Top Hinge Installation Jig

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

Trend H CK Hinge Jig Skeleton & C Corner Chisel & C019AX1/4TC Cutter Pack

  • INCLUDES: H/JIG/C Hinge Jig Skeleton Two Part In Case plus C/Chisel Corner Chisel and C019AX1/4TC Cutter in one pack.
  • USE: The two part Contractor Hinge Jig is a portable fully adjustable block template set designed for recessing hinges in wooden doors & frames using....
  • USE: The Corner Chisel allows a rounded recess in wood to be cut to a square recess with the use of a hammer. It's ideal for squaring hinge recesses....
  • USE: The cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. For use on softwoods,....
  • VALUE: Three seperate products in one handy pack.
Check Stock

Hinge Drilling Jig 35MM Forstner Bit Woodworking Tool Drill Bits Hole Boring Jig Cup Style Concealed Hinge Jig Drill Guide Set Door Hole Template for Kreg System

  • PREMIUM MATERIAL & FAST DELIVERYThe hinge Jig drilling is made of high quality engineering plastic, which are durable.Shipped from US, you will....
  • CONVENIENT TO USEThis is a set of drill guide tool used for convenient hinge hole drilling.With this drill guide, you can drill hinge holes....
  • EASY TO USESimple to use with any drill - no special tools needed.
  • adjustable cams ensure proper hinge offset.
  • ACCURATE HOLE POSITIONHole position is accurate, no need to draw lines, suitable for 35mm hinge.
  • PRACTICAL TOOLThe Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges, it is a practical tool.
Check Stock

Adoles 35mm Concealed Door Hinge Jig， Accurate Locking Cabinet Hinge Jig， Aluminum Alloy Material Comes With Clamping Device For Easy Carrying And Use.

  • 【Premium Aluminum Alloy Material】The 35mm concealed hinge jig is made of high-quality aluminum alloy material, This is a set of guide tools for installing concealed hinges very accurate..
  • 【Adjustable Double Cleat Design】Adjustable double clamping plate for accurate positioning, clamping 15-25mm thickness of wood panels, convenient for fast multi-angle drilling, and installation of cabinet door hinges..
  • 【Focus On Practicality】Suitable for most 35mm cabinet hinge jig clamps, with an adjustable opening depth of 10-15mm and adjustable drilling edge distance of 3-7mm..
  • 【Upgrade Three Bearing Drill Sleeve】Upper, middle, and lower 3 bearing drill sleeve, the total height of drill sleeve 2cm, the small swinging amplitude of drill bit for accurate hole opening..
  • 【Perfect Choice】Easy to use with any drill, you don’t have to be a well-equipped woodworker to install these hinges. Perfect for any handyman who needs hinges made..
Check Stock

35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter.(Yellow)

  • Yellow 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter..
  • Made of engineering plastic, This is a set of guide tool for installing concealed hinges very accurate..
  • This punch temporarily supports 46-47-48-52 mounting screw holes..
  • The hinge opening is suitable for 35mm hinges..
  • Make cabinet door installation easy. Get drill press accuracy with any hand drill..
Check Stock

14-Piece Cabinet Hardware Jig Tool Set, Fingwerk Aluminum Alloy Cabinet Handle Template Jig Tool of Drawer Front Knobs, Handles and Pulls, Door

  • ...Use】 Cabinet hardware jig tool set can be used on any cabinet door style, door handles, and recessed drawer fronts. Multi-functional design can even quickly drill pin holes on shelves and install hinge plates in assembled or unassembled cabinets..
  • 【Great Service】The cabinet handle jig tool set with the fastest installation speed and the most accessories on the market. You will get a great box of tools for a favorable price. Fingwerk offers 120 days return and free replacement if your cabinet handle jig meets any quality problem. Order it with no worries!.
Check Stock

Kipokalor 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter (Blue)

  • Blue 35mm Concealed Hinge Jig Boring Hole Drill Guide Cutter Bit Set Door Boring Hole Template and Bit for Cabinet Door Installation for Tool Carpenter..
  • Made of engineering plastic, This is a set of guide tool for installing concealed hinges very accurate..
  • This punch temporarily supports 46-47-48-52 mounting screw holes..
  • The hinge opening is suitable for 35mm hinges. Make cabinet door installation easy. Get drill press accuracy with any hand drill..
Check Stock

Woodhaven 8536 3-1/2 Hinge Jig 5/8 Radius

  • Fastest, easiest, least expensive and most accurate way to cut a hinge mortise. Clamps to work so there's no nail holes or other unsightly blemishes.....
  • Made of 10mm (.393”) thick phenolic for heavy duty use, measures 5-5/8" x 7-5/8"..
  • Uses a bearing guided bit (our 8500 - sold separetly), or bushing & bit combination (5030K & 13416 - sold separately), to follow the jig for perfect....
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

King&Charles Cabinet Hardware Jig, Cabinet Handle Jig, Cabinet Hardware Template Tool, Drawer Pull Jig - Cabinet Jig for Handles and Pulls

  • ... small holes. It is a more ingenious way..
  • ⭐【Time Saver Quick Drilling】- Cabinet hardware template tool a full day of measuring and re-measuring. Set it up once and use it repeatedly with no further measurements, A good accessory, and helper for woodwork or DIY..
  • ⭐【Detachable & Portable】- Cabinet hardware installation template quick-release ” drill guide” sliders can be split into small parts by taking a small Space to easily carry. The storage bag we present will solve all your troubles of carrying..
  • ⭐【Jig Widely Application】- Cabinet hardware jig is ideal for installing kitchen drawers, cabinets, door handles and drawer fronts, Hinge, Or Shelf. Works on any cabinet door stile and rails including shaker doors & recessed drawer fronts..
Check Stock

Kreg Tool Company - Kreg KHI-SLIDE Installation Jig Drawer Slide Jig and Kreg KHC-PREMIUM Face Clamp (2 Pack)

  • ...Time Saver Quick Drilling】- Cabinet hardware template tool a full day of measuring and re-measuring. Set it up once and use it repeatedly with no further measurements, A good accessory, and helper for woodwork or DIY..
  • ⭐【Detachable & Portable】- Cabinet hardware installation template quick-release '' drill guide'' sliders can be split into small parts by taking a small Space to easily carry. The storage bag we present will solve all your troubles of carrying..
  • ⭐【Jig Widely Application】- Cabinet hardware jig is ideal for installing kitchen drawers, cabinets, door handles and drawer fronts, Hinge, Or Shelf. Works on any cabinet door stile and rails including shaker doors & recessed drawer fronts..
Check Stock

Neitra Cabinet Hardware Jig, Adjustable Drill Guide for Accurate Installation of Door and Drawer Front Handles and Knobs Punch Locator Wood Drilling Doweling Templates Jig Tool

  • ... ALL BUSHINGS ARE REPLACEABLE(EXCLUSIVE PATENT), extend service life extremely. Unlike cheap plastic components that break or quickly wear out, our Adjustable Drill Guide are sturdy and tough, laser engraved rulers won’t fade with time.
  • FAST AND SIMPLE TO USE: 10X faster installations, Easy to setup for any length and it provides repeatability: if you have done the left door, just flip it over and it’s already easy setup for the right door. This wood drilling template tool prevents costly mistakes and ensure perfect installation of hardware every time. This hardware jig tool is a large time saver in any case.
  • UNMATCHED VERSATILITY: Punch Locator is perfectly works on any cabinet door handles, cabinet pulls, knobs, hinge plates. The edges of all rulers and sliding drill guides are upgraded by chamfer, more smooth, protect your hands and furniture surface, no scratch.
  • GREAT SERVICE: Neitra offers 120 days return and free replacement if your cabinet handle jig meets any quality problem. Order it with no worries!.
Check Stock

Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3” to 5” Length and 1/4” or 5/8” Thickness.

  • 【Intergrated Door Hinge Mortiser.】 Thanks to two removable plastic inserts, our door hinge installation kit is a fantastic accessory to have on hand for cutting and installing door hinges of round or sqaure corner hinges. This jig allows you to cut professional looking mortises in the doors of hinge from 3” to 5“ length and 1/4” and 5/8“ thickness. (Template Size: 7.8” L×3.5”W×2”H.).
  • 【Easy to Install and Use.】The hinge router template can be adjusted for both hinge length, thickness, and round vs. square corners. Also, it has a built-in depth gauge on the side for the attached router bit to set depth and comes with a self-centering hinge bit to ensure hinges screws are perfect. The corner pieces for routing different radius hinges work well too..
  • 【No Need for a Hammer and Chisel.】You just need to use this hinge template and a router or compact router to install your door hinge.(Router not included) Located on outer wall of routing area, just set the depth by using the router bit depth gauge and cut out the door hinge shape from template area.(Thin hinges: 3”,3-1/2”.4” on the left and thick hinges: 4-1/2”,5” on the right.) Definitely better and faster than using a Chisel..
  • 【Durable and Reliable Structure.】Made of....
Check Stock