Top Holder Bracket Mount

Wyze Cam Pan Mounting Kit, 15 Foot Micro USB Cable Included

  • COMPATIBILITY: Wall Mount for Wyze Cam V3 & Wyze Cam V2 & Wyze Cam Spotlight, provides better viewing angle for Wyze Cam camera. Note: Wyze Camera is not included, bracket not included..
  • TWO INSTALLATION METHODS: The Wyze wall holder can be installed with 3M stick on or wall screws. It is very easy to install with 3M tape strong adhesive, no tools needed, no messy, no drilling. Another installation methods-wall screws holder are installed more firmly and the wall can be used wider range..
  • PLUG-IN DESIGN: The wall holder adopts a plug-in design, which is easier to install and not damage the camera. The Wyze camera only needs to be inserted into the bracket, no screws, no mess install, and will not affect the 360 -degree rotation of the camera..
  • SPECIAL DESIGN: The Wyze Cam V3 mount is designed with a slider auxiliary board. When the auxiliary board is removed, it is the Wyze Cam V2 bracket, providing a suitable choice for your Wyze Cam Camera..
  • Wide Applicability: The Wyze Camera bracket can be installed on glass, wall, cabinet, ceiling and any other place, including paint, outdoor, etc. Note: 3M tape cannot be installed on dirty, uneven and flat surfaces with water..
Check Stock

GPS Mount, APPS2Car Upgraded 13.5-Inch Gooseneck Suction Cup GPS Mount for Truck/Van/Car, Windshield Dashboard GPS Holder for Garmin Dezl Drive Nuvi Zumo DriveSmart DriveassistRV StreetPilot

  • *Please Note *- This GPS ball mount is not compatible with RV 890.
  • EXTRA LONG GOOSENECK ARM - The aluminum long arm can bend up to 13.5 inches for various visual angles to your liking, making it easy to mount the GPS on the windshield or dashboard without blocking the field of view especially when you drive a truck, semi-truck, or van.
  • SUPER STICKY SUCTION CUP - Featuring a layer of super sticky gel and locking lever for steady hold, the GPS dash mount will not come undone or slip off.
  • You can effortlessly mount it on most flat surfaces, such as dashboard, table, wall, windshield, and window.
  • ANTI-VIBRATION STABILIZER - With the extra hold of the anti-shake stabilizer, the strong sticky suction cup ball mount can securely hold the GPS navigator in its position without vibrating around even on a bumpy road.
  • REPLACEMENT GPS HOLDER - An alternative to gps cd slot mount holder, gps air vent mount holder, gps friction beanbag mount holder and gps dash pad (NB: Mounting bracket is not included).
  • WIDE COMPATIBILITY - Fit for Garmin Dezl 550 560 570 580 660 680 760 770 780 785 790(LM LMT LMT-S LMTHD), Drivesmart 50 51 60 61 70 71(LMT NA LMT-S LMTHD), Driveassist 50 51 60 61 (LMT LMT-S LMT-D LMTHD NA), NuviCam LMTHD, RV 660 760 7....
Check Stock

Mounting Dream Soundbar Mount Sound Bar TV Bracket, Sound Bar Bracket for Soundbar with Holes/Without Holes, Non-Slip Base Holder Extends 3.4\ to 6.1\

  • COMPATIBILITY: Our sound bar mount is suitable for most sound bars up to 20 lbs. It is universal for most sound bar with holes/ without holes, and fits most TVs up to 800x400mm. This sound bar bracket fits most fixed, tilt, full motion TV mount..
  • FLEXIBLE HOLDER: The adjustable base holder extends 6.06"and retracts back to 3.44" for fitting different widths of sound bars, compatible with Samsung, Yamaha and Vizio sound bars..
  • SOLID LOCKING MECHANISM: The sound bar TV wall mount applies the safety bolts to lock the extendable holder, with special material on the bracket to ensure the sound bar not waggle..
  • EASY INSTALLATION: Decent instruction and necessary hardware are included. Sound bar can be installed with one horizontal bar if shorter than 34’’ and TV VESA less than 400x400mm..
  • DECENT SERVICE: US professional support team answers pre-purchase and installation problems. Sound bar bracket can be installed onto the wall directly. Lag bolts and concrete anchors will be shipped if needed..
Check Stock

JiePai Suction Cup Shower Head Holder Adhesive,Suction Handheld Shower Head Holder Bracket,Removable Wall Mount Holder for Bathroom,Brushed Nickel

  • ...ss. Metal construction provides much higher performance and durability than plastic ones..
  • RUSTPROOF: Round mounting base of this holder is made from premium SUS304 stainless steel to protect against corrosion & rust, suitable for humid environments..
  • INSTANT MOUNT: Use included REUSABLE, ADHESIVE PAD to install this bracket in minutes. On smooth clean surfaces, it can safely hold objects tight. You can simply remove and re-position the way you want it. Just wash the pad with warm water and air dry it before the second use. (Screw-mount installation will damage bathroom wall, suction-based holder might keep falling off due to the weight and use of the hand shower and you need to tighten it again and again..
  • ADJUSTABLE ANGLE: Ball connector swivel angle is 34°(17 per side). Bracket pivots and rotates to position handshower at desired angle. Top of the opening is 0.8" (21mm) in diameter. Bottom of the opening is 0.75" (19mm) in diameter. Tapered shape fits most standard sized handheld shower head..
  • DIMENSIONS: Diameter of mounting base is 2.4" (60mm). Projection is 2.6" (65mm). An extra bracket holder for handheld showerhead to hang at a lower position, and makes it easier for parents to bathe children, or for pet owners to bathe pets..
Check Stock

WUITIN Car Cup Holder Phone Mount,Universal Auto Cell Phone Stand with Drink Expand Cup Holder,360° Rotation Compatible with All Mobile Phones and All Car

  • ...er at the same time. It can not only help you hold your cup while driving, but also help the co-pilot to hold the cup. The bottom of the cup holder is designed with an adjustable tripod, which can be very stable for any prototype...
  • 【360 Rotatable View &360 SEGMENTED BRACKET Arm】The car phone mount head could be rotated in 360°, which enables watching navigation app with the screen horizontally. Our cell phone holder car can be increased by going to tighten the segmented bracket arm to increase stability while not creating a strong wobble,and capable of 360 rotation. You can adjust the distance between you and the holder easily..
  • 【NICE COMPATIBILITY】Teacup compatible with all 4''-7'' smartphones.The bottom of the U-shaped handle slot of cup holder is about 0.5 inches from the bottom.The center console car cup holder could contain Multiple types and sizes bottles,and can be placed in two cupsfit in 2.5 - 3.8 inch bottle, The bottom is equipped with a rubber pad to effectively protect the cup and eliminate noise..
  • 【EASY TO INSTALL】Just insert the cup holder phone mount into the original ca....
Check Stock

ZMTECH Metal Flag Pole Holder (Black) for 1 Inch Flagpole Heavy Duty Aluminum Mount 2 Position Flag Pole Mounting Bracket for House

  • Holds your flag pole stable: Exclusively designed by ZMTECH, this flag pole holder prevents the screws from loosening under strong winds and causing the flag pole to fall. it holds the flag pole more stable with 3 fixed position..
  • Heavy duty bracket: The flag pole mounting bracket is made of premium aluminum, which is extremely sturdy, durable and won't rust. An anti-rust coating on the surface further protects the bracket from damage in hot and rain weather..
  • Fly your flag 45°upwards or 90°horizontal: You can either mount the flag pole horizontally at a right angle to your house or mount it at an upward angle. At either angle, your flag will look majestic!.
  • 1 inch inner diameter: The holder will fit any flag pole is 1 inch or less. It can be installed on your house, porches, walls, yard, roof, or even trucks..
  • What you get: 1 pack upgraded flag pole holder, 3 Butterfly Screws, 4 anchors and 4 screws. You can fix the holder safely on your wall..
Check Stock

Universal Car Rear View Camera License Plate Bracket,Dash Cam Mirror Camera Kit Accessories Rearview Camera Mount, Only Installation Holder for Backup Camera Reverse Camera

  • ▶This rear view camera bracket generally fit the rear cameras included in dash cam kit. Replace the small mount with license plate mount, easier to install..
  • ▶The distance between the two screw holes of this back up camera bracket is 13mm, please confirm the distance between the two screw holes of your reversing camera is 13mm as well..
  • ▶This bracket mount is rear view camera accessory, this backup camera license plate mount includes license plate bracket, rearview camera holder and installing screws..
  • ▶This is a universal rear camera bracket, you just need to make sure that the distance between the two screw holes of your rear camera is 13mm, then buy it with confidence..
  • ▶This rear view camera bracket can be only applied to US car license plates. Please note that do not install your backup camera upside down, you should test picture before installing..
Check Stock

Wall Fixing Bracket Kit for Samsung Soundbar N950 MS750 MS751 HW-N400 HW-MS650 HWMS650, Sound Bar Black Wall Mount Bracket with Accessories

  • Product —– Wall mount bracket for Samsung sound bar, easy to install and save space. Metal holder screw, anti-rust and durable, strudy and stably than plastic holder screw.
  • Compatiblity —– Fit for Samsung HW-N400 soundbar, N950 soundbar, MS750 soundbar, MS751 soundbar, HWMS650 soundbar，HW-MS650 soundbar.
  • Feature —– Wall mount provides unobtrusive wall mounting, great to mount to the wall edge for getting enough space, don’t worry about the sound bar taking up your space.
  • Package list —– 2 x black wall bracket, 2 x long screw, 2 x short screw, 2 x metal holder screw, 2 x wall plug, 1 x user instruction, 1 x wall mount guide.
  • 90 Days Warranty —– If there is any problem , please let us know and we will solve your problem promptly. We promise 100% friendly customer service.
Check Stock

Lokyanwin Shower Head Holder,360°Adjustable Stainless Steel Handheld Shower Head Bracket Holder Wall Mount,Steel Shower Spray Holder Wall Mount Shower Wand Holder,Brushed Nickel SUS304

  • 【Metal Brass Material】- This shower head bracket is made from solid brass material, all metal, one-piece metal construction body. Heavy-duty, no plastic. Polished chrome plated finish shows good performance in resisting corrosion and abrasion. The handheld shower head holder is of premium quality, rust-proof and water-proof. It is wear-resist than plastic, not break easily. Built-to-last and worth any penny..
  • 【Moving & Adjusting Upgraded】- The handheld shower head bracket is improved for easier moving and adjusting. The brass ball joint connector is moving easily up and down with the handheld shower in the shower head wall mount holder due to the leverage. We have strictly factory tested to move and adjust many times. The tightness of the ball joint connector is for bearing heavy shower heads well without sliding down easily..
  • 【Well-Designed Card Slot】- The card slot of this rv shower wand holder is tapered, fits 3/4” handheld shower. Its top diameter is 0.9”(23mm), bottom diameter is 0.78”(20mm). depth diameter is 1.14”(29mm). Suitable for shower hose bottom diameter between 0.75”~0.87”(19~20mm). NOT fit for shower hose bottom diameter 003e=0.9”(23mm). Please mind and measure your shower hose bottom diameter before order. (Wa....
Check Stock

PUUUCI Apple TV Mount Compatible with All Apple TVs - Transparent Wall Mount Bracket with Remote Holder Fits for All Apple TV 4K / Apple TV HD

  • 【Apple TV Wall Mount Holder】: This clear wall mount bracket with Remote Holder is the latest model in 2021, with powerful heat dissipation function, compatible with all Apple TVs (including the new 2021 Apple TV 4K & Apple TV HD, and the 2nd, 3rd, 4th, 5th, and 6th generations Apple TVs).Apple TV and remote control can be placed in the bracket at the same time..
  • 【With Remote Control Holder】: The wall mount stand with remote control slot, can be placed in all apple tv remote, but not for 1st gen of apple remote..
  • 【Material】: Made of high-quality transparent acrylic material, sturdy and beautiful..
  • 【Protect Your Apple TV】: We all know sometimes small children, pets, and beverages are not best friends with your expensive electronics.So wall mount your Apple TV and Siri Remote, and keep it safe out of reach from danger..
  • 【Easy to Install】: The TV mount can be placed directly on the table or mounted on the wall.We highly suggest you to use screw way which can last long !Simply attach, insert and connect.Package included: 1 X Clear TV Mount 3 X Screws + 3 X Wall Anchors(Apple TV and remote are not included)..
Check Stock

iSaddle for Garmin Nuvi Drive Drivesmart Air Vent Mount Holder - 17mm Ball GPS Vent Mount Base & Bracket Cradle Mount for Garmin GPS 40 42 52 55 60 61 67 68 2457 2497 2539 2557 2558 2577 2597 LT LMT

  • [WIDE COMPATIBILITY] Perfect Compatible with ALL Garmin Devices with 17mm Swivel Ball Mounting Pattern(52 Mounting Bracket Included).
  • Also Perfect Base for Most of Cell Phone Air Vent Mount Holder(Mounting Bracket NOT Included)..
  • [INSTALL IN SECONDS] Tool-Free & No Need User Manual, Just Screw the Knob to Mount the GPS Vent Base, Suit with Both of Horizontal and Vertical Air Vent..
  • [MINI BUT STABILITY] Made of High Quality Plastic & Steel, iSaddle Air Vent Mount is Super Mini But Very Strong & Durable.
  • Built-in Silicone Pad will Protect Air Vent Clip Well..
  • [IDEAL REPLACEMENTS] More Flexible & Better Viewing Position than Original Garmin Windshield Mount Holder, Ideal Replacement for Garmin GPS Accessory, Compatible With Garmin 010-11952-00/010-11983-00. Mount Bracket for Garmin 40 42 50 51 52 54 55 56 57 58 60 61 65 67 68 2457 2497 2539 2577 2539 2577 2558 2559 2557 2577 2558 2597 2598 2599 2689 2699 LM LMT LMTHD..
  • [12 MONTHS WARRANTY] Purchase Now, Risk-Free, 100% MONEY BACK GUARANTEE IF ANYTHING GOES WRONG WITHIN 365 DAYS!.
Check Stock

Socobeta Adjustable with 1/in Thread Dual Hot Shoes Holder Mount Adapter Bracket Screw Mount Useful Full-Protective Camera Flash L-Bracket for Camera

  • WITH TWO HOT SHOES：Dual hot shoes holder mount is equipped with two hot shoes, offering multiple combination for mounting flash with other accessories, you can adjust it according to your equipment needs..
  • BEST GIFT FOR FRIENDS：If you have friends who love photography or are often engaged in photography, you can give camera l bracket mount video grip l bracket ring to them, and they will be very happy. Of course, you can also prepare for your child..
  • STANDARD 1/4IN SCREW THREAD：The international standard 1/4in screw thread fits most cameras and camcorders. L shape design is good for horizontal or vertical shooting with a comfortable handle..
  • STURDY AND DURABLE：Camera flash L-bracket is made of the quality material, lightweight, sturdy and durable. Moreover, the service life of the bracket is longer than that of the general bracket..
  • EASY INSTALLATION：The installation method of the flash bracket mount is very simple, you only need to install it according to the correct installation method, l bracket camera mount is very simple and easy to learn..
Check Stock