Top High power Dc Power Supply

Sundown Audio Salt Series Monoblock Digital Class-D Amplifier (Salt-2 2000W Rms)

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

POWERBES DC Power Supply Variable 120V 3A - Adjustable Horizontal Switching Regulated Benchtop, Highly Portable, 3-Row & 4 Digits Display, Highly Accurate (0.01V - 0.001A), Testing Leads Included

  • 【Highly Accurate Encoder Adjustment】 Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs..
  • 【Output Switch Control】 In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency..
  • 【Automatic Power Calculation】 The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment..
  • 【Short Circuit Alarm】 When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage pr....
Check Stock

Tekpower TP5003T Variable DC Power Supply, Linear Output for Labs and Science Research, Power Cord and Alligator Included

  • 【Precise Encoder Adjustment Knob】The DC power supply has a precise encoder adjustment knob. Just press the knob to switch each digit, and then turn the knob to set each digit in the range of 0-9. Unlike ordinary knobs, the coding knob of this variable dc power supply allows you to set the settings you need more accurately..
  • 【3 Groups of Internal Memories】The variable dc power supply has three groups of storage functions M1-M3. You can store commonly used data using the three memories storage buttons M1-M3, and recall it for use at any time without repeated input. This is beneficial to your work efficiency and is more convenient and faster..
  • 【Output On/Off Button】The output on/off button makes it nice to be able to set your voltage and amps without power applied to the load. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency..
  • 【Short Circuit Alarm】When a short circuit occurs, the adjustable dc power supply will emit a buzzer alarm and stop output. At the same time protect the bench power supply and load from being damaged. In addition, the benchtop power supply has overvoltage, overcurrent and overheat protection..
Check Stock

DC Power Supply Variable, Bench Power Supply with Output Switch, Short Circuit Alarm, Adjustable Switching Regulated Power Supply 30V 10A with 4-Digits LED Power Display, USB Quick-Charge Interface

  • 【Highly Accurate Encoder Adjustment】 Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs..
  • 【Output Switch Control】 In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency..
  • 【Automatic Power Calculation】 The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment..
  • 【Short Circuit Alarm】 When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage pr....
Check Stock

Sundown Audio SAE-2000D V.3 Monoblock 2000W RMS Digital Class D Amplifier SAEv3-2000D

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with Memories, Output Switch, Adjustable Switching Regulated Power Supply with 4-Digits Display, Encoder Adjustment Knob

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, Therma....
Check Stock

B&K Precision 878B Dual Display Handheld Universal LCR Meter

  • Converts AC to DC: features AC to DC power supply Variable linear/ regulated design. Provides convenient and reliable AC-to-DC Power conversion W/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, ham radio, etc.
  • Usb and Screw-Type terminals: This workbench linear variable power supply features dual USB charge port and universal screw connection terminals compatible w/ a wide range of device/equipment. Used to test device/equipment operation and performance.
  • Plug-in operation: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source.
  • Short-circuit protection: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electronics. Has rugged and durable housing construction safe for benchtop or desktop Placement.
  • Amp gauge and volt meter display: this DC bench power supply is equipped with rotary control for the adjustable powe....
Check Stock

Kungber DC Power Supply Variable, 30V 5A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
Check Stock

Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 10A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, The....
Check Stock

Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • High Precision with 4-Digit and Power Display: Kungber 30V 10A lab DC benchtop power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This lab DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: many safety measures are adopt in Kungber lab DC power supply - Grounding wire, Leaka....
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with 4-Digits LED Display, USB Interface, Adjustable Regulated Switching Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button

  • 【High-precision encoder knob】Different from general knobs, this DC power supply has a precise encoder knob. You can press the knob to switch each digit, and then turn the knob to customize each digit in the range of 0-9. Set the voltage or current you want more accurately..
  • 【Output Enable/Disable Button】In the process of using the bench power supply, Output button can prevent us from forgetting to turn off the output and causing damage to the load. Just press this button to turn on or turn off the output of the power supply. This makes it more convenient for you to use the power supply..
  • 【Overcurrent Protection】When the OCP function is turned on, if the load equipment is short-circuited during operation, the adjustable power supply will automatically stop output and send a buzzer to alert the user. Protect the adjustable power supply and load from damage..
  • 【Precise 4-digit LED Display】The variable power supply with a high-definition 4-digit display, which can display three values of voltage, current and power at the same time. The data is accurate to 0.01V and 0.001A. The bright white digital display helps you to operate as usual in the dark, and you can adjust the brightness of the screen as needed..
  • 【Compact and Lightweight】The meas....
Check Stock

GOKKO GKB-55 Extra Large Guitar Pedal Boards with Isolated Power Supply and DI Box, Aluminum Alloy Guitar Pedalboard 25.6' x 12', Come with Mounting Tape and Carry Bag

  • 1.Pedal board at the size of 25.6 x 12 x 2.6 inch offers large space to hold up a bunch of guitar effects pedals..
  • 2.Made of high quality Aluminum Alloy, which is solid to hold and protect the pedals nicely and durable to use..
  • 3.The pedal board is equipped with a completely independent power supply, which is more convenient to use, eliminating the trouble of carrying an additional power supply..
  • 4.Guitar power supply Specification：10 Isolated, 8 port DC 9V, 1 port DC 12V, 1 port DC 18V..
  • 5.Package include：1 x Pedal board with power supply，1 x Carrying bag，1 x Bag shoulder Strap，2 pairs 60 inches (150cm) Pedalboard Velcro，1 x Power Adapter，1 x Polarity Reversal cable，10 x DC Power Cable..
Check Stock