Top Hoffman Flush Mount Enclosure 2

Algo 8028 SIP Door Phone / IP Intercom

  • Single pair 24 AWG wiring up to 1,000 Ft (300 m) between door station and controller for easy new or retrofit installations.
  • Flush or surface mount (i.e., dual gang) weather-resistant enclosure.
  • Choose Stainless Steel or Brass Faceplate.
  • Configure device settings via Web Interface.
  • SIP compatibility with all leading UC vendors including: Avaya, Broadsoft, Cisco, Digium/Asterisk, Mitel, Metaswitch, NEC, and Polycom and most others.
Check Stock

KICKER 46CWTB104 10' Subwoofer In Enclosure+(2) 8' Tower Speakers RZR/ATV/UTV

  • Package Includes: (1) Kicker 46CWTB104 TB 10″ 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. (1)Pair RockvilIe RWB90B Black 8″ 300w Marine Wakeboard 360 Swivel Tower Speakers. What’s in the Box: 1 x enclosure assembly. 2 x vertical mounting brackets. 1 x horizontal mount base. 1 x Horizontal mount hook(retainer). 1 x Horizontal mount plate(retaining clamp). 7 x stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure.
  • 11 x nylon flat washers (to be used on all mounting fasteners). 4 x stainless steel pan head phillips M4 x 25mm (for mount base to vehicle). 1 x owners manual. 2 x Kicker stickers. KICKER 46CWTB104 TB 10″ 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. Four Ohm Speaker. Thick ABS Tube Construction. Flexible Horizontal or Vertical Mounting System. Spring-Loaded Speaker Terminals. CompR Woofer and Reflex Sub. Ceramic Magnet. Advanced Heat Management System.
  • Best prices – We sell all Kicker products at great prices. Full Factory Warranty. Lifetime Customer Service by Kicker product experts. Guaranteed legitimate and authentic merchandise. Includes: (2) Wakeboard Speakers. (2) 360 Swivel Mounting Brackets. Integrated Grill. Installation Hardware. Descriptio....
Check Stock

Kapitel 12

  • SDR Series 12-inch Dual 4-ohm loaded Subwoofer Enclosure.
  • Peak Power: 2,400 Watts | RMS power: 1,200 Watts.
  • Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation.
  • Custom Vented Enclosure Made of High Strength 5/8" MDF and Finished in Premium Black Carpeting.
  • Double Front Baffle (1.25") with Countersunk subwoofer design for Flush and Attractive Appearance.
  • Ported Enclosure Tuned at 32 Hz for Deep and Accurate Bass.
Check Stock

Infratech Flush Mount Heater Frames 61.25\ Length, Stainless Steel

  • Infratech flush mount frames are stylish and versatile, allowing a seamless look for your heater that vanishes into the décor of a space..
  • Flush mount frames are available in a variety of sizes and colors to match your Infratech W, WD, C, CD-Series heater..
  • Frames require a flat ceiling and minimum 2” x 8” studs, where the heater can face straight down when recessed. Avoid flush mounting the heater close to a ceiling fan or light fixture..
  • You will need to hire a licensed contractor in order to complete a flush mount installation..
  • WARNING: Frame and heaters cannot be mounted on a sloped/ pitched ceiling. Flush Mount applications must always be installed on a flat, non-sloped ceiling..
Check Stock

KICKER 46CWTB102 TB 10\ 800w Marine Loaded Subwoofer EnclosurewithPassive Radiator Bundle with Pair Rockville RWB90B Black 8\ 300w Marine Wakeboard 360 Swivel Tower Speakers

