Top High Voltage Magnet Wire

5 CORE 6″ Inch Subwoofer Car Audio 300W Peak Power Sub Woofer Loudspeaker Wide Range High Power Bass Surround Sound Stereo 4 Ohm, 8oz Magnet Car Speakers with PP Cone Red, WF 672 PP

  • ...apton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
  • 8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
  • Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
  • Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
  • 5 Core uses highly adhesive in the assembly of the Speaker for strong bonding between all parts of it. Best quality Lead-free solder used for a strong connection between Coil wire, Tag, and Copper tensile wire. Best Flexibility Spiders/Dampers for accurate cone movement..
Check Stock

OSD Commercial 70V Transformer for Speakers, 20W, 15W, 10W, 5W (1, 3, 6, 12 Packs) (6 Pack)

  • Reduces 240 x 480 V (primary voltage) to 120 x 240 V (secondary voltage).
  • Silicon steel-laminated core and copper magnet wire for increased transformer efficiency.
  • Epoxy-encapsulated to resist moisture, dust, and industrial contaminants.
  • Built-in fuse clips on secondary side save panel space and wiring time because they do not have to be manually installed in the field.
Check Stock

New PM Alternator/Regulator Compatible with/Replacement For John Deere Utility Tractor 2210 2305 2320 2520 MIA10312, SE501843, MIA10338, SE501822, AM877557, AM879144, CH15587, MIA881692, AM877958

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed).
  • Specs: Alternator, Voltage: 12, Amps: 15, Notes: Permanent Magnet, Closed Back.
  • Specs: Regulator, Electronic & Rectifier, Voltage: 12, Polarity: Negative, Includes Brush Holder?: No, Adjustable?: No, Includes Rectifier?: Yes, Includes Tolerance Ring?: No, Notes: (3) Blue Wires: Stator, (2) Red Wires: B+, (2) Black Wires: B-, (1) Yellow Wire: Ignition, (1) Green Wire: Light.
  • Replaces OEM Part Numbers: Alternator- John Deere: MIA10312, SE501843, MIA10338, SE501822, AM877557, AM879144, CH15587.
  • Replaces OEM Part Numbers: Regulator- John Deere: MIA881692, AM877958.
Check Stock

Siemens MT0050F Industrial Power Transformer, Domestic, 208/277 Primary Volts 50/60Hz, 120 Secondary Volts, 50VA Rating

  • Reduces 208/277 V (primary voltage) to 120 V (secondary voltage).
  • Silicon steel-laminated core and copper magnet wire for increased transformer efficiency.
  • Epoxy-encapsulated to resist moisture, dust, and industrial contaminants.
  • Built-in fuse clips on secondary side save panel space and wiring time because they do not have to be manually installed in the field.
Check Stock

BNTECHGO 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0122\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 4 ounces(527 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0122"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 20 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0315' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 20AWG magnet wire is 4 ounces(80 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 20 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0315"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 22 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0256' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 22AWG magnet wire is 4 ounces(122 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 22 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0256"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BNTECHGO 26 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 4 oz - 0.0157' Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 26AWG magnet wire is 4 ounces(323 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 26 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0157"for perfect thickness..
  • BNTECHGO magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 24 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0221\ Diameter 1 Spool Coil Red Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 24AWG magnet wire is 1.0 pounds(823 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 24 gauge enameled magnet wire: Wrapped in spool and color is red.Outside diameter 0.0221"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock

BINNEKER 28 AWG Magnet Wire - Enameled Copper Wire - Enameled Magnet Winding Wire - 1.0 lb - 0.0126\ Diameter 1 Spool Coil Natural Temperature Rating 155℃ Widely Used for Transformers Inductors

  • High Quality enameled Copper Wire!Durable and not break while winding the coils.Highly Efficient!.
  • Magnet wire is copper wire that coated with a thin layer of insulated enamel.This 28AWG magnet wire is 1.0 lb(2120 feet).The copper strands conducts,the insulation is made from modified Polyester with a Polyamideimide overcoat,and protects the coiled wire from short-circuiting..
  • This varnished copper wire is constructed with premium enamel insulation.Temperature rating 155°C (311°F) makes it suitable for several thermal overload applications.Raw copper is drawn to meet specific size requirements based on NEMA MW-35-C standard..
  • 28 gauge enameled magnet wire: Wrapped in spool and color is natural.Outside diameter 0.0126"for perfect thickness..
  • BINNEKER magnetic copper wire is widely used in the construction of transformers,wound coils,motors,solenoids,instruments,inductors,speakers,electromagnets,and other applications that require tight coils of insulated wire..
Check Stock