Top Hole Saw For Drywall

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

HLOFIZI 4-3/8 Hole Saw for 4' Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 4-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 4" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

  • LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
  • FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
  • PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
  • MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
  • Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.
Check Stock

All New, Made for Amazon In-Wall Cable Management Kit

  • Accessory designed to hide AV cables for Amazon Fire TVs and other TV brands..
  • Conceal AV cables behind the wall in under 20 minutes with this DIY TV cable management kit. Includes all needed hardware in the box, just bring a drill..
  • Ideal for hiding HDMI, audio, and in-wall rated power cables behind the wall. Flexible design comfortably fits 4 thick HDMI cables..
  • DIY friendly design Installs in 4 simple steps. Comes with a drywall hole saw drill attachment to ensure a perfect fit..
  • Locks onto the drywall for a safe & secure finish. With paintable covers, these grommets can blend into any décor..
  • With Sanus, you get a top quality product backed by our us-based customer care team, which is ready to answer your questions 7 days a week..
  • Included In Box: 2 Grommets, Hole Saw, Driver Bit, Instruction Manual..
Check Stock

VIKITON 6 Inch Hole Saw with Arbor for Metal Wood and Plastic Cutting, 152mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal, Handy Hole Saw Kit Set

  • 【Long Service Life】Bi-Metal construction , special flexible steel saw body and high speed steel cutting teeth , makes longer service life , rust proof , great corrosion and heat resistance..
  • 【Superior Versatile Performance】High speed steel sharp cutting teeth effectively drills through metal , wood , corn hole boards, PVC board , plastic and drywall , clean and smooth , high precision..
  • 【Easy to Use】Rotate the arbor and hole saw until it's very close (don't need tight), then line up the locking pins with the hole at the hole saw and screw them tightly..
  • 【High Efficiency】The deep gullets on the sides of hole saw provides fast chip removal, and the geometry funtional slot on the bottom of hole saw provides easy plug removal..
  • 【Package Include】1 pc 6'' hole saw, 1 pc arbor(with 1 drill bit), 1 pc drill bit for replacement, 1 pc hex key..
Check Stock

4-1/4 Inch 108mm HSS Bi Metal Hole Saw Cutter with Arbor for Wood , MDF,Metal

  • This hole saw kit includes 1 of 4-1/4” (108mm) hole saw, 1 of 0.43”(11 mm) hex shank large mandrel , 1 of Ø 1/4” (6.35mm) x 3.5" (89mm) Sliver HSS pilot drill bit for wood and soft metal, 1 of Ø 1/4” (6.35mm) x 3.5" (89mm)Black HSS pilot drill bit for hard metal. Max cutting depth: 1-1/2”(38mm).
  • 二，The set includes the most popular hole saw sizes on the market to meet your different demands. Ideal for Wood, Plasterboard, PVC, Drywall, Aluminum, Sheet Metal. Special kit for DIY projects and household maintenance and repair， utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling with the hole saw set...
  • Bi-metal strip is made by laser welding machine and vacuum heat treatment, providing better hardness, strength, and longer life..
  • 100% Satisfaction Guarantee: If you are not satisfied, Free return..
Check Stock

HLOFIZI 4 Inch Carbide Grit Hole Saw for Recessed Lights and Dryer Vent, Cuts Through Stucco, Ceiling Old Plaster, Drywall, Cement Board, Hard Wood with 1-1/2\ Depth, Up to 6X Faster

  • 4 inch hole saw ideal for installing recessed lighting, dryer vent hole, and other roof vent.
  • Drilling holes through lots of abrasive materials, ceiling stucco, old plaster, drywall, hard wood, plywood, sheetrock, cement board, plastic, PVC. Not recommended for cutting metal sheet, brick, concrete block, cement tile.
  • Constructed with long-lasting tungsten carbide grit edge, 4 in. hole saw easy and fast cuts thick wood, plaster stucco ceiling & wall. Cutting depth 1-1/2 inch.
  • Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Hole saw arbor: fit 3/8" chuck.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4" carbide hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.
Check Stock

GoSports 6\ Hole Saw - Heavy Duty Steel Design - Great for Making Cornhole Boards

  • CONSTRUCTION GRADE: Heat treated carbon steel alloy 6 inch hole saw blade, non-binding clean edge design.
  • PROFESSIONAL CUTTING: Hole saw cuts smooth and even 6 inch diameter holes through wood, drywall, plaster and thin metal.
  • PROJECT TOOL: Built tough for repeat use and handy for working on cornhole boards, air ducts, ceiling lights, speakers and more.
  • DIY READY: Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" or 1/2" drill.
Check Stock

HLOFIZI 2-1/8 Inch Carbide Tipped Hole Saw Multi-Material Hole Cutter for Wood, MDF, Drywall, Plaster, Fiberglass, 5X Faster, Green

  • Multi-Material Applications - 2-1/8 hole saw ideal for cutting hard wood, MDF, drywall, plaster, stucco, sheetrock. Not recommended for metal products.
  • High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
  • Easy plug removal - Optimized slot design for fast plug removal. Up to 2 inch depth of cut. Shank fits 3/8" chuck.
  • More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
  • 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/8" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.
Check Stock

Drywall

  • Hole Saw quickly and smoothly cuts cleaner holes in drywall and ceiling tiles.
  • Blades adjust to cut holes from 2 to 7-Inch diameter.
  • Fits most 3/8-Inch and 1/2-Inch drill chucks.
  • No additiol tools needed to adjust the hole saw.
Check Stock

Drywall: Hanging and Taping

  • Hole Saw quickly and smoothly cuts cleaner holes in drywall and ceiling tiles.
  • Blades adjust to cut holes from 2 to 7-Inch diameter.
  • Fits most 3/8-Inch and 1/2-Inch drill chucks.
  • No additiol tools needed to adjust the hole saw.
Check Stock