Top Hitch Lockable Tightener

NIXFACE 2 Heavy Duty Hitch Coupling Clamp - Anti Rattle Device Tightener Receiver

  • Trailer hitch clamp Materials:Heavy duty steel..
  • Package Include:1 set of 2" Heavy Duty Hitch Coupling Clamp(Screws included)..
  • Vehicle Fitment:Hitch Tightener fit for 2" receivers.Designed for use with almost all hitch mounted bike racks and cargo carriers..
  • Hitch Clamp was designed to eliminates the hitch wobble at the junction of your bike rack / utility carrier / trailer hitch and your hitch receiver..
  • Easy to Install:Simple design,simple to use..
Check Stock

RETRUE Hitch Tightener, Hitch Stabilizer Heavy Duty Anti-Rattle Clamp for 1.25" and 2" Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free

  • Premium Quality. RETRUE hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Practical and Functional. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • Utility Use. This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Hitch Tightener Installation. After insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • From RETRUE your reliable partner, model HT001. If you encounter any problems, please feel free to contact us through the "Ask a Question&q....
Check Stock

WEIZE Hitch Bike Rack Wobble Free Smart Tilting Bicycle Car Racks for Standard Fat Tire and E-Bike 2-Bike 120 lbs Capacity 2-inch Receiver

  • ...structed with reinforced steel which makes it durable and powerful enough to carry 2 bikes weighing 60 lbs each. Besides, compare with roof rack, the hitch mount bike rack can save your cost of fuel up to 30% by reducing wind resistance..
  • ANTI-SCRATCH: The trailer hitch bike rack features foam-padded clamp and hitch tightener to prevent the bicycle from swaying and damaging your car's paintwork..
  • CONVENIENT: Our bicycle car rack is non-foldable, but the tilting function allows for access to the back of your vehicle even when loaded with bikes(NOT suitable for swing-out tailgate), the removable platform can be adjusted for 1 or 2 bikes carrying..
  • HIGH COMPATIBILITY: Fit 17-29 inch wheels, up to 63-1/3 inch wheelbase, up to 5 inch tires, 2 inch receiver, it is also equipped with safety strap, security hitch lock, hitch tightener and other necessary hardwares, please contact us if there are something missing, we will re-send it to you for free..
  • WARRANTY: 1-Year free-return gurantee for any product quality problems. WEIZE tow hitch bike rack aims for quality followed up with quality customer service directly provided by manufacturer. A satisfied solution will be given for ANY of your problems. Our support team is on standby for YOU..
Check Stock

TEMCo Universal 2 Trailer Hitch Step - Keep Your Trailer Hitch Installed

  • The ONLY hitch step that works with your 2" trailer hitch.
  • TEMCo's TA2520 Hitch Step fits AROUND most trailer hitches and allows you to have a hitch step while pulling a trailer..
  • Super sturdy: built-in tightener prevents all rattling or wobbling.
  • All welded steel design, durable powder coat finish, custom traction dimple pattern.
Check Stock

WEIZE Hitch Bike Rack, Wobble Free Smart Tilting Folding Bicycle Car Racks for Standard, Fat Tire and Electric Bike, 2-Bike 120 lbs Capacity, 2-inch Receiver

  • ...t durable and powerful enough to carry 2 bikes weighing 60 lbs each. Besides, compare with roof rack, the hitch mount bike rack can save your cost of fuel up to 30% by reducing wind resistance..
  • ANTI-SCRATCH: The trailer hitch bike rack features foam-padded clamp and hitch tightener to prevent the bicycle from swaying and damaging your car's paintwork..
  • CONVENIENT DESIGN: Our bicycle car rack is versatile, the tilting function allows for access to the back of your vehicle even when loaded with bikes(NOT suitable for swing-out tailgate), the removable platform can be adjusted for 1 or 2 bikes carrying, the folding design also makes the rack to be folded up when not in use..
  • HIGH COMPATIBILITY: Fit 17-29 inch wheels, up to 63-1/3 inch wheelbase, up to 5 inch tires, 2 inch receiver, it is also equipped with safety strap, security hitch lock, hitch tightener and other necessary hardwares, please contact us if there are something missing, we will re-send it to you for free..
  • WARRANTY: 1-Year free-return gurantee for any product quality problems. WEIZE tow hitch bike rack aims for q....
Check Stock

Reese 30156 Rail Kit Mounting Adapter , Black

  • ✔️ Anti-Rattle Hitch reducing noise so you can enjoy your drive.
  • ✔️ Tow Hitch Accessories are a great cheap fix to enhance your driving experience whilst using cargo carriers, hitch receivers, trailer ball mounts, bike racks, hitch racks and more.
  • ✔️ This Trailer Hitch Stabilizer is the perfect silencer device for a smooth and comfortable journey.
  • ✔️ This secure non rattle tightener will fit hitchs on trucks, suv's, vans, RV's and trailers.
  • ✔️ Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on hitches larger than 2 Inches).
Check Stock

Towever 84332P Trailer 2 inches Hitch Extension Receiver Tube Extenders 7 inches Length with Hitch Pin and Clips

  • 2inch trailer hitch extension for class 3 or 4 hitch receiver.
  • Fits into 2" hitch receiver and 2" outside, Extends to 7", perfect accessories for hitch mount bike rack to clear spare tire.
  • Capacity: 5000 lbs GTW / 500 lbs TW , for most bike rack and cargo carrierrs, Hitch tightener( towever 84701) are highly recommeded for tight fit and....
  • Together wiith 5/8 inches Hitch Pin Kits For use.
Check Stock

Stowaway Hitch Mount SwingAway Frame

  • Swings out up to 180 degrees for clear access to the rear of your vehicle.
  • Ideal platform for your hitch box, rack or grill with four bolt mounting and 250 lb capacity.
  • Dual safeties to prevent accidental release while on the road.
  • Heavy duty tube/bar construction is guaranteed for ten years.
  • 2" hitch models are available. Each includes frame and hitch tightener..
Check Stock

AUMOWE 7 Inch Extension Trailer Hitch Extender Fit 2 Inch Receiver, 3500lbs, with Pin & Clip

  • 7 INCH EXTENSION. This Extender provides up to 12 inch clearance for a trailer and hitch mount accessaries..
  • 2 INCH RECEIVER FIT. Fits 2 inch square receiver Opening, class III 2 inch receiver hitch with collar, can be use with hitch tightener.
  • 350 LBS CAPACITY. 3500 lbs GTW / 350lbs TW, for most bike rack and cargo carriers, Do NOT use for towing purposes.
  • EASY INSTALL. Simply and quick insert the shank into your hitch receiver and assemble the hitch pin and clip (include in package). And hitch up your trailer or hitch accessory.
  • CORROSION PROOF. Finished in black podwer coating provide durable and strong conditions, resist dust and corrosion, adds extra durability.
Check Stock

Zone Tech Trailer Hitch Receiver Tube Extender (1 Pack)

  • ► CONVENIENT - The Zone Tech hitch tube extender provides added clearance for a trailer or hitch-mounted accessory. Extends to 7", ideal embellishments for hitch mount bicycle rack to clear extra tire..
  • ► CAPACITY - The Zone Tech hitch tube extender has a capacity of 3500 lbs GTW / 350lbs TW, for most bike rack and cargo carriers..
  • ► PREMIUM QUALITY - The Zone Tech hitch tube extender is made durable high quality heavy solid steel through mechanically welded for predominant quality. With top notch equipment fittings and finished in dark powder coating for more durable conditions and free from dust and corrosion..
  • ► SAFE - The Zone Tech hitch tube extender is guaranteed safe as long as you stay within th limits specified. Hitch tightener are highly suggested for tight fit and noise reduce..
  • ► EASY INSTALLATION - The Zone Tech hitch tube extender are simply receiver tubes that is inserted into your trailer hitch to add a certain amount of clearance for your vehicle's bumper or spare tire mounted on the back..
Check Stock

Vehiclex Anti Rattle Hitch Tightener for 1.25\ and 2\ Hitch Receivers – 0.44\ U-Bolt Diameter – Protective Anti-Rust Coating

  • A TIGHT AND SILENT HITCHING. Stabilizes hitch mount, preventing its rattling and wobbling..
  • PROTECTIVE COATING. Rubber-coated U-bolt and powder-coated tightener plate reduce the risk of scratches, chipping, and corrosion in any weather..
  • FITS THE MOST COMMON HITCH SIZES. Tightens any brand hitches I, II, III, and IV classes for 1 1/4" and 2" receivers..
  • EASY INSTALLATION on bike racks and hitches for cars, crossovers, trailers, vans, SUVs, and trucks..
  • THE SET COMES WITH 0.44" U-bolt, 0.31" tightener plate, 2 lock and 2 flat washers and 2 nuts..
Check Stock

WAVESRX Boat Trailer Hitch Tightener & Stabilizer | Stainless Steel Anti-Rattle Clamp for 2\ Hitch Receivers | Marine Grade, Rust-Free, Long-Lasting U-Bolt for Safe Transportation of Your Watercraft

  • ...ONDITIONS - Most hitch clamps out there are designed for universal use and perform poorly in harsh marine conditions that boat trailers are often subjected to. How often did you find yourself struggling to remove a steel nut that has been seized by salt and corrosion? We certainly had, so when we designed our hitch tightener for boat trailers, we used 316 Marine Grade Stainless Steel U-bolt, nuts and washers, to ensure Corrosion-Free & Rattle-Free Towing..
  • UNIVERSAL FIT AND EASY INSTALLATION - If your vehicle has a 1.25" (32 mm) or 2" (50 mm) hitch for towing a Boat or a Jet Ski, you can Quickly and Effectively secure it using our Premium Hitch Tightener Clamp. Just place the black tension plate on the bottom with the angled lip pointing up and away from your vehicle, insert the U-Bold from the top over the towing hitch and secure it from the bottom using the included washers and nuts (see product images for recommended installation position)..
  • FREE BUNDLED EXTRAS & BONUS FEATURES - When it comes to product value, we don't believe in cutting corners by eliminating essential features or components. That's why included in the box you'll find a Rubber Coated Stainless Steel U-Bolt (for complete weather and scratch protection), a Reinforced Bottom Plate (f....
Check Stock