Top High efficiency Machining

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

Lock Nuts, 1Pc High Accuracy Metal Lock Nuts Built-in Brass Pad Ball Screw Lock Nuts (M12*1mm)

  • High accuracy lock nut with built-in brass pad, no damage to the teeth.
  • This using of lock nut can ensure that the screw runs without deviation.
  • High efficiency, low cost and efficient design.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

uxcell Machine Tap 10-32 UNF Thread H2 Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 5pcs

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock