Top High speed Steel Spiral fluted Handheld Reamer

Utoolmart Adjustable Hand Reamer 23-26mm High Speed Steel H8 Milling Cutter Tool 1pcs

• 【High-speed Steel Tool】- Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
• 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
• 【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
• 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
• 【Application】- Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

• Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
• Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
• Size Infor: Length of chucking reamer is 6.5 inch.
• Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
• Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.

2/0 Taper Pin Reamer Kit

• 1 - 2/0 Spiral Flute taper reamer (Bosnian made).
• 5 - 300 series Stainless steel 2/0 taper pins 3/4" long.

Drill America - DWRRTS1INCH 1\ High Speed Steel Taper Shank Straight Flute Chucking Reamer, DWR Series

• Durable: Made of premium high speed steel, with high hardness and good toughness, durable to use..
• 8 Sizes: 8 pieces HSS straight flute reamer, shank Diameter- 3/4/5/6/7/8/9/10mm..
• Cutting: With sharp cutting edge, the reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
• Application: Widely used for bore machining, installed in drilling machine, milling machine,and screw machines etc..
• 100% Satisfied Service: Enjoy a smooth & worry-free return service within a month. Any questions feel free to contact us, we will be here for you..

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

• Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
• Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
• Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
• Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
• Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..

.196\ Diameter Carbide Tipped Chucking Reamer, 56551960

• Chucking Reamer: Size: 4mm, 5mm, 6mm, 8mm, 10mm.
• tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
• Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
• Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
• Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
• How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.

Thread Taps Drill, Rust Resistance Spiral Combination Tap Better Chip Removal 7Pcs/Set for Drilling(#1)

• High Speed Steel: Titanium plating combination drill taps are made of high speed steel, which can ensure sharpness, fast execution and maintain strength and efficiency..
• Spiral Flute Design: This is a tap drill with a spiral flute design, which has a better chip removal effect..
• Processing: The tap can process wood, plastic, aluminum, tin alloy, Mg alloy, and the thickness of the workpiece is less than 5mm..
• Chamfer in One : Combination of hole tapping and chamfering, convenient operation, hand drill, bench drill, and hexagonal chuck tapping machine are optional..
• Improve Work Efficiency: The drill bit can quickly complete the work, which greatly saves processing steps and time costs, and improves work efficiency..

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

• [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
• [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
• [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
• [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
• [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..

DelitonGude Metric M5 Machine Screw Tap 10pcs 5% Cobalt Spiral Flute Drill Taps Metric M5 Thread Tapping Tool(M5)

• Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M5X0.8mm.
• Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly..
• Spiral Flute design, well chip removal, Easy tapping.With spiral flute taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency.
• because the chips are unobstructed, the chips will not be blocked in the narrow flutes..
• Strong Box package Included: 10Pcs Spiral flute Metric Taps.
• Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30..

7-Piece HSS Chucking Reamer Set, 1/8 Inch - 1/2 Inch

• Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
• tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
• Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
• Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
• Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
• How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56065, USA Made

Drill America Bridge (Construction) Reamer 1-1/8\ Magnetic Hex Shank Bridge Reamer