Top High Voltage System

Whatever (Japanese EP)

  • ✦Tracer-AN series support PC software, APP and MT-50 to monitor or set the parameters. Automatically identifying 12/24/36/48V DC system voltage, compatible with various battery options: Sealed, Gel, Flooded and Lithium..
  • ✦Maximum input current: 100A. Maximum PV input power: 1250W/12V.
  • 5000W/48V. Maximum input voltage(open circuit voltage): 150V. Common negative grounding..
  • ✦Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
  • maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%..
  • ✦With Battery temperature compensation function, real-time energy recording and statistical function. Hundred percent full load operation in working environment temperature range within charging & discharging..
  • ✦The isolated RS485 interface with standard MODBUS communication protocol support up to 8 charging in parallel, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring etc..
Check Stock

Smart Bluetooth 12V 300Ah Deep Cycle LiFePO4 Lithium Iron Phosphate Battery, Low Temperature Charging (-4℉/-20°C), 4000+ Deep Cycles,Built-in 200A BMS, Mobile Phone APP Monitors Battery SOC Data

  • 【App Smart Monitor】Compared with the traditional battery monitor, Bluetooth lithium battery has add Bluetooth function and Obtain Various Data (Soc) Of The Lithium Iron Phosphate Battery. Customers Can connect to the battery through the mobile phone app, and read the battery Voltage, Current,Charging Power,Battery Capacity and Battery Cell Temp,Series/Parallel Battery And Other Important Information at any time. Wireless connection range: within 5-10 meters from the Battery..
  • 【Heating Function】When the smart battery starts charging, it will Auto turn on the heating function inside the battery. Ensure that the battery cell delivers power in the suitable possible condition. When the ambient temperature is lower than 32°F (0°C), the charging current will supply power to the heating film inside the battery. When the internal temperature of the battery reaches 50°F (10°C), BMS will immediately turn off the heating function, all the charging current charges the battery..
  • 【Built-In 200A BMS】12V Lithium Battery has Built-In BMS (Battery Management System) to monitor the voltage of every cell and protect it from overcharge, over-discharge, overload, overheati....
Check Stock

Painless Performance 30100 Universal 70-amp Electric Fan Relay Kit

  • Ideal for use with high amperage single fans or with standard dual cooling fan applications.
  • Protects the electrical system from voltage and amperage spikes and prevents the fan from feeding voltage back through the vehicles' wiring system.
  • Kit includes: SPST 70-amp heavy duty relay, relay base with harness (6' input, 2' output), 70-amp maxi fuse with mounting base and cover, crimp on terminals & mounting hardware.
Check Stock

Spark Tester Auto Ignition Tester Pen Ignition Spark Indicator Spark Plugs Wires Coils Diagnostic Tool Car Voltage Cable Tester Detector

  • ...ar's ignition system is working properly, avoid fire and burn out the ignition coil. This new high-pressure detector is very easy to use. If the ignition system is OK, the internal LED indicator will show you..
  • ✿No need to disassemble: No need to disassemble any line to test the performance of the spark plug, high voltage wire and ignition coil. When the engine is started or running, place the end of the detection pen on the high voltage wire light-emitting tube..
  • ✿High-quality materials: This ignition test pen is made of high-quality aluminum material, which makes the product have good durability and high quality. With durability and high quality. Very environmentally friendly, this material has a dense oxide film on the surface. This film prevents corrosion, so it is very durable..
  • ✿Convenient and fast: This professional test pen is made according to production technology, providing a healthy and reliable troubleshooting method, convenient, economical and time-saving. The metal tip of this test pen makes the product easy to insert and rugged, making it your right choice. The slotted end of the test part makes the contact area between the wire and the instrument large, and the test is accurate.
  • Note: For detailed product parameters, refer to the i....
Check Stock

TUXING 4500Psi Pcp Air Compressor, Scuba Tank Air Compressor, High Pressure Diving Compressor for Scuba Tank/PCP Rifle/Paintball Air Gun Filling Station

  • LIGHTWEIGHT AND COMPACT: At 51.1lbs. this dual handled high-pressure compressor can be transported with minimal effort and minimal fatigue on the body..
  • ULTRA QUIET: Built with DC Brushless Motor that is more powerful, quieter and lighter than conventional motors..
  • AUTOMATIC SYSTEM ADJUSTMENTS FOR MAXIMUM PERFORMANCE: An inverter circuit on the motor adjusts the RPM to extract the maximum performance depending on the voltage level..
  • USER FRIENDLY DIAGNOSTIC SYSTEM: LED light and beeping system that indicates problems with the compressor (i.e. high temperature or low voltage)..
  • CONNECT UP TO 4 TOOLS AT ONCE: 4 Air-outlets provide flexibility | 2 outlets for high pressure tools. 2 outlets for regular pressure tools..
Check Stock

Solid State Relay, 90 to 280VAC, 25A

  • Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
  • Model: XRE-1D4840 Solid State Relay 40A DC to AC..
  • Input voltage: 3-32V DC Output voltage: 24-480V AC.
  • Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
  • Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check Stock

