Top High Viscosity

Zahn Cup Immersion Viscosity Cup, Dip Type Stainless Steel Viscometers for Test The Viscosity of Newtonian or Approximate Newtonian Liquid (NO.2)

  • 【Precise & Credible】 The Stainless Steel Cup is made by precise mold, and the orifice is drilled using precise high-speed CNC. It's calibrated against National Institute of Standards and Technology (NIST). Therefore, you will get accurate and believable measurements with this Zahn Cup..
  • 【Durable Viscosity Cup】Our dip viscosity cups are made of premium 304 stainless steel, corrosion-resistant and solvent-resistant, thickened cup and bottom, polished surface and smooth inside, easy to clean..
  • 【Easy to Use】Stainless steel body with 12 inches loop handle for hand-dipping into liquid container, finger-ring is easy to maintain the cup in a vertical position during use. Clear nameplate number is convenient to distinguish various models at a glance..
  • 【Light & Portable】The nominal capacity of the cup is 44 ml, only 79grams, very light and portable, it’s easy to carry to laboratory, factory, workshop or field etc. You could quickly check and adjust the viscosity of liquids in anywhere..
  • 【Wide Application】 Magsoar Zahn cup is widely used in the paint industry, ideal for measure the viscosity of Newtonian or near-Newtonian liquids, such as paint, ink, dye, lacquers, varnishes, syrup and oil..
Check Stock

KUNHEWUHUA Digital Viscometer 15~100,000 mPa.s Rotary Viscosity Meter Tester NDJ-5S Newton Liquid Fluidimeter Tester 100-240v

  • ❤ 【APPLICATION】Digital rotary viscometers are widely used in the measurement of viscosity of non-Newtonian fluids such as inks, paints, coatings, adhesives, greases, juices, dairy products, cosmetics, pharmaceuticals, biological fluids, rubber, mud, pulp, etc..
  • ❤ 【FEATURES】The screen can directly display the viscosity, rotation speed, rotor number, percentage torque and other information. The full scale of the viscometer is automatically corrected according to the standard silicone oil standard value. The measurement result is accurate and reliable, and the repeatability is good..
  • ❤ 【ROTORS】Equipped with a No. 1-4 viscometer rotors. Different rotors can be selected according to the viscosity range of different test liquids, and different speeds can be set..
  • ❤ 【NDJ-8S】The NDJ-8S has a larger viscosity measurement range. The NDJ-5S can be selected for liquids with a small viscosity change range. The NDJ-9S is equipped with a temperature sensor for experimental projects where liquid temperature needs to be monitored at any time. The additional No. 0 rotor is suitable for liquids with a viscosity range of 0-15 mPa.s..
  • ❤ We are the original factory of the viscometer machine, we are confident with our products. If you have any qu....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

Liqui Moly 20012 SAE 75W-90 GL-4 Gear Oil - 1 Liter

  • Excellent aging resistance, good viscosity/temperature properties.
  • Reduces transmission noise, wide viscosity range.
  • Excellent wear protection, high rust and corrosion protection.
  • Low manual shifting effort, optimum pressure-absorption capability.
Check Stock

Valvoline, All Fleet Plus, 15W40, 1 Qt

  • Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
  • Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.
Check Stock

Idemitsu CVT Type N (NS-2) Transmission Fluid for Nissan - 5QT

  • Precisely engineered frictional characteristics outstanding anti-shudder performance in CVTs equipped with torque converter.
  • Exact frictional properties provides superior performance in demanding, high torque applications.
  • Provides superior deposit control and protects metal surfaces from rust and corrosion.
  • Advanced anti-wear technology provides maximum protection to belt and pulleys.
  • Precisely engineered formulation provides excellent viscosity control minimal viscosity loss due to shearing, outstanding low temperature fluidity, enhanced lubricant film strength at high temps.
Check Stock

Amsoil Synthetic Marine Gear Lube 75W-90 (1 Quart)

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

BAOSHISHAN NO.2 Zahn Cup Viscosity Cup #2 Dip Type 44ml Stainless Steel Viscometer Flow Cup for Paint Finishes Oil Dye Sauce Honey

  • Volume of cup: 44ml, Efflux time(sec): 20-80S.
  • Range of measurment: 20-250 centistokes (cSt).
  • Meets with ASTMD 4212 standard for measuring viscosity using dip-type cups..
  • The Stainless Steel Cups are molded precisely and the orifices are precision drilled using high-speed CNC drilling..
  • BAOSHISHAN Zahn Cups with solid construction are used to measure the flow behavior of liquids such as paints. Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed.
  • more widely used in electronic products, plastic coatings industry, home made sauce, hydraulic oil and liquid viscosity in lab..
Check Stock

BAOSHISHAN Rotary Viscometer Viscosity Tester 10-100,000mPa·s Fluidimeter Meter Newton Liquid Viscometer (NDJ-1)

  • [±5% ACCURACY] The viscometer uses a graduated disk, and the viscosity values are measured by moving the rotor rotation through the spinneret and spindle, has a large viscosity measurement range 10-100,000cps and the measurement error: ±5%, give your enough resolution to control my processes better..
  • [ROTORS x ROTATION RATE] Different rotors (1,2,3,4) can be selected according to the viscosity range of different test liquids, and different speed (60,30,12,6) can be set. The knob adjustment is straightforward with a coefficient table on the top for easy reference. You can unlock more unknown liquid viscosity..
  • [LIGHT WEIGHT BUT PRACTIALl] The rotary viscometer is light in weight, easy to move and operate flexibly. The helical gear lifting system effectively ensures that the viscometer can move up and down easily without sliding down by itself, which ensures the smooth progress of your experiment..
  • [APPLICATION] NDJ-1 has been widely used to determine and measure the liquid viscosity in many application such as grease, painting, plastic, pharmacy and adhesives. There are no limitations about the liquid, just put the rotor into the liquid and test it. But the liquid you measure should NOT exceed 80℃.
  • [GOOD WARRANTY] Viscosity meter tester is a precison ....
Check Stock

Red Line 57904 75W90 Synthetic Gear Oil - 1 Quart

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock