Top High temperature Brazing Alloys

Goss KA-725-M12P Welding and Brazing HVAC Torch Tool Kit with Stand for \MC\ Acetylene Tanks

  • ...ng regulator assure durability and reliability, pressure regulated for consistent performance even when tiled or momentarily inverted. adjustable flame control knob can easily sized flame for different applications.
  • Added 15% Silver into Phos-Copper brazing rods.A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The temperature at which it melts from a solid to a liquid is 1472°F..
  • Each 0.5 lb tube contains 19 sticks of 14" brazing rods. Significantly lower melting point:A solder rod with 15% silver added can be liquid phase temperature down to 1472°F. The melting temperature from solid to liquid is 1472°F..
  • Enhanced metallicity: The addition of silver will improve the metallic plasticity, increase the strength and strengthen the toughness of the metal in the welded joint. Wettability: The addition of silver will improve the wettability of the welded joint, thus allowing perfect filling of every gap..
Check Stock

20 Sticks BLUEFIRE JAgP-15 1/2 lb 15% Silver Phos Copper Brazing Alloys Welding Rods Industry BCuP-5 0.050\ x 1/8\ x 14\ equivalent to HARRIS STAY SILV 15 Professional Gas Soldering Torch Accessory

  • 15% Silver Bearing: USA AWS A5.8 Class: BCuP-5 brazing alloy rods. Contents: Silver (Ag) 14.5-15.5%.
  • Copper (Cu): Rest. For the best results, recommend to be use with Bluefire JFB-102S brazing flux..
  • Valued Pack: Each tube contains 20 sticks of 14" long brazing rods, total 0.5 (1/2) pound in weight (Minor weight difference might exist in each tube, which is normal). GREAT SAVING!.
  • Best Performances: Solidus Temperature: 1193°F / 645°C, Liquidus Temperature: 1472°F / 800°C, Recommended Joint Clearance: 0.002"/0.006.
Check Stock

Peterson #1 Blue Flux Coarse Powder 1 lb Can

  • For brazing and welding cast and malleable iron and steel.
  • For torch welding brass, bronze and copper.
Check Stock

Uniweld Type28-6 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 12″ and is ideal for HVAC/R brazing up to 6 inch copper tubing.
  • Type28 Tips fit United’s Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

Uniweld Type17-30 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 7 inches and is ideal for HVAC/R brazing up to 6 inch copper tubing in tight work space.
  • Type17 Tips fit United's Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

Uniweld Type17-15 Rosebud Heating Tip

  • Proudly Made in the USA and 100% Flame Tested.
  • Use with acetylene and oxygen to achieve temperatures up to 5600 degrees Fahrenheit.
  • Rosebud tips are your best choice for brazing, pre-heating, straightening, annealing, bending, forging, etc..
  • Overall length is 7 inches and is ideal for HVAC/R brazing up to 2-5/8 inch copper tubing in tight work space.
  • Type17 Tips fit United’s Part No. 71 and Part No. WH550 Welding Handles.
Check Stock

Hot Max 24000 Brazing Flux Powder 8-Ounce

  • For all types of steel, malleable and cast iron, galvanized metals, brass, and bronze.
  • This flux is used for flame brazing with either an oxy-acetylene or electric carbon arc torch.
  • Active Temperature Range: 1400 to 2200 F (760 to 1205 C).
  • Meets AWS A5.31-91 Type FB3J Standards as well as MIL-F-16136B, Types A and B Standards.
  • Brazing Flux Powder comes in 8-Ounce container, Made in the USA.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • 【No Flux Needed】No additional flux is needed. BLUEFIRE brazing coil can be used directly with propane torch, which will save you a lot of money on extra flux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
Check Stock

Bernzomatic NS3 Nickel-Silver Flux Coated Brazing/Welding Rods, 2-Piece

  • 2 pack, nickel silver brazing rod, 85,000 psi tensile strength, 1680 degree to 1750 degree working temperature.
  • Nickel-silver flux coated brazing/welding rods perfect for repairing bicycles, metal furniture, railings, and radiators.
  • Used in joining carbon and alloy steels as well as non-ferrous materials.
Check Stock

Hose Torch Kit, Propane/MAPP, 5 Ft Hose

  • 【Easy to use】A 3.6ft hose makes it easier to get the map gas torch head into tight places. Hose length of Mapp gas torch provides great reach when the hook is clipped to belts..
  • 【Multipurpose use】Flow control knob near torch head for adjustable flame efficiently.Portable Mapp gas torch suitable for soldering copper pipes, welding, brazing, HVAC, cooking and grill, snow melting, burning steak, heat shrinkage, etc..
  • 【Stable performance】 Auto trigger start igniter makes our hose torch head super fast to light flame for simple one-handed operation.Our Mapp gas torch fuel by Propane, MAPP, MAP-PRO cylinder with CGA600 interface..
  • 【Premium material】The torch head Solid brass regulator is Pressure-regulated, durable Mapp gas torch stainless steel nozzle that withstand high temperature for a hotter, more efficient swirl flame..
  • 【Includes】 Torch head handle | Hose with CGA600 regulator | 2 x o-ring | Instruction Manual | 1 x cylinder clip | 5 x brazing welding rods. Mapp gas torch provides 30-Day full refund and 1-Year Limited Service..
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

3M Cubitron II Fibre Disc 987C, 36+, 4-1/2 in x 7/8 in, Die 450E

  • 3M Precision-Shaped Grain maintains super-sharp points that cut exceptionally fast with less pressure.
  • Mineral runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes.
  • Reduces changeouts and downtime in robotic and pressure-assisted applications.
  • Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling.
  • Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys.
  • 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure.
  • PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes.
Check Stock