Top High carbon Steel Reamer

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

Capri Tools Telescopic Tube Cutter, 1/8-1-3/8 in.

  • The Telescopic Tube Cutter lets you easily make clean and precise tubing cuts on hard and soft copper, aluminum, brass, thin-walled steel, and plastic tubing in 1/8 to 1-3/8 in. outer diameter.
  • Heavy-duty ergonomic tightening knob with ultra-smooth turns gives you maximum control of cutting pressure. Precision four-roller set helps make precise cuts easy. Rollers also have flare grooves for close-to-flare cutting.
  • Fast, tool-free blade replacement: release or secure the detent wheel pin with a simple push.
  • Built-in retractable reamer deburring tool with replaceable blade.
  • Comes with a high carbon steel cutting wheel for making clean and precise cuts.
Check Stock

RLECS 1/8-1/2 (3-13mm) T Handle Tapered Reamer Tool, 6 Fluted Bridge Pin Hole Reamer Tapered Woodworker Cutting Tool

  • Material: High carbon steel, bearing steel.
  • Expanding holes: Ideal for drills to break sheet metal, aluminum plate, plastic and other materials effortlessly..
  • The T-shaped handle provides leverage, making reaming easier, stronger control, and easier turning..
  • Deburring: Suitable for taper holes and chamfering on wooden boards to remove burrs and facilitate screw sinking..
Check Stock

Viking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

HOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US

  • 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
  • Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
  • Reamers designed for enlarging previously formed or drilled holes.
  • 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock

High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm

  • Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
  • Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
  • Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
  • Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
  • Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Check Stock

Hand Reamer, Bridge Pin Hole Handheld T Shape Tapered Hex Reamer Handle Drilling Tool 1/8\-1/2\ 3-13mm

  • 【HIGH HARDNESS AND DURABILITY 】This machine reamer Made of high speed steel, these reamers have high hardness and durability..
  • 【FUNCTION】 T-handle providing optimal leverage.Removable handle for compact storage..
  • 【WILDLY USED】Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes..
  • 【SIZE】 Length: Approx. 128mm / 5.0in(Tapered Reamer).
  • 【HIGH ACCURACY AND LONG SERVICE LIFE】 This machine reamer with Sharp cutting-edge, high cutting ability, high accuracy, long service life..
Check Stock

ZKTOOL 14mm Cylinder Head Rethreaded Kit, Spark Plug Thread Repair Kit,14mm Reamer Cylinder Thread Repair Tool,Spark Plug Rethreader Kit,4 Thread Insert. M14 x 1.25

  • Choice: The thread repair tool kit is a tool for spark plug repair. This tool does not require any difficult operation and is suitable for everyone. For the convenience of use, you can add some thread locking agent, (Rethread Aluminum Heads Only)..
  • Advantages: Chrome vanadium steel (CR-V) 14mm 12-point threaded reamer with a total length of 2.5 inches and four 3/8-inch, 7/16-inch, 1/2-inch and 3/4-inch carbon steel blades. Compared with similar products, we have optimized the quality. Will not be easily damaged..
  • Operation: Repair and repair the chrome vanadium steel (CR-V) M14 x 1.25 internal thread size on the sleeve by cutting the thread, and repair the plug in the aluminum head. The socket includes a metal retainer for fixing the plug inside during installation and removal..
  • Packaging: The re-threading kit includes a tapping reamer and 4 blades of different sizes and depths for your convenience..
  • Service: We provide product package return and exchange service for a better customer experience. If you have any questions, please contact us, we are online 24 hours.
Check Stock

ikkle Screwdriver Holder, Wall Mounted Tool Storage Organizer, Pliers Rack Chisel Holder, Upgrade Wood Shop Tools Rack Wrench Clamps Screwdriver Organizer for Workshop Garage and Workbench

  • The General Tools and Instruments 131 Screwdriver Handle Reamer, 3/32” – 3/8"offers high-powered cutting in a design that is easy to use.
  • The fluted handle allows a familiar, screwdriver grip for heavy cutting and deburring.
  • Works easily on steel, brass, aluminum, plastic, wood and wallboard.
  • General's easy-to-use reamer is perfect for in home plumbing.
  • Actual reamer made of hardened and ground tempered steel.
Check Stock

0-14mm Body Reamer Hole Puncher Straight Scissors and Curved Scissors Set Universal Tool for RC Car Body Shell Hobby Repair Tools

  • Material: High quality steel with super hardness,durable and exquisite-crafted..
  • Scissor: Stable and solid, hard to deform, curved blade designed to cut body shell at ease, saving time and effort..
  • Reamer: Slip-resistant designed reamer handle and optimal shaped drill for comfortable grip and easy operation..
  • Application: Necessary tools to punch holes and trimming lexan plastic body shell drills of rc hobby car quadcopter helicopter boat airplane can opies....
  • Package: 1 curved tip scissor + 1 standard scissor + 1 body reamer w/sleeve. 100% brand new and high quality guaranteed..
Check Stock

Magisso Bulb Citrus Reamer #70308 Stainless Steel with Bamboo Stand

  • ENDLESS JUICING OPTIONS: It’s known that fresh juices are both healthier and tastier than their sugar loaded, from concentrate counterparts. Start making your own delicious juices or adding your own citrus zest to recipes conveniently with the Magisso Citrus Reamer. Citrus will have never tasted so good..
  • DOUBLE ENDED SHAPE: The double ended design of this Citrus Reamer is perfect for juicing any size of citrus fruits and ergonomically designed for any size hands. Make your own fresh orange juice or add some lime juice to a margarita. Both ends are guaranteed to ream your fruits quickly and with ease..
  • SLEEK ELEGANT DISPLAY: This Citrus Reamer is designed to be attractive as well as functional. When not in use, it sits stylishly in the bamboo stand on your counter. You can store it in a cabinet or drawer as well, but it’s sure to be too useful and striking to be hidden away..
  • FABULOUS FINNISH DESIGN: All Magisso products are made with desire to solve problems and create beautiful designs. We work with a team of talented designers who understand and value Finnish forms and functions. Each product is meticulously planned to add convenience and style to your home and life..
  • PRODUCT SPECIFICATIONS: Package contains (1) Magisso Stainless Steel Citrus Ream....
Check Stock