display, Encoder Adjustment Knob

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, Therma....
Check Stock

Comparator Dual177;18V/36V 8-Pin SO N T/R

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

TOAUTO DC Power Supply Variable 30V 10A，Adjustable Switching Regulated Lab Power Supply with 4 Digits Large Display,Course and Fine Adjustments (0.01V-0.001A)，Temperature Controlled Fan and Low Noise

  • 【High Precision, Wide Range】The DC power supply is a professional power regulation device that designed with crystal clear, backlit 4-digit LED display of voltage, current, and power. Precise accuracy: 00.01V and 0.001A. You can easily tune it within 0-30V and 0-10A.
  • 【Multifunction 】The easy-to-use rotary knob of coarse and fine could adjust the data of voltage and current digit by digit, which allows you to set the desired output resolution quickly and easily in 30V 10A. The precision 10A dc power supply also comes with high-quality pure copper toroidal transformer, intelligent temperature-controlled fan, unique solar heat dissipation function and 4-in-1 power supply, including universal, digital control, programmable, and timing output power supply.
  • 【High-Quality & Multiple Protections】The dc regulated power supply comes with over-voltage, over-current, over-power, over-heat, short-circuit, five powerful protection function. The built-in fan low noise & low ripple,prolonging the life of product effectively. In addtion, the power supply variable displays voltage, current and power simultaneously and the keyboard can be locked to avoid misoperation.
  • 【Excellent Heat Dissipation】The lab bench power supply is equipped with a big fan control....
Check Stock

Furrion AC/DC Distribution Panel - Wall Mount with AC & DC Power Distribution for Both 30 Amp and 50 Amp Power Converters - FDP12WA-BL

  • 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check Stock

Texas Instruments LM311P LM311 Differential Comparator With Strobes DIP8 5 Pack

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
Check Stock

Kungber DC Power Supply Variable, 30V 5A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
Check Stock

Texas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

DC Power Supply Variable, Vlifree 30V 10A Adjustable Switching DC Bench Power Supply with 4-Digits LED Display, Data Hold, Coarse and Fine Adjustments(00.01V, 0.001A) with 110V/45.3in Alligator Leads

  • High Precision & Versatility - The Vlifree DC bench power supply has a resolution of 0.01V and 0.01A, and you can easily adjust it in the range of 0-30V and 0-10A.
  • The 4-digit back-lit LED display provides more accurate and clearly visible readings for the voltage and current value, even in conditions of low voltage.
  • Constant Voltage (C.V.) & Current (C.C.) Mode - Adjust the coarse and fine adjustment knobs to easily dial in the required voltage and current.
  • When the load current reaches the current limit value, it will automatically switch to the constant current mode, you can easily see the amperage and voltage change as circuit components are switched in and out.
  • Multiple Protections - Come with Output button, this button can prevent you from damaging the device by forgetting to disconnect the output.
  • the Vlifree power supply consists of a temperature-controlled fan, over-voltage, power overload, short-circuit protection, and a 5A input fuse, you can use it for a long time without interruption.
  • Wide Application- The lab power supply made of high-quality materials is compact, lightweight and easy to carry.
  • Vlifree DC power supply is ideal for various applications, such as school lab experiments, cell phone repairing and troubleshooting, electronic pro....
Check Stock