Amrex 2\x2\ Sponge Insert Replacements From Caputron (10 Inserts/Pack)

  • Design The Output Contact Adopts Relay, Which Can Withstand Large Output Current, And Can Set System Parameters According To The Button, So As To Meet The Application Of Different Occasions..
  • Characteristics Dc20D Is One Module Used For Diesel Engine Or Generator. The Status Of The Engine And Generator Can Be Checked Conveniently..
  • MultiFunctional It Is With The Functions Of Auto Start/Stop, Protection And Alarm Indication. Dc Power And Running Situation Is Indicated On The Front Panel..
  • Easy To Use Add Current, Speed Measurement Display Function, Add Rs485 Interface, Can Be Connected To The Computer..
  • Good Effects Over Frequency, Low Frequency, Over Voltage, Under Voltage, Low Oil Pressure, High Temperature, Low Water Level, Low Oil Level, Charge Failure, OverTime Stop, Emergency Stop Alarm System As Well As Low Battery Voltage Can Be Indicated In Time..
Check Stock

Hoodman Drone Tripod Mount for DJI Cendence Remote Controller

  • 600TVL perfect picture quality, specially designed for outdoor flying..
  • Low Power Consumption and Low illumination, 1/3" SONY SUPER HAD II CCD,Nextchip 2040 DSP.
  • VTX 5V Out for Cam, Operating Voltage: 7-20 V Output Voltage(VOUT): 5 V,use 2S-4S battery,can not 6S battery.
  • A ready to fly vtx+cam fpv system. High Picture Quality NTSC CCD Camera.Easy to use 2 buttons and 2 LED display to change channels and frequencies..
  • Low power consumption most affordable fpv system, suitable for all quadcopter and drones..
Check Stock

Amprobe AT-8020 Advanced Industrial Wire Tracer Kit

  • 【FUNCTION UPGRADE】 KZYEE KM50 Circuit Tester Kit is an upgraded version of KM10, which performs each type of testing modes, like DC Voltage, AC Voltage, Signal Frequency, Duty Cycle, Fuel Injection, Resistance, and Diode.
  • 【QUICK DIAGNOSIS】Quicker troubleshoot and diagnose circuit conditions by switching waveform display from the digital display for AC Voltage, Frequency, Duty Cycle, and Fuel Inject testings by long-pressing the mode button for 3 seconds.
  • 【WIDELY APPLICATION】Works on 12V 100-2000CCA lead acid batteries , including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB. Also, it is suitable for cars, motorcycles, trucks, ATVs, SUVs, boats, yachts, mowers, and even golf carts and lawn tractors batteries.
  • 【CRANKING & CHARGING SYSTEM TEST】Presents you with the test results (actual cranking voltage & cranking time) of the starter system in milliseconds to indicate if the cranking system is working as expected. Also, the battery load tester conducts a throughout check on the 12V charging system to make sure a normal generator output，perfectly working rectifier diode and under controlled charging current.
  • 【SAFE PROTECTION DESIGN】The battery tester doesn’t emit light, heat or spark, and won’t discharge the battery. It ....
Check Stock

PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】(MPPT-60A)

  • ❶【Software Update Version】100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
  • ❷Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording..
  • ❸Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
  • ❹Intelligence Fan-on temperature 003e45℃ and off 003c 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
  • ❺【What You Get】we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. copper wires:9....
Check Stock

Hotcoat PCS-250 Powder Coating System | Innovative Dual Voltage with Minimal Overspray and Larger Ground Clamp | Powder Coating Machine with Clear Bottle

  • POWDER COATING SYSTEM: Eeastwood’s PCS-250 dual-voltage powder coating system is a breakthrough refinishing system for the home hobbyist providing professional performance at a fraction of the cost of industrial equipment. The cured finish resists most chemicals, fuels, acids, thinners, brake fluid, UV light, and is much more durable than liquid coatings (up to ten times)..
  • BEST USE: Powder coating is a very popular type of finishing for steel and other metallic products. It protects the surface from scratches, chipping and corrosion. Additionally, it is the most durable finish available today because it offers a high scratch resistance as well as weatherproofing to prevent corrosion..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • WHAT’S IN THE PACKAGE: PCS-250 Dual-Voltage HotCoat Powder Coating Gun, dual-voltage power supply, activation switch, ground clamp and cable, and an empty 8-oz. clear bottle..
  • WARRANTY: Comes with a 1-year limited warranty and 90-day....
Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA201 Car 12V 100-2000 CCA Battery Load Tester

  • Includes: 1 x PB100 Circuit Tester, 1x BA201 Battery Tester.
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
  • Easy to check the cranking and charging system condition. Cranking test displays cranking time, voltage and status, which helps you test and analyze the starting motor to check it works properly or not. Charging test displays load voltage, unloaded voltage, ripple status, charging system status to avoid damaging the battery and shortening its life greatly due to overcharging or incomplete charging..
  • Monitors the real-time voltage through the Waveform graph, displays current voltage, maximum and minimum voltage during ignition. According to analyze the values of discharge voltage, starting voltage, and cha....
Check Stock