Top High Temperature 3d Printer Nozzle

PLA 3D Printer Filament 1.75MM 200G Pink Filament 3D Printer Consumables with 3D Build Surface Dimensional Accuracy Tolerance 0.02mm No Clogging & Bubbles for 3D Printers

  • Characteristics: This 3D printer filament PLA material has good transparency and certain toughness, compatibility and heat resistance. It is the....
  • Temperature: The nozzle temperature setting for printing with PLA is 190-210 degree. Our engineers recommend starters set 200 degree of printer nozzle....
  • Neat Winding: This printer filament has undergone strict manual inspection to ensure that the PLA filaments are neat and easy to feed and suitable for....
  • Application:The 200G Pink 3D printer filaments is used in 3D printers,which can be used to print medical skeletons, games, flower decorations, animal....
  • Preferred：The pla material is very safe and only has a small odor. It has strong layer adhesion, good melt and smooth feeding. It is your first....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Pink PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Pink PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Pink - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience),....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experien....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), U....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Marble PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Marble PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Marble - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experien....
Check Stock

Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

  • Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you..
  • Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing..
  • 32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament..
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Light Brown PLA 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Light Brown PLA 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA Filament Specs: Light Brown - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the bes....
Check Stock

Flashforge Adventurer 3 3D Printer Leveling-Free with Quick Removable Nozzle and Heating Bed, Built-in HD Camera, Wi-Fi Cloud Printing

  • 【Leveling Free】– Build plate is well leveled in the factory.Removable and Heating bed,much easier to take down models.It’s suitable for various 3d printer filament PLA,ABS,PETG filament etc..
  • 【New Quick Detachable Nozzle】– loading more smoothly with new nozzle and more compatible with third-party filaments. Remove the nozzle from extruder just in one push.
  • Nozzle fast heated to 240°C in 50 seconds.If you need to print high-temperature filaments, you could purchase additional a 0.3, 0.4, 0.6mm 265℃ nozzle..
  • 【Filament detection function】– Printing will be suspended automatically when filament is broken or used up, and printing will be resumed after user replaces the new filament..
  • 【Out of the box】– Best 3d printers for beginners,super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in mechanical engineering and electronics..
  • 【What you get】– Flashforge 3d printer Adventurer 3,12 months warranty, lifetime technical assistance and 24 hours professional customer service..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Check Stock

SUNLU PETG-G 3D Printer Filament 1.75mm 1 kg Spool, Better Flow of SUNLU no plugging Premium PETG-G Filament 1.75 +/- 0.02 mm for 3D Printing，Black

  • 【Rigid, Tough, High Performance 3D Printing Material】3d printer filament PETG-G 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60°C(140°F)..
  • 【Recommended Printing Temp/Nozzle Temperature】: PETG-G 3d printer filament suggest printing temperature is 215-230°C(419-446°F).Bed/Platform temperature of 60-80°C(140-176°F)..
  • 【High Compatiblity &100% Enviromental Material】: Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.01mm.Environmental protection, made from starch raw materials derived from renewable plant resources..
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock