Top High Viscosity Gear Oil

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

Yukon Gear Gear Lube (OK 3-QRT-CONV) SAE 80w-90 1 Qt. Gear Oil, Pack of 3

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock

Yamaha ACC-SHAFT-LU-00 Friction Modified Plus Shaft D; New # ACC-SHAFT-PL-32 Made by Yamaha

  • Lower unit gear oil formulated to protect against corrosion and excessive wear.
  • Designed for outboard motor lower unit and sterndrive applications above 75 HP.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Extends gear life in extreme conditions including high-speed and high-horspower applications.
Check Stock

Red Line 50504 MT-85 75W85 GL-4 1 Quart 1 Pack

  • Satisfies Gear Oil Viscosity Requirements Of 75W, 80W, 85W, Sae 30 5W30 Motor Oil.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
  • This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
  • This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Polaris Hawkeye 300 2x4 4x4 OEM Oil Change Kit 2877473

  • Formerly PS-4 PLUS, same full synthetic, all-season formula..
  • Engineering approved for Polaris 4-cycle engines. Extends gear life.
  • Industry-leading viscosity range. Maximum engine protection in cold & hot conditions.
  • Kit Includes: 2 Quarts PS-4 Oil, 1 Oil Filter 2520799.
Check Stock

AMALIE (72876-56 DEXRON-VI Automatic Transmission Fluid - 1 Quart

  • Our lowest viscosity, most shear-stable ATF for consistent operation, designed to satisfy Dexron-VI, MerconSP, MerconLV, Honda DW-1, Toyota WS, Mercedes Benz NAG-2, ZF-LG 6, 6+ and 8 fluids, for use in automatic and manual transmissions.
  • Also satisfies API 70W/75W and GL-4 gear oil requirements.
  • Red Line offers the widest selection of fully-synthetic ATF on the market today.
  • Reduced oxidation and lower volatility at high temperature.
  • Allows high-temp operation without varnishing valves and clutches.
Check Stock

Fluid Extractor 200CC Oil Pump Automotive Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer Oil Extractor 7Oz

  • [LONG SERVICE LIFE] VICRING Oil Extractor syringe is made of high-quality plastic materials, with 200cc capacity, strong and durable, high strength, and long service life..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [USE WITH VARIETY FLUIDS] VICRING oil fluid extractor is suitable for power steering, coolant, oil changes, rear axle rear grease changes, and even for transferring high-viscosity fluid. Also for use with durable, oil and chemical-resistant oils, coolants, and hydraulic systems..
  • [WIDE APPLICATION] Great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for use on vehicles and machinery brake master cylinders, oil filter housings, differentials and gearboxes..
  • [FUNCTION] VICRING Oil Extractor is designed to drain or top up the master cylinder and other fluid reservoirs, draw brake fluid from the fluid reservoir, and add new brake fluid before flushing the fluid at the caliper..
Check Stock

GPI - L5116 High Viscosity Oil Pump 16 QPM 115V/230AC Oil Transfer Pump for Viscous Fluids that Features a 0.75” Ball Valve Nozzle 8 Foot Hose 3 Foot Power Cord with Three-Prong Plug 142100-01

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum....
  • HEAVY-DUTY OIL PUMP: The L5116 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other....
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of....
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and....
  • 1-YEAR WARRANTY: Built with high-quality parts, this CSA approved hydraulic oil transfer pump comes with a 1-year manufacturer’s warranty that gives....
Check Stock

VICRING Fluid Extractor 200CC Oil Extractor Pump Manual Suction Vacuum Made Plastic Automotive Fluid Syringe Pump Car Fuel Transfer 7oz Syringe Type Oil Pump

  • [FREE ALL CONCERNS ABOUT CHANGING FUEL] VICRING Oil fluid extractor is designed with a double rubber ring, which is not easy to leak oil. Oil transfer pump is suitable for power steering, coolant, oil change, rear axle rear grease change, and even for transferring high viscosity fluids..
  • [NOT EASY TO FALL OFF]VICRING Fluid extractor interface is designed with a snap so that the extension rod will not fall off easily, and with two extension rods attached, the residual oil at the bottom can be simply pumped out. The back cover of the fluid extractor pump is removable so that the remaining oil inside can be cleaned after use..
  • [EASY TO USE EVEN FOR BEGINNERS] Use the simple syringe-type actions of liquid delivery Oil Extractor syringe bottles (gearbox, brakes, steering, differential extraction dispensers) to quickly and cleanly in and out (extraction or dispensing) the liquid extractor..
  • [WIDE APPLICATION]VICRING Oil extractor pump great for extracting or changing engine oils or lubricants in boats, farm equipment, industrial gear boxes, motor bikes, motor vehicles, and ideal for ....
Check Stock