Top High Temp Fastener

Rexka Rear Trunk Liner Push-Type Retainer for Mazda B467-68-AC3-02 CX-7 CX-9 Mazda 5 (Pack of 30)

  • Other Names:Console Assembly Screw, Door Trim Panel Fastener, Side Cover Fastener, Lower Trim Panel Fastener, Pkg Tray Trim Clip, Rear Panel Trim Fastener, Rear Pillar Trim Fastener, Side Panel Fastener, Side Trim Fastener, Trunk Side Trim Fastener, Upper Molding Fastener, Cowl Trim Fastener, Trunk Lid Trim Fastener, Quarter Pillar Trim Fastener, Rear Pillar Trim Clip, Trim Panel Assembly Fastener, Under Cover Fastener, Lower Center Pillar Trim Fastener, Trim Panel Assembly Clip, Fastener.
  • Head Diameter: 18mm Stem Length: 14mm Fits Into 6mm Hole.
  • Replaces Mazda: B46768AC302 Mazda 5, CX-7, CX-9, Miata, Millenia, MX-6, RX-7 & Protégé 1993 -.
  • Positions:Left Front, Left Lower, Left Rear, Left Upper, Right Front, Right Lower, Right Rear, Right Upper.
Check Stock

Maverick M Remote Smoker Thermometer [ET-73] - Gray

  • 500FT remote monitoring: Unlike with bluetooth meat thermometer limited range of only 100ft.
  • ThermoPro wireless thermometer for cooking provides best in class, reliable connection of up to 500ft to ensure you can monitor from anywhere.
  • Smart alerts & timer: Always stay informed with our smoker thermometer allows you to view temp and timer simultaneously.
  • Once the food temperature reaches your preset temp, bbq thermometer will beep and flash.
  • Accurate dual meat temperature probes: Digital food thermometer features high heat resistant meat probes, measuring temp range from 14℉ to 572℉ with an accuracy 1.8°F/1°C to let you Cook Like a Pro.
  • 8 temp presets and BBQ mode: Kitchen thermometer for food features a HI/LOW temp setting to monitor the ambient temp of your oven/smoker/grill and know exactly when to add more fuel.
  • Large backlit display & simple interface: Large display coupled with a simplistic interface, allows you to operate the device with ease.
  • Probe thermometer for smoker features a unique anti-slip grip to reduce the chance of accidents.
Check Stock

BTMETER Infrared Thermometer Gun, Dual Laser 30:1 Industrial Temperature Meter Measure High Temp -58 to 2732 Degree Fahrenheit for HVAC Grill Kitchen Pizza Oven BT-1500APP 【Not for Human】

  • ✅【High Accuracy】Thanks to the adjustable emissivity 0.1~1.0 and industrial temp sensor design, BT-1500APP temperature thermonitor gun could measure all kinds of surface temp -58°F~2732°F(-50°C ~ 1500°C) with high accuracy ±2% of reading. Reliable surface temp tester in HVAC kitchen food cooking baking and laboratory scientific research etc..
  • ✅【Handheld IR Pyrometer】Compare with normal commercial laser thermometer gun, BT-1500APP digital temperature tester supports mobile phone connect, real-time monitor and control thermometro 80m away, as well as transmit & share temp measurement data in txt format. 【Industrial Temp Pistol Not for Human or Animals】.
  • ✅【Larger Distance Spot Ratio】30:1 large D:S and smart double laser designs, help you to shoot and locate measuring range clearly though from further distance. A portable temperature measurement device protect you from heat dangerous when you're doing grilling metal blacksmith work or finding hot cold spot on wall or window around the house..
  • ✅【Multi Measurement Modes】 Supports Max / Min / AVG measure modes and hi temp low temperatura alarms. Comes with standard 1/4" metal screw hole design, so you could fix it on most tripod and check temperature smartly. Just connect it wit....
Check Stock

Diamond Audio MP694 6 X 9 PRO Full-Range Co-Ax Horn Speaker

  • Ferrite Strontium High Temp Magnet structure.
  • 1.5” 4 Ohm – Single Layer High Temp Voice Coil with Black Coated Voice Coil former for Woofer.
  • 1.0” 8 Ohm – Single Layer High Temp Voice Coil for Tweeter.
  • Advanced Voice Coil Heat Sink Design for Better Heat Dissipation.
Check Stock

GEARWRENCH 12 Pt. Ratcheting Combination Wrench, 19mm - 9119

  • Leading manufacturer of high-quality tools.
  • Made to withstand even the most demanding jobs.
  • International Renown for our diverse range of products.
  • All our products have been designed with the requirements of the professional in mind.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

Ad Tech Multi Temp Mini Glue Sticks-4x.28' 10/Pkg.

  • Bonds wood glass metal floral fabric and foam in 20 seconds. Non-yellowing. Works in both low- and high-temp guns. Use in low-temp guns for fabric foam floral and other delicate materials. Use in high-temp guns for non-porous materials such as wood glass and metals..
Check Stock

AQQA Fish Tank Heater 200W Submersible Aquarium Heater 30-40 Gallon Aquarium Betta Heater with Suction Cups Thermostat Heaters for Marine Aquarium & Freshwater （200W）

  • 【2MM Thick Explosion-proof Quartz Tube】The shell of AQQA fish tank heater is made of 2MM thick high quality quartz, features insulated, explosion-proof and stable.Double sealing and waterproof, preventing leakage of water and electricity.Much safer for human and your lovely fishes..
  • 【Intelligent Temp Control Range 61-90 ℉】AQQA aquarium heater adopts nickel-chromium heating wire and sensitive silver contacts, features fast heating, high precision of temp control. The heater will power off automatically when reaching the set temp and will start heating again when the water temp is 1℉ lower than the set temp..
  • 【Easy Installation and Temp Setting】We recommend vertical installation by 2 powerful suction cups or slight tilt, make sure it is fully submerged into water before plug in. Horizontal installation may cause slight deviation of the sensing temperature due to the upward flow of hot water. Rotating the knob to set the target temp. The indicator light will turn red when heating. It is applied for freshwater and marine aquariums, aquaculture, and hydroponic systems etc..
  • 【Speciafication for 200W Submersible ....
Check Stock

Ad-Tech 2201110 Multi Temp Glue Stick, 7/16-Inch x 10-Inch, 10/Pack

  • Hot glues bond better to craft materials than most liquid glues.
  • Multi-temp glue sticks are designed to provide a variable flow from low to high temperature.
  • Works in either high temp or low temp settings.
Check Stock

Big Green Egg Replacement Felt Gasket - X-Large

  • UPGRADE YOUR GRILL: More durable than the OEM polyester or wool gasket.
  • Extra-heavy ¼ -inch felt outlasts original 3 to 1.
  • FOR ALL VISION MODELS: Compatible with all Signature, Professional and Classic Series kamado-style Big Green Egg (BGE) grills.
  • HIGH-TEMP APPLICATIONS: Designed for better temperature control in high-heat BBQs.
  • Made specifically for high-temp cooking like pizza or searing.
  • FULL COVERAGE: Includes 12 feet 8 inches (Large) of Nomex, high-temp adhesive.
  • Enough felt to cover the top, bottom and chimney of any Big Green Egg (BGE) grill.
  • EASY INSTALLATION: Self-stick adhesive for quick replacement of the OEM gasket.
Check Stock

REPL GASKET FOR XXL, XL, L EGG

  • ♨️ HIGH TEMP - All New Complete Kit for Big Green Egg, Med, Large, XL, XXL.
  • ♨️ EASY INSTALLATION - Grey Color Self Adhesive (pressure sensative high temp adhesive, close lid to cure).
  • ♨️ UNMATCHED PERFORMANCE - Performance Gasket Kit with a proprietary blend of materials and the highest temp self adhesive available.
  • ♨️ SHIPS QUICK - Trusted Seller (ONE 15 foot long roll makes 3 peice kit as shown for both lids, and top vent).
  • ♨️ 100% MADE in USA - Trusted by Major Manufacturers. Our best gasket for Big Green Egg Model # GL.
Check Stock

Industrial Laser Thermometer Gun, BTMETER 50:1 Infrared Temperature Meter w/Adjustable Emissivity Measure High Temp -58°F to 3416°F for HVAC Furnace Pizza Oven, IR Pyrometer BT-1880

  • ✅【High Accuracy】Designed with upgraded temp sensor, BT-1880 non-contact digital laser temperature monitor could test surface temperatura from -58 to 3416 fahrenheit degree with high accuracy ±2~3% of temp reading,get temperature measurement done within 0.25second,display temp reading in 0.1°F resolution..
  • ✅【Adjustable Emissivity】Different objects have different ability to emit infrared. BT-1880 thermometer gun is designed with 0.1~1.0 emissivity especially, so as to adapt all kinds surface temperature measurement as well as ensure its high accuracy measuring. Widely used in household kitchen food grilling cooking baking, industrial HVAC car automotive electrical appliances maintenance and scientific laboratory etc..
  • ✅【50:1 D:S】Larger distance to spot(D:S) ratio 50:1 and double laser pointer design, not only offer more option on measuring distance, but also help you to locate the measurement area clearly though shoot farther. Just point and pull the trigger, then get more accurate reading than usual. Portable high temperature measurer to keep you away from heat danger when metal grill blacksmith forge copper melting or checking heating/cooling around the house..
  • ✅【Not for Human】 BTMETER BT-1880 is an handheld industrial IR temp ....
Check Stock

US Weight The Ingot Canopy Weight,grey,Large

  • High density polyethyelene filled with ferro cement.
  • Each weight with 2 Hook & loop fastener loop strips + 2 16" Hook & loop fastener attachment strips.
Check Stock