Top High Temperature Printing

PLA 3D Printer Filament, Apcvo Polylactic Acid 1.75mm 3D Printer Filament Bundle 1KG Spool (2.2 LBS) 3D Printing Materials, Dimensional Accuracy +/- 0.03 mm (Gray)

  • 【Printing tips】The recommended hot bed temperature is 40-60°C, and the recommended printing temperature is 180-200°C. To avoid entanglement, insert the filament into the reel hole to fix it after each use..
  • 【Wide Compatibility】Thanks to high-quality manufacturing accuracy standards and a small diameter tolerance of +/- 0.03mm, all commonly used 1.75mm FDM 3D printers can work perfectly and coordinate with them perfectly..
  • 【PLA fiber with enhanced toughness】High-quality PLA fiber has the incredible advantage of being easy to print. Optimized printing quality, high purity, low shrinkage and excellent interlayer adhesion can meet your needs for printing projects with high toughness functional parts..
  • 【Dimensional accuracy & consistency】Advanced CCD diameter measurement and adaptive control system in manufacturing can ensure strict tolerances. The diameter is 1.75 mm, the dimensional accuracy is +/- 0.03 mm, 1 kg spool (2.2lbs), the length is about 336 meters..
  • 【No clogging, no bubbles】It has been completely dried for 24 hours before packaging, and vacuum sealed with a desiccant in a nylon repacking bag, which can make the printing more smooth and stable. Since the carbon fiber filament is easily damp, please store it in a resealable al....
Check Stock

CoYlBod Heat Tape,Heat Resistant Tape,Heat Transfer Tape,Thermal Tape,High Temperature Tape, No Residue 1/2 inch（13mm) X 33m Polyimide Tape for Sublimation,Masking,3D Printing,Electric Task, Soldering

  • 【Wide Application】The electric tape is ideal for heat press, T-shirt applications, any with htv or sublimation printing, masking, soldering, electronic repair and other DIY projects. It works well in protecting electronic products, electric motor, painting, packing fixing, printing PCB board,3D Printing, masking circuit boards, electrical insulation and splicing wires..
  • 【Easy to Use】The heat transfer tape is made of polyimide film with high temperature resistant silicone adhesive. With silicone adhesive for easy to release and leaves no residue after peeling away..
  • 【Heat resistance】Maintain high temperature resistance up to 260°C (500°F)..
  • 【Solvent Resistance】The kapton tape will not melt or fade under high heat. HN Polyimide polymers film exhibits an excellent balance of physical, chemical, and electrical properties over a wide temperature range..
  • 【Sincere Pre-Sales and After-Sales Service】We are committed to providing customers with high-quality products and sincere after-sales service. If you have any questions about high temperature tape, please feel free to contact us, you will receive a fast reply within 24 hours..
Check Stock

JAYO 3D Printer PLA Filament, 1.75mm Twinkle PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM 3D Printers, PLA Twinkle Black

  • ...he full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry free to purchase..
Check Stock

Realtree Max-4 Printed Shower Curtain ''72x72'' Inches Camouflage 1 Piece

  • 【List】The product contain gray shower curtain x 1, the size is 72x72 inch, plastic hooks and anti-rust metal rings x x12, does not contain the shower curtain rod..
  • 【Fabric】TPHIHPT camo shower curtain is made of high-quality polyester fabric, which is of high quality and not easy to tear..
  • 【HD Printing】The shower curtain is made by HD printing technology, the pattern is exquisite, not easy to fade, the high-definition printing pattern can meet your decorative requirements..
  • 【Easy to Clean】This shower curtain can be hand washed or machine washed, please note that the water temperature should not be too high, especially do not add bleach, avoid high temperature ironing..
  • 【Applicable Scene】TPHIHPT farmhouse shower curtain is not only suitable for bathroom, but also suitable for hotel, dormitory and other places. It can also be used as curtains and picnic mats to meet your multi-scene needs..
Check Stock

3D Printer Filament PLA-Meta 1.75mm, SUNLU Upgraded 3D Filament for 3D Pen&3D Printer PLA Meta, High Fluidity, No Clogging, High-Speed Printing, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, Black

  • ..., Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping..
  • 【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing..
  • 【New hue, Good Glossiness】- SUNLU upgraded 3D filament has a new hue to give you a new visual effect. PLA-Meta filament has good adhesion and super strong interlayer bonding, and the surface of the consumable has good glossiness, soft color and warm color, making 3D printed models more glossy..
  • 【Wide compatibility, After-sales guarantee】- PLA Meta is not only suitable for all models of FDM 3D printers, but also for SUNLU filament dryer box S1/ S1 Plus/ S2 full series. It is widely used, suitable for printing crafts, artwork and industrial design ....
Check Stock

JAYO 3D Printer PLA Filament, 1.75mm PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM Printers, PLA Candy Red

  • 【More easier & Smoothly & Odorless】JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
  • 【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【12 Months Warranty & Friendly After-Sales Service】 N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!.
Check Stock

R QIDI TECHNOLOGY PA12-CF Nylon Filament 1.75 Black, Carbon Fiber Nylon Filament 1.75mm 1Kg Spool 3D Printer Filament, High Strength, High Precision, No Warpage, Low Moisture Sensitivity

  • 【Excellent Mechanical Properties】An upgraded formulation of 85% PA12 + 15% Carbon Fiber, this brand new Carbon Fiber Nylon Filament has superb strength, rigidity, excellent toughness, outstanding resistance to impact, wear, chemical and temperature, these properties combined making this PA12+CF Filament an ideal choice for printing parts or personalization..
  • 【High Dimensional Stability】PA12-CF is an enhanced composite carbon fiber nylon material, adding 15% carbon fiber, this carefully formulated blend ensures ease of stable prints, extremely high successful rate, outstanding surface finish and good layer adhesion with no warping and less shrinkage..
  • 【Low Moisture Sensity】PA12-CF’s saturated moisture absorption rate is only one tenth of that of ordinary PA6. Its low moisture sensitivity ensures outstanding mechanical and thermal properties even after the moisture conditioning process..
  • 【Tangle Free & Vacuum Aluminum Foil Package】QiDi PA12-CF 1KG filament 1.75 is carefully winded to avoid any tangling issues. And we used vacuum aluminum foil packaging, its water vapor transmission rate is only 0.014%. You can open it for use without drying..
  • 【Printing Skills】QIDI TECH provide a solution for printing carbon fiber, QIDI TECH X-CF is a ....
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

3D Filament Dryer Box Filament Dry Dehydrator 3D Printer Filament Storage Box Keeping Filament Dry During 3D Printing JAYO Dry Box

  • 【Large Capacity and 99% Fitness】JAYO Dryer Box Can Fit The Max Size Coil Is Φ210*85(H)mm, It Works Perfectly with All Standard Filament Diameters....
  • 【Adjustable Temperature Range 35℃~55℃】Suit for All Brand 3D Filament on The Market, You Can Choose Different Temperature of the Drying Box....
  • 【Dry All Your 3D Filament】No Trouble with Poor 3D Printing by Wet Filament, Dryer Box(Filament Holder) can Drying while Printing to Improve 3D....
  • 【Easy to Adjustable Temperature】Only 2 Buttons to Operate The Drying Time and Temperature, Original Setting is 6 Hours and 50℃, You Can Also....
  • 【Warm Tips for Drying and Printing】Baked 3-5 hours Before Printing, It Will Have Better Printing Effect When Used with Printer. You can Try....
Check Stock

Official Creality Direct Drive Extruder Kit,New Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/CR-10 Smart Pro 3D Printers，Support 1.5mm Filament

  • [Application]100% Original Sprite Extruder Pro Upgrade Kit, just fits for Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender 3 S1/CR-10 Smart Pr0, providing direct extrusion and high temperature printing conditions..
  • [Easy to install and use] It doesn’t affect the inherent funcion of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
  • [Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C. Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • [Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity....
Check Stock

Stainless Steel Dial Thermometer 100‑800℉ Barbecue Oven Thermometer Pointer Type Thermometer Dial Thermometers for Kitchen and Outdoor Use

  • [STAINLESS STEEL MATERIAL] The dial thermometers is made of high quality stainless steel material, which is durable, not easy to rust, and can be used for a long time.
  • [HIGH TEMPERATURE RESISTANT] Dial thermometer is corrosion resistant, high temperature resistant, environmentally friendly, safe and harmless, and can be used with confidence.
  • [SCREEN PRINTING TECHNOLOGY] The dial adopts screen printing technology, the scale is clear, with correction points, and the reading is more accurate.
  • [QUICKLY RESPONSE] This bimetal thermometer is anti vibration, quickly response time, good linearity and stable performance, to meet your various need.
  • [WIDELY APPLICATION] The thermometer is widely used in many situations, such as temperature measurement of ovens and grills, very suitable for kitchen and outdoor.
Check Stock

SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black

  • ... Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock