Top Hole Enlarging Drill Bits

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock

BlueNatHxRPR 5 PCS 1" to 1-1/2" Wood Spade Drill Bit Set Wood Paddle Flat Bits

  • Production Name: Wood Spade Drill Bits Set, Bits Size Included:1, 1-1/8,1-1/4, 1-3/8,1-1/2", Bits Quantity: 5 PCS.
  • Made of high steel and very durable,widely used for wood, PVC,and other soft woody material as hole cutting.
  • HIGH QUALITY: Self-centering spade tip for spot-on starts, locate hole circle center firmly,drill hole more smoothly and regularly.
  • HIGH EFFICIENCY: Flat paddle design features sharp cutting edges, ensures the hole smooth clean, much faster than traditional wood drill.
  • QUICK-CHANGE HEX SHANK - 1/4" hex shank with groove helps reduce slipping and prevent falling off as well as safety, universal for the most drill driver tool of brands in the markets,one drill use all drill bits.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Core Drill Adapter 5/8 Threaded Arbor Diamond Hole Saw 5/8 inch - 11 to 1/2 Shank Sanding Attachment Arbor Shaft Adaptor Heavy Duty

  • HEAVY DUTY Core Drill Adapter for 5/8-11 thread to straight 1/2 inch shank..
  • Core Bit Adapter converts 5/8" - 11 Thread to 1/2 inch Straight Shank.
  • Heavy Duty - Twist Resistant Alloy- Most Diamond Core Masonry Bits, tile drill bits, stone polishing kit, granite polishing kit, diamond polishing pads, diamond cup grinding wheel, grinding stone for drill and Back Holders are 5/8 inch - 11 threaded adapter for core bits.
  • Standard drill chuck adapter or core drill bit adapter will help you use your own standard drill with drill grinding bit and drill bit core. Connects to 5/8" 11 Female Threaded Tools, Core Bits, Hole Saws - Makes them a 1/2 inch Shank as a drill shank adapter.
  • Drill bit adapter for granite, concrete, glass, brick. Use your diamond core bits for granite or diamond hole saw for grinder with standard drill. Now you can use sanding, cutting and polisher tools with standard chuck shank with our adapter for core bits.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

NordWolf 12-Piece Metric Step Countersink Cone Drills with 1/4 Hex Shank Multi Drill Saw & Automatic Center Punch Titanium HSS Set in Storage Box

  • 【Step Drills and Cone Drill】3 piece 5/9/14 step drills (4-12/20/32mm) and 1 piece cone drill (8-20mm). Laser marking of step size provide convenient and accurate drilling.
  • 【Countersink Drill Bits】6 piece countersink drill bits: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm - 90° point, three cutting edges, ideal for deep countersinking.
  • 【High Quality】All drills are HSS Titanium coated, come with 1/4" (6.35mm) hex shank, and are precision ground, heat treatment, and hardened for consistently accurate drilling or enlarging holes into sheet & non-ferrous metals, wood and plastics.
  • 【Multi-Drill Saw & Center Punch】Multi drill saw (6mm) can be used in combination with drills, saws, rotary files, reamers and routers. Automatic brass center punch provides high impact spring-loaded strike when pressed against working surface.
  • striking force is adjustable by turning cap.
  • 【Ergonomic Storage Box】Insert hex shank into black plastic holder at 10°-15° first, then push head of product down to fix firmly. Box can be re-used to store other tools by taking out foam inlay.
Check Stock

1 3/8 Diamond Hole Saw Core Heavy Duty Diamond Drill Bit Concrete Granite Quartz Porcelain Slab Countertops Ceramic Tile Brick Brazed with 5/8″-11 Thread 1-3/8 in

  • Heavy duty. pro grade, vacuum brazed diamond hole saw for quartz, granite, concrete, cinder block, brick drilling..
  • Diameter is 1-3/8 inch with 5/8 inch – 11 threaded connection, maximum depth of cut is 1-3/8 inches..
  • Diamond vacuum brazed commercial grade, long life diamond core drill bit hole saw. For heavy duty professional applications..
  • Tile core bits used with core hole drill tools with 5/8 inch -11 threaded angle grinder or other tools..
  • Commercial grade, professional quality heavy duty diamond bits for drilling stone, diamond hole saw bits, diamond drill bit for granite bits for drill.
Check Stock

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Ryobi P721 One+ 1,800 Lumen 18V Hybrid AC and Lithium Ion Powered Flat Standing LED Work Light with Onboard Mounting Options Battery and Extension Cord Not Included Light Only

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x....
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock