Top High performance Extruder

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

  • Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
  • Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
  • Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
  • Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
  • Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..
Check Stock

Official Creality Direct Drive Extruder Kit,New Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/CR-10 Smart Pro 3D Printers，Support 1.5mm Filament

  • [Application]100% Original Sprite Extruder Pro Upgrade Kit, just fits for Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender 3 S1/CR-10 Smart Pr0, providing direct extrusion and high temperature printing conditions..
  • [Easy to install and use] It doesn’t affect the inherent funcion of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
  • [Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C. Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • [Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity....
Check Stock

2022 Official Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor, Direct Drive Upgrade Kit for Creality Ender 3 pro, Ender 3, Ender3v2, Ender 3 Max, Support TPU Filament

  • [Application]100% Creality Original Sprite Extruder Pro Upgrade Kit, just fits for Ender 3/ Ender 3 Pro/ Ender 3V2/ Ender3 Max, providing direct extrusion and high temperature printing conditions..
  • [Special Design] Exquisite design, perfect combination of extruder and printing hotend make more powerful functions. Large torque, extrusion force up to 80N. Double gear feeding, stable and reliable. The double tooth structure does not damage filaments and the feeding is more reliable and stable. All-metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • [Strong compatibility] Compatible with more types of filaments including PLA/ TPU/ PETG/ ABS, etc. When printing under high temperature, like flexible TPU. It can potimize TPU printing performance. Multi-material capability enjoys more creativity..
  • [Easy to install and use] It doesn’t affect the inherent function of printer because it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly....
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • 【TITAN DIRECT DRIVE】✔️The direct extruder for Creality CR 10 v3 is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing..
  • 【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage..
  • 【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard..
  • 【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and make....
Check Stock

Creality Ender 3 Direct Drive Upgrade Kit, Ender 3 Pro/Ender 3 V2 Direct Drive Extruder with 42-40 Stepper Motor, Hot End Kit, Fan and Cables, Support BL Touch

  • Upgraded 3d printer extruder for Ender 3, Ender 3 Pro and Ender 3 V2 3D Printer. Customer Services: If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the ”Your Orders“page. We will respond with 24 hours..
  • Support all 1.75mm diameter filament in the market, offers more precise and smoother extrusion..
  • Perfect for PLA and optimize the performance of remote printing with TPU and other flexible filaments..
  • Comes with 42-40 stepper motor. This direct extruder kit is made of aluminum alloy and plastic, durable and wear resistant..
  • With longer Extruder motor connecting cable, tools, accessories and wiring diagram instruction for installation, easy to assemble..
Check Stock

3D Printer Nozzle Cleaning Tool Kit - 0.4mm 0.35mm Needles Tweezers Filament Clog Cleaner Accessories Part Drill Bits 27pcs Mika3D

  • Great Value: Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc....
  • Good Performance Needles: The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small....
  • High Quality Tweezers: It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and....
  • Wide Compatible: Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc.
  • Good Package and Warranty: All of 26pcs packed in one safe handy bottle,We are Confident about Product Quality,Within 12 hours response,100%....
Check Stock

Creality Sprite Direct Drive Extruder Pro Kit, All Metal Extruder Upgrade Kit for Ender 3/Ender 3 v2/Ender 3 Pro/Ender 3 Max 3D Printer,Dual Gear Dual Fan Design,Support BL Touch/CR Touch

  • 【All Metal Design-High Temperature Printing】Creality Sprite direct drive extruder pro kit perfectly combine extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • 【Dual Gear Feeding- Powerful & Stable】This direct drive extruder adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extruder force up to 80N. More precise control of feeding withdrawal..
  • 【Small and Exquisite, Bowden & Direct Extrusion Suitable】With Compact and light weight design, 54x50x64.3mm small size, 288g weight. It can be applied to direct and bowden filament feeding to meet printing needs of users at dirct and bowden extrusion. Better effect for PLA, PETG,ABS, TPU and other flexible filament..
  • 【Dual Fan-Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation. High quality silent fan with metal fan cover, ensures s....
Check Stock

Official Creality 3D Capricorn XS Series Bowden Tube, PTFE Bowden Tube (2 Meters) with 4Pcs PC4-M6 Fittings and 4Pcs PC4-M10 Fittings for 3D Printer 1.75mm Filament

  • Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing..
  • Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend..
  • Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260℃..
  • Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm ± 0.05mm inner diameter, 4mm outer diameter). Reducing the "wiggle room" or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems..
Check Stock

FlashForge Adventurer 4 3D Printer Auto Leveling with Quick Removable Hign Temp Nozzle Magnetic Flexible CNC Platform and HEPA13 Air Filter 220x200x250mm Printing Size

  • 【Large Size & Fast Printing】Compared with Adventurer 3, the print volume of Adventurer 4 is increased by 325%, the print speed is increased by....
  • 【Auto Leveling & Flexible CNC Platform】Out of the box,with a platform made of CNC mounting base-level and an 8.0mm ultra-flat aluminum plate,....
  • 【Removable Nozzle & Support Various Filament】With standard 240℃ extruder and high temp 265℃ extruder, Adventurer 4 shows great performance on....
  • 【HEPA13 Air Filter &1Kg Filament Spool Holder】Equipped with HEPA13 air filter that caneffectively eliminates 99% of TVOC powder, and activated....
  • 【HD Camera and & Resume Printing Function】Built-in HD camera.
  • watch printing progress in real-time. And Adventurer 4 can resume printing after....
Check Stock

AMOLEN 3D Printer Filament Marble PLA Filament 1.75mm Marble White 3D Printing Filament 1kg

  • MARBLE-LIKE FEEL - Special surface like marble, come along with marble’s natural and unique texture.
  • HIGH COMPATIBILITY - Perfectly compatible with most of the 3D Printer, 1.75mm marble pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • SMOOTHLY PRINT- Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.
  • PREMIER MATERIAL - Marble pla filament 1.75 raw materials are from USA, good performance.
  • HIGH PERFORMANCE - Good shaping, no bubble, no jamming, no warping.
Check Stock