Top Highly Secure Drive

1/2 Inch Drive x 17 mm Deep 6-Point Socket

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 3.02 in., Socket End Diameter: 0.95 in., Drive End Diameter: 0.95 in., Socket Well Depth: 1.34 in..
Check Stock

1/2 Inch Drive x 22 mm Deep 6-Point Socket

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 3.02 in., Socket End Diameter: 1.18 in., Drive End Diameter: 1.18 in., Socket Well Depth: 1.34 in..
Check Stock

1/2 Inch Drive x 5/8 Inch Deep 6-Point Socket

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.97 in., Socket End Diameter: 1.88 in., Drive End Diameter: 1.46 in., Socket Well Depth: 0.95 in..
Check Stock

TEKTON 1/2 Inch Drive x 19 mm Hex Bit Socket | SHB23219

  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
  • Large, clear die-stamped size marking is easy to read and can’t wear off.
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Length: 2.2 in., Shaft Diameter: 0.75 in., Drive End Diameter: 1.3 in., Exposed Bit Length: 0.7 in..
Check Stock

TEKTON 1/2 Inch Drive x 34 mm 12-Point Socket | SHD22334

  • 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.78 in., Socket End Diameter: 1.74 in., Drive End Diameter: 1.42 in., Socket Well Depth: 0.87 in..
Check Stock

TEKTON 3/8 Inch Drive x 24 mm 6-Point Socket | SHD12124

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.19 in., Socket End Diameter: 1.26 in., Drive End Diameter: 1.26 in., Socket Well Depth: 0.6 in..
Check Stock

TEKTON 1/2 Inch Drive x 33 mm 6-Point Socket - SHD22133

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.78 in., Socket End Diameter: 1.74 in., Drive End Diameter: 1.42 in., Socket Well Depth: 0.87 in..
Check Stock

TEKTON 1/2 Inch Drive x T60 Torx Bit Socket | SHB24260

  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • Star-shaped Torx bit has 6-lobes machined to precise tolerances for an exact, high-torque fit that resists camming out.
  • Large, clear die-stamped size marking is easy to read and can’t wear off.
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Length: 2.2 in., Shaft Diameter: 0.47 in., Drive End Diameter: 1 in., Exposed Bit Length: 0.7 in..
Check Stock

TEKTON 3/8 Inch Drive x 19 mm Deep 6-Point Socket | SHD13119

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 2.49 in., Socket End Diameter: 1.01 in., Drive End Diameter: 1.01 in., Socket Well Depth: 0.99 in..
Check Stock

TEKTON 3/8 Inch Drive x 22 mm Deep 6-Point Socket | SHD13122

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 2.49 in., Socket End Diameter: 1.17 in., Drive End Diameter: 1.17 in., Socket Well Depth: 1.03 in..
Check Stock

TEKTON 3/4 Inch Drive x 2 Inch 6-Point Socket | SHD32051

  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry applies force to flat sides of fasteners and not the corners, preventing round-off.
  • Extra large die-stamped size marking is easy to read and can’t wear off.
  • Detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
  • Polished, chrome-plated finish is easy to clean and highly resistant to corrosion.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fastener.
  • Overall Socket Length: 2.8 in., Socket End Diameter: 2.67 in., Drive End Diameter: 1.89 in., Socket Well Depth: 1.38 in..
Check Stock

Capri Tools Deep Impact Socket, 3/8-Inch Drive, 6-Point, Metric (24 mm)

  • 6-point socket opening provides an ideal, exact fit for hex-shaped fastener heads.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Standard-length socket is relatively versatile and suitable for a wide range of applications.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Socket Length: 1.58 in., Socket End Diameter: 1.3 in., Drive End Diameter: 1.19 in., Socket Well Depth: 0.67 in..
Check Stock