  • Package Includes: (1) Kicker 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. (1)Pair RockvilIe RWB90B Black 8" 300w Marine Wakeboard 360 Swivel Tower Speakers. What's in the Box: 1 x enclosure assembly. 2 x vertical mounting brackets. 1 x horizontal mount base. 1 x Horizontal mount hook(retainer). 1 x Horizontal mount plate(retaining clamp). 7 x stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure.
  • 11 x nylon flat washers (to be used on all mounting fasteners). 4 x stainless steel pan head phillips M4 x 25mm (for mount base to vehicle). 1 x owners manual. 2 x Kicker stickers. KICKER 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. Two Ohm Speaker. Thick ABS Tube Construction. Flexible Horizontal or Vertical Mounting System. Spring-Loaded Speaker Terminals. CompR Woofer and Reflex Sub. Ceramic Magnet. Advanced Heat Management System. Signature Double Red Stitching.
  • Full Factory Warranty. Lifetime Customer Service by Kicker product experts. Guaranteed legitimate and authentic merchandise. Includes: (2) Wakeboard Speakers. (2) 360 Swivel Mounting Brackets. Integrated Grill. Installation Hardware. Description:.
Check Stock

2 Pack Universal Side Mount Toilet Handle Angle-Mount Adjustable Trip Lever Tank Flush Lever Replacement Handle with 2 Pieces Stainless Steel Flapper Chains for Most Side Mount Toilets-Chrome Finish

  • 1.【Side Mount Brass Toilet Tank Lever】This toilet tank lever handle is compatible with most common toilets with a side mount or angle mount flush lever. Three holes at the end of the lever, which make it flexible to adjust the length according your toilet tank..
  • 2.【Size Details】The flush handle lever measures about 8 inch/20cm in length, and 2.56 inch/ 6.5cm in width. Proper size for most Side-mount and Angle-mount flush toilets. Fits tank hole diameter 0.62 in. to 0.67 in..
  • 3.【High-quality Brass Material and Corrosion Resistant Finish】Made of brass for enhanced durability. Replace your toilet handle with this universal flush lever. This lever comes in a classic chrome finish to compliment your toilet..
  • 4.【Easy to Install】It's easy to install and includes the chrome finish handle, aluminum arm, white plastic spud and nut. Passes 50,000 times flush test. Fits standard front mount..
  • 5.【Fit for Most Common but Not All Toilet Tank】Note that side-mount toilet handles type is fit for most toilet tank, but does not mean that will fit for any side-mount or angel-mount handle. When replacing a side-mount or angle mount handle, measure the lever before place the order..
Check Stock

Kicker 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure Bundle with Rockville DBM12 2000w Mono Amplifier w/Covers+Bass Remote & Rockville RMWK4 Amplifier Install Wire Kit (3 Items)

  • Package Includes: (1) Kicker 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. (1) RockvilIe DBM12 2000w 2 Ohm Marine/Boat Mono Amplifier Amp w/Covers+Bass Remote. (1)RockvilIe RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. What's in the Box: 1 x enclosure assembly. 2 x vertical mounting brackets. 1 x horizontal mount base. 1 x Horizontal mount hook(retainer). 1 x Horizontal mount plate(retaining clamp).
  • 7 x stainless steel M5 x 12mm button head screws for horizontal mount plate to base and mounting brackets to enclosure. 11 x nylon flat washers (to be used on all mounting fasteners). 4 x stainless steel pan head phillips M4 x 25mm (for mount base to vehicle). 1 x owners manual. 2 x Kicker stickers. KICKER 46CWTB102 TB 10" 800w Marine Loaded Subwoofer Enclosure+Passive Radiator. Two Ohm Speaker. Thick ABS Tube Construction. Flexible Horizontal or Vertical Mounting System.
  • Spring-Loaded Speaker Terminals. CompR Woofer and Reflex Sub. Ceramic Magnet. Advanced Heat Management System. Signature Double Red Stitching. Grilles included. Dimension (L x W x H): 3 inch x 3 inch x 3 inch. Weight: 30 lbs. Type: Reflex.....
Check Stock

RV Trailer Camper Nr751 Ac/Dc Refrigerator 2.7Cf Black NORCOLD NR751BB

  • Single Compartment Refrigerator With Freezer.
  • Proud Mount/ Flush Mount Without Additional Hardware.
  • 18-1/2 Inch Width x 21-1/16 Inch Depth(Proud Mount) 23.19 Inch Depth(Flush Mount) x 20-1/2 Inch Height.
  • 0.37 Amps At 230 Volt AC/ 0.7 Amps At 120 Volt AC/ 2.5 Amps At 12 Volt DC/ 3 Amps At 12 Volt DC/ 1.3 Amps At 24 Volt DC/ 1.5 Amps At 24 Volt DC.
  • 2-Way Alternating Current/ Direct Current.
  • Danfoss Compressor Improves Performance, Especially At Higher Ambient Temperatures.
  • Improved Styling - New Hidden Ventilation Grill.
  • Can Be Flush Or Proud Mounted Without Additional Hardware.
Check Stock

JBL Club 622 - 6.5\

  • JBL Patented Pluse One Glass Fiber Woofers with Rubber Surrounds.
  • Included components: 2 x Tweeters 2 x Flush-mount cups 2 x Threaded flush-mount adapters 2 x Plastic locking nuts 2 x Surface-mount cups 2 x Starfish tweeter mounts 2 xWashers 8 x Screws.
Check Stock

KICKER 2 43CVT102 COMPVT 10" 1600w Shallow Car Subwoofers+Mono Amplifier+Amp Kit

  • Shallow-mount subwoofer with true high-performance This sub is slim enough to be mounted in virtually any vehicle Delivers extreme bass with minimum depth Four-layer voice coil for max power handling Dark gray modified-spoke cone with bracing for clear bass response Ventless solid-pole design for direct mount to enclosure rear wall Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth Injection molded SoloKon cone Ribbed Santoprene surround High-temp coil wire Slender,.
  • strong steel basket with coil-cooling perimeter venting, Durable Spiralead tinsel leads Stitched surround for enhanced cone-to-surround strength Tough double-stitched surround Special spring-loaded binding posts for minimizing depth UniPlate system redirects heat away from motor structure Stamped Steel Basket Push Pin Terminals Top-mount depth : 4-1/4" Cutout diameter : 9-3/16" Frequency Response : 25 - 500Hz Sensitivity : 87.2 dB Minimum Sealed Enclosure : 0.8 cu. ft. Maximum Sealed Enclosure : 3 cu. ft. Minimum Ported Enclosure : 1.25 cu. ft. Maximum Ported Enclosure : 1.75 cu. ft. Subwoofer Design : Round / Circle.
Check Stock

Siemens MC2040B1200F 20 Space 40 Circuit 200-Amp Flush Mount Meter Load Center Combination with Ring Type Cover

  • Suitable for use only as service entrance equipment.
  • Contact local utility to confirm meter socket approval.
Check Stock

Pyle Ceiling Speakers - Stereo Home Theater Speakers - in Wall Speakers Flush Mount - 8-Inch White 250 Watt, 2-Way, (Pair) (PDIC86)

  • 2-WAY MOUNT SPEAKER: The pair of 8.0” full range stereo sound speaker has two way of installation: in-wall or in-ceiling flush mount. It has convenient spring-loaded clips for easy installation perfect for custom installations and applications.
  • FLUSH MOUNT DESIGN: A pair of flush mount design midbass speaker for simple and easy in-wall / in-ceiling installation. The product includes the cutout dimension at 9.4'' in diameter x 3.6'' in depth and environmentally friendly ABS construction.
  • 40Hz - 20kHz FREQUENCY RESPONSE: Pyle 8.0” speaker system has a 1/2’’ polymer tweeter and frequency response. This flush mount speaker is pack with exceptional 8 ohm impedance rating and impressive 250 watts power handling capability.
  • 250 WATTS PEAK: Pyle in-wall speaker system were carefully combined to reproduce sound clearly with outstanding responsiveness. It can achieve wide-ranged sound performance speakers secure as well as extending the life of the product.
  • ELECTRONIC CROSSOVER NETWORK: Pyle ceiling speakers is built in with electronic crossover network and excellent 89dB sensitivity that place these speaker in a class of their own. The product includes changeable round and square stain resistant grills.
Check Stock