Top Hole Saw Cutter

8Pcs Concrete Hole Saw Kits, 40mm 65mm 80mm 100mm 125mm 5pcs SDS Plus Shank Masonry Hole Saw Cutters, 110mm Connecting Rod, 2 Center Drill Bits for Cement Brick Wall

  • This Concrete Hole Saw Kit has 8 pieces included. 5 pieces hole saw cutters: 40mm, 65mm, 80mm, 100mm, 125mm. One piece connecting rod 110mm, and 2 pieces drill bits..
  • The wall hole saw cutter kit are made of high quality alloy metal for long time use..
  • This Cement Hole Saw Drill Bit is Very easy to use with fast speed..
  • These Hole Saw Cutters are Mainly used in drilling walls, stones, bricks or installing air conditioners, range hoods, pipeline opening, etc..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Rannb 38mm/1.5 Inch Hole Saw Carbide Tipped Hole Saw for Cutting Stainless Steel Plate, Iron, Steel

  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance..
  • ⭐【Dimension】Cutting Dia: 38mm/ 1.5".
  • ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material..
  • ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit.
  • ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling..
Check Stock

Diamond Hole Saw Cutter Tools Coated Drill Bit Angle Grinder Hole Opener for Ceramic Marble Stone Glass(60mm), Hole Saw

  • PREMIUM DIAMOND MATERIAL: Hole saw cutter tools is made of premium diamond material with high hardness, so it is durable in use..
  • HIGH DRILLING SPEED: Diamond hole saw has high drilling speed, neat and smooth opening, and has no broken edges..
  • SPECIAL DESIGN: Chip removal hole design reduces cutting resistance for easier drilling, it effectively improves work efficiency..
  • PAINT SPRAYING TREATMENT: Paint spraying treatment can avoid rusting of the drill bit..
  • SCOPE OF APPLICATION: Diamond hole saw is suitable for opening and coring of marble, stone, vitrified tile, ceramic tile, etc..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Saw Blade Bushing Set Saw Blades Adapter Ring Aperture Conversion Gasket , 1Inch to 20mm, 1inch to 5/8Inch, 7/8Inch to 5/8Inch, 20mm to 5/8Inch, 5/8Inch to 1/2inch, 1.25Inch to 7/8Inch, Pack of 12

  • ...eter 5/8Inch to 1/2inch, 0.78Inch to 5/8Inch, 7/8Inch to 5/8Inch, 1inch to 5/8Inch, 1.25Inch to 7/8Inch, 1Inch to 0.78Inch. Washer thickness: about 1.2-1.3mm, the washer should be the same thickness as the saw board of the saw blade, or a little thinner for more stability..
  • Usage description: adapters to mount brush cutter blade to echo trimmer. These did the trick to center the blade to the trimmer. Used for adjustment and conversion of alloy saw blades and other mounting holes becoming smaller. It is suitable for saw blade/marble blade inner hole conversion, angle grinder and cutting machine..
  • 12pcs Saw Blade Bush / Spacer, Saw Blade Bushing Washers, There are two pieces of each size, Total of 12 pieces.
  • VIP after-sales service guarantee: fast refund and exchange. Professional delivery facilities and professional delivery personnel will prevent the loss of goods, and the goods will reach you safely and quickly..
Check Stock

LIUDAINC Diamond Drill Bit Set Hole 5PCS Steel Hole Saw Cutter Tool Saw Tooth HSS Drill Bit Hole Saw Set Stainless Steel Metal Alloy Kit 16Mm 18.5Mm 20Mm 25Mm 30Mm

  • ➤ Widely Used: The hss hole saw kit is able to cut round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet,....
  • ➤ HSS Hole Saw Kits: Package Included 5 pcs hole saw: 16/18.5/20/25/30mm.
  • ➤ Wide application: Our Hole saw set is suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
  • ➤ Special Design: This hole cutter set applies central spring design. It can control the amount of feed and helps chip removal, avoiding damage to....
  • I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.
Check Stock