Top High flow Breather System

3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

ALAVENTE Universal Oil Catch Can Tank with Breather 400ml Aluminum Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit Black

  • √ STRENGTH & DURABILITY - The oil catch can breather made of high quality 0046 aluminum to provide you with higher strength and durability. And it's also very lightweight, universal for most car..
  • √ PRESERVE ENGINE LIFE&INCREASES HORSEPOWER - This oil catch tank catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. The catch can will keep out the dirt and oil get inside your engine from your intake system. To keep engine clean, Increases horsepower and preserve engine life.
  • √ HARD TO OIL LEAKAGE & EASY TO CLEAN - Large oil catch can with drain valve, it is fully tig welded and thread come with o-ring gasket to prevents oil leakage.You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily.
  • √ 2 METHODS OF INSTALLATION - Come with air filter, you could use it as vented system, or you could ignore it. Any way you need. There is also a washable stainless screw on filter / breather with hose clamp to stop it coming loose with vibration.
  • √ 400ML CAPACITY for UNIVERSAL CAR - The capacity is 400ml, enough for daily use.
Check Stock

muge racing Universal Oil Catch Can Tank Kit Polish Baffled Reservoir with Breather Filter with 3/8' Fuel Line,Aluminum,Red,400ml

  • ... keeps engine clean and prolongs engine life.The hose clamp reinforcement to prevent the hose from falling off. Three different sizes of adapters can fit for different size hose and come with o-ring gasket to prevent oil leakage. Built in dipstick to check fluid level without opening it frequently,You could use the breather filter as a vented..
  • √ 2 TYPES OF INSTALLATION - Easy to install oil catch can with breather filter as a vent system or without breather filter as a seal can, all for your option..
Check Stock

JDMON Oil Catch Can Tank Kit with Breather 300ml Aluminum Polish Engine Air Oil Separator Tank Reservoir Kit Universal (Blue)

  • 6061 Aluminum Durable Quality: JDMON oil catch can with breather is made of sturdy T6061 aluminum for enhanced strength and durability,not easy to be damaged and lasted for long time.Note: The hose can’t resist high temperature, you’d better purchase another rubber vacuum hose to meet your demand..
  • Increases Horsepower& Keep Engine Clean: This universal oil catch can catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It will prevent the dirt and oil from your intake system into your car engine which can keep the engine clean and preserve engine life..
  • Prevent Oil Leak: JDMON oil catch can kit is built-in o-rings which can prevent oil leak..
  • Easy to Use & Clean: This oil catch can set came with dipstick, measuring fluid level no need to open the can. The material of it is polished, so it’s easy to clean, no need any tools..
  • Package Includes: 1*300ml oil catch can, 1*hose,1*Breather Filter, Necessary Bracket & Screws as picture shows.
Check Stock

10 Pack Motorcycle Fuel Tank Air Vent Gas Cap Oil Vent Breather Hose Tube PRO BAT Gas Tank Cap Vent for Dirt Bike Pit Bike ATV All Factory CRF XR CR All Quads All Off-road Motorcycle Blue

  • ★6 colors CNC machined / Colour anodised / Two-way breather. This fuel tank vent tube solves these problems by having two-way valve that lets air in....
  • ★CNC fuel gas tank cap cover air vent tube breather keeps the fuel tank air ventilated, but does not let fuel flow out. One way valve for preventing....
  • ★100% Brand new, never mounted, easy to install.It has gorgeous anodized surface and incredible light.High quality CNC fuel gas cap air vent tube....
  • ★Size: 2.6"(L) x 0.2"(R), Color: Red/ Blue/ Black/Green/ Silver/ Yellow..
  • ★Please check pictures and specifications for compatibility. Quality assurance, unconditional lifetime guarantee, so you can purchase now with....
Check Stock

RULLINE Oil Catch can kit,air Oil Separator,Oil Catch Can Tank Universal Reservoir with Breather Hose Kit Aluminum Polish Baffled 350ml Black

  • ★[ Capture Oil & Keep Engine Clean ]-- The oil catch tank will catch the oil and moisture from PCV/CCV air, prevent carbon and sludge build-up in....
  • ★[350ML Capacity & Universal ]-- The capacity is 350ml,enough for daily use.Universal for most cars and small parts of motorcycles..
  • ★[ Come with Oil Dipstick ] -- It is convenient to check the fluid level in catch can by oil dipstick without opening it frequently.
  • ★[ Superior Quality ] -- Made of high quality 0046 aluminum for added strength and durability, fully tig welded, lightweight and corrosion resistant.
  • ★[ 2 Types Of Installation ]-- Easy to install oil tank with breather filter as a vent system or without breather filter as a seal can, all for your....
Check Stock

HPDAVV Gas Driven Piston Air Compressor 6.5HP - One Stage - Fit For KOHLER RH65 Engine - 20Gal Tank - 17cfm @ Max 125psi - Portable Compressed System

  • 【Specification】: Voltage: 110v, frequency: 60Hz, power: 2.2kw, flow: 45L / min, working pressure: 30MPA / 300bar / 4500psi,Suitable for filling bottles with large capacity, it takes about 3 minutes to fill 0.5 liters from 0-300 bar and it takes about 45 minutes to fill 6.8 liters from 0-300 bar.
  • 【Auto Purge Version】: Auto stop and auto purge version/shut off automatically when it reaches the compressor you set and auto purge at the same time.
  • 【Adjustable Pressure Version】:This model of pcp air compressor come with adjustable pressure function , it can easily reach 4500psi and automatically stop filling when the pressure reaches you set.
  • 【Cooling system】: A battery-powered digital thermometer monitors an independent water cooling system. You need to prepare cooling water in an external bucket. Do not start the machine without preparing cooling water. Before using the compressor, replace the oil breather and top up with oil.
  • 【Wide Application】:Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc..
Check Stock

JINGKE CNC Aluminum Gas Fuel Tank Cap with Breather Valve for 50cc 70cc 90cc 110cc 125cc 140cc 150cc 160cc Pit Dirt Motor Bike Dirt Bike ATV Taotao SSR Roketa (GOLD)…

  • compatible with：Universal parts, will fit most Chinese made Dirt Bikes, Pit Bikes,SSR, Coolster,Taotao etc on the market. Not applicable to Prox 50cc，2015 SSR110.
  • Function: this pit bike fuel cap cover is suitable for many motorcycles that prevent oil leakage when driving on the way. The fuel tank cover is equipped with a venting hose that allows air to enter the fuel tank but does not flow out of air or oil. It is the best choice for motorcycle accessories..
  • Features：as fuel tank cap+ gas fuel breather hose adopts CNC high-quality material, firm and durable, not easy to deform.long use time.
  • Size：Inner diameter(thread) is1.93''(49mm) Products include：1 x Fuel cap + 1 x Breather valve+1 x rubber pad.
  • Professional after-sales：We sell professional parts ，and provide free technical support. If you have any problems or dissatisfaction after receiving the products, please contact us directly to get New Replacement or Return..
Check Stock

4-Way Solenoid Valve 1/4\ With All Fittings (12-Volt) for Pneumatic Cylinders, Includes 1/4\ push-in air fittings and speed control brass mufflers

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 1/4"air ports and one 1/4"breather port. Comes with: 1/4" 4-Way Solenoid (2) 1/4"Male Straight fittings with 1/4"push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

TUXING 4500Psi Pcp Air Compressor,Scuba Tank Air Compressor,Mini-Double Cylinder High Pressure Air Compressor for Paintball/Scuba Tank Filling 110V (TXEDM041)

  • 【Specification】Voltage: 110v, frequency: 60Hz, power: 2.2kw, flow: 40L / min, working pressure: 30MPA / 300bar / 4500psi,Suitable for filling bottles with large capacity, it takes about 3 minutes to fill 0.5 liters from 0-300 bar and it takes about 45 minutes to fill 6.8 liters from 0-300 bar.
  • 【Two Stage Compression Cylinder】Designed with two-stage compression to ensure stable performance, suitable for car tires, bicycle tires, blown pneumatic PCP air rifles, paintball tanks, air gun equipment or diving / diving cylinders.
  • 【Manual shut-off】: sensitive and accurate response, easy-to-understand readings, correct display of the air pressure value of the air compressor, easy to control and adjust the pressure value required for different jobs..
  • 【Excellent water and fan cooling system】 - A battery-powered digital thermometer monitors an independent water cooling system. You need to prepare cooling water in an external bucket. Do not start the machine without preparing cooling water. Before using the compressor, replace the oil breather and top up with oil.
  • 【Wide Application】:Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc..
Check Stock

TUXING 4500Psi Double Cylinder Pcp Air Compressor,High Pressure Air Compressor, Auto Stop and Auto Purge Version,Pcp Compressor for PCP Rifle Tank Gas Scuba Filling 110V (TXED013)

  • 【Auto Purge Version】: Auto stop and auto purge version/shut off automatically when it reaches the compressor you set and auto purge at the same time.
  • 【Specification】: Voltage: 110v, frequency: 60Hz, power: 2.2kw, flow: 45L / min, working pressure: 30MPA / 300bar / 4500psi,Suitable for filling bottles with large capacity, it takes about 3 minutes to fill 0.5 liters from 0-300 bar and it takes about 45 minutes to fill 6.8 liters from 0-300 bar.
  • 【Specially Point】:This model of pcp air compressor come with adjustable pressure function , it can easily reach 4500psi and automatically stop filling when the pressure reaches you set.
  • 【Cooling system】: A battery-powered digital thermometer monitors an independent water cooling system. You need to prepare cooling water in an external bucket. Do not start the machine without preparing cooling water. Before using the compressor, replace the oil breather and top up with oil.
  • 【Wide Application】:Perfect for fire fighting, paintball, leakage detecting, pressure-tight test, automobiles, air impermeability test, pressure proof test, etc..
Check Stock

BILLET SPECIALTIES OVAL RETRO SCRIPT 1.25\ ALUMINUM PCV BREATHER,POLISHED,1.25\ DIAMETER VALVE COVER HOLE,# 21923

  • Brand New Retro Script Polished Aluminum 1-1/4" PCV Breather, Compatible with Valve Covers with a 1-1/4" Breather Hole. This PCV Breather is produced by Billet Specialties Inc. (Part #21923).
  • Draw the attention to your engine compartment with this Retro Billet Specialties Script polished aluminum PCV breather. This Billet Specialties breather fits smoothly in the valve cover and is easily maintained with a washable filter element, and features a unique 2 piece design with a positive o-ring seal..
  • Features: Retro Script Polished Finish | Replaceable PCV Valve with a barbed fitting for 3/8" hose | Precision machined from 6061-T6 billet aluminum | Easily maintained | 1-1/4" diameter for valve cover | Made in the USA.
Check Stock