Top High Torque Tap And Drill

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....
Check Stock

E-Z Lok Threaded Insert, Zinc, Hex-Flanged, M6-1.0 Internal Threads, 13mm Length (Pack of 50)

  • **Please do not use the self-reversing tapping heads as drill chucks.** Guaranteed depth control.
  • Chatter-free clutch has positive engagement which allows for a smoother, more accurate operation and more rapid reversal.
  • Radial Float is self-centering to compensate for hole center misalignment.
  • Unique Double Spring mechanism produces automatic feed and cushion drive. There are 2 springs for the feed and 2 springs for the reversal.
  • Pre-set torque control permits easy operation of tap brake torque control.
Check Stock

Essential Rob Halford

  • ✅ [18+1 Position Clutch] - The 18 torque of the cordless drill allows for various screwing applications and an additional 1 torque for drilling wood/metal/plastic. Multi-position clutch provides precise control of drilling to prevent screws from sinking too deep, falling off screw heads or even breaking screw shafts..
  • ✅ [20 Voltage & 266 In-lbs Max Torque] - This 20V high voltage cordless drill driver will provide up to 266 In-lbs (30N.m Max) torque rotation strength to overcome resistance..
  • ✅ [2 Variable Speeds] - Featuring a 2-variable-speed switch (0-350 and 0-1350 RPM), combined with an adjustable clutch gives you the versatility to drill different materials and use a variety of bits. Low speed for screwing and high speed for drilling..
  • ✅ [Household Hand Tools & 14” Pink Storage Bag] - The home tool set comes with many hand tools including slip joint pliers, groove joint pliers, adjustable wrench, long nose pliers, magnetic screwdriver holder, screwdriver bits, utility knife, tape measure, etc. The 14" Pink women's tool bag is great for home improvement and DIY projects..
  • ✅ [3/8” Keyless Chuck] - The 3/8" keyless chuck allows the cordless drill to use a variety of bits for common tasks around the house. With the Forward/Reverse switch y....
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

Drill America 5/8'-18 Tap and 37/64' Drill Bit Kit, POU Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 5/8"-18 hss plug tap and matching 37/64" hss 1/2" shank drill bit in plastic pouch.
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready t....
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 2 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 280 In-lb Torque, 18 Position and 22pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】Higher voltage means more torque-spinning strength to overcome resistance. 2 variable-speed ( 0-350 & 0-1350 RPM) power drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed for drilling holes..
  • 【18+1 Position Clutch & 280 In-lb Max Torque】 The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 18 Torque allows for various tasks and additional 1 torque for drilling..
  • 【2 x 1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator let you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits on your purposes. LED Light for increased visibility in enclosed ....
Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

GALAX PRO 2-Speed Drill 20V MAX Lithium-Ion Drill/Driver, 3/8'' Electric Drill with 19+1 Torque Setting, 68 Pieces Accessories Ideal for Home Improvement and DIY Project

  • 2-Speed Gearbox: High speed transmission delivers two speeds (0 - 400 / 0 - 1,500 RPM) for a range of fastening and drilling applications. The first gear provides greater torque and control and second gear provides greater speed.
  • 19+1 Torque setting & metal chuck: 20V Cordless Drill with 19+1 torque setting that can provides precise control for drilling into stone, wood, metal, plastic, and all screwdriving tasks. A maximum torque at 265 In-lbs is available for tough jobs. The drill has an all metal chuck that locks securely. 3/8'' keyless chuck for efficient changing of drill or screwdriver accessories.
  • Lightweight & compact drill: This power and incredibly lightweight drill kit is great for hard-to-reach areas and overhead tasks. Best performance-to-size ratio in its class. This lightweight yet high quality drill helps to reduce fatigue when carrying out time consuming tasks.
  • Visibility and forward/reverse functions: The cordless drill driver boasts integrated LED lights for improved visibility, allowing you to work anywhere, anytime, even in dark corners and low-light areas. A forward/reverse control button ....
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Drill America - D/ACO44P12 #44 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 4-36 hss plug tap and matching #44 hss drill bit in plastic pouch.
Check Stock