Top Hole Saw Drill Bit Sets

4-1/2” Diamond Drill Bits Glass Hole Saw Drill Bit Set for Glass Ceramics Porcelain Ceramic Tile Marble

  • SMALL DRILL BIT: Hole diameter: 115mm(4-1/2"),total length: 56mm(2.2").Package includes 1 pcs 115mm diamond hole saw drill with a transparent box..
  • HIGH QUALITY: Diamond ceramic hole saw are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion..
  • LARGE CLEARANCE HOLE: These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • APPLICATION: Suitable for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, marble, light stone and fiberglass..
  • WARM TIPS: Start drill at 45 Degree to surface and align to 91 Degree as hole forms.Water is required to cool down the drill when using them which will greatly extend the life of the bit..
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

COMOWARE Drill Bit Set, 246 Pcs Drill Bits, Drill Bit Sets for Cordless Drill, Drill Driver Bit Set for Wood, Metal, Masonry, Cement and Screwdriver Bits Set Combo Kit

  • 【ALL-IN-ONE CONVENIENCE】- COMOWARE 246 pcs drill bit set includes a wide variety of bits for wood, metal, masonry drilling and screw driving. It is a must-have drill driver bit set in your home garage. Ideal for DIY project and home repair..
  • 【CAPABILITY & DURABILITY】- Drill bits and screwdriver bits are made from superior HSS material for improved strength and durability. And the titanium finish and black oxide coating help the bits deliver higher drilling performance on wood and metal. Whether you are a mechanic or a DIY enthusiast, this drill bits combo kit will assist you in every application..
  • 【WELL ORGANIZED CASE】- The 246 pcs drill bits sets come with a portable storage case with uncluttered layout. There is a sponge cushion inside to help prevent the drill bits from falling off or mixed use. And the blue labels with drill bit sizes on are designed for easy identification of the bit size..
  • 【COMPLETE DRILL ACCESSORIES KIT】- Screwdriver bit set: 66 x 1" screwdriver bits, 30 x 2" screwdriver bits, 6 x nut drivers and 2 x hex keys. Twist drill bit set: 57 x HSS titanium drill bits, 30 x HSS b....
Check Stock

Koopi 2 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, 51mm Dia Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 2" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
Check Stock

Kyoffiie Diamond Drill Bits, 16Pcs Diamond Hole Saw Set with 10Pcs Tile Hole Saw Set & Adjustable Hole Saw Guide Jig Fixture 6mm-50mm for Glass, Porcelain, Ceramic, Marble, Tile, Granite

  • 【Premium Material】- These hollow drill hole saw set are made of high speed steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results..
  • 【Multiple Sizes】- 10 Sizes tile drill bits to meet various needs. Including 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, diameter of triangle bit: 6mm, 8mm, 10mm, 12mm. Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit..
  • 【Ergonomic Design】- The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. When debris gets stuck in the small hole saw. We can use our screwdriver to pull it out. Ceramic drill bit to provide you with the perfect experience..
  • 【Adjustable Fixture】- Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4.
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

1 1/4 Inch Diamond Hole Saw Drill Bit Ceramic Porcelain Tiles Quartz Granite Countertop Glass Bottle 1.25 inch Tile Drill Bit 1-1/4 inch Hole Cutter

  • 1-1/4 inch Premium Quality Diamond Hole Saw Solid Steel Body: Spins True, Cools Better, Lasts Longer.
  • Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
  • Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
  • Increased Body Height for Deeper Cuts Clean, Precise, Fast, and Dustless Cuts Every Time.
  • Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.
Check Stock

6 Inch Hole Saw for Making Cornhole Boards - Heavy Duty Steel - Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game

  • This Hole Saw Drill Bit is designed for wood / plastic cutting. Great for Making Cornhole Boards. Package included: 6” hole saw, mandrel and drill bit work with any 1/2" drills..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic..
  • 6” hole diameter - prefect size for Corn hole board Drilling and no matter what you project like cutting 6” diameter holes through wood and plaster.
  • 7/8" saw blade depth. Pins lock the saw well and prevent Too tight or falling off..
  • With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
Check Stock

76mm / 3 Inch BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 3" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • It is made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock