Top Hole boring Tool

OSCARBIDE 5/8''by 8''Indexable Boring Bar Right-Hand Sclcr Boring Bar with CCMT09T304(CCMT32.5),1 Piece

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Boring Bar Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Osborn 77378SP NovoFlex Honing Tool Silicon Carbide 1200 Max RPM 2.5 Hole Diameter 2.75 Item Diameter 0.25 Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is....
  • Size: 1200 Max RPM, 2.5" Hole Diameter, 2.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Shankly Dial Bore Gauge 0.001m Deep Engine Hole Cylinder Measurement Inside Micrometer Gage Cylinder Tool Kit 2m to 6m Comes with Carrying Case for Bore Measure

  • ✅ ACCURATE & PRECISE: This dial bore gauge is primarily used by machinists to precisely measure the inner diameter of bores in motor engines. When measuring cuts or hole sizes, a dial bore gauge's speed and accuracy can save a lot of time.
  • ✅ MEASURING RANGE: With this dial gauge, you can easily and accurately measure cylinder bores for taper. They have a measuring range of 2-6m and 0.001m and are equipped with a self-centering guiding protective bridge for dependable and repeated use.
  • ✅ WELL-CONSTRUCTED ENGINE TOOL: A dial bore gauge that is built to be irreplaceably reliable and precise, allowing for more efficient and trouble-free repairs. This premium bore gauge is built to last.
  • ✅ HEAVY-DUTY CARRYING CASE: Our bore gauge comes neatly in a tidy blow molded case with a built-in handle and slide latches that will make it simpler for you to keep track of each tool and arrange the entire set.
  • ✅ SATISFACTION GUARANTEED: We stand by the term "quality," and all of your items will arrive in good condition when you order from Shankly. Please contact us if you have any questions about your purchase. We will gladly assist you.
Check Stock

Osborn 77283SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 3.5\ Hole Diameter, 3.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 3.5" Hole Diameter, 3.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

Osborn 77240SP NovoFlex Honing Tool, Silicon Carbide, 1200 Max RPM, 1.5\ Hole Diameter, 1.75\ Item Diameter, 0.25\ Shank Diameter

  • Honing Tool: NovoFlex Flexible Honing tools have round, abrasive beads fastened to the ends of flexible filaments.
  • Self-Centering Tool: This self-centering tool will conform to the bore surface providing a consistent, even surface finish over the life of the tool.
  • Flexible Honing Tool: The actual NovoFlex tool will be approximately 10% larger than the hole size but will easily fit in as it is extremely flexible.
  • Cylinder Hone Brush: The hone brush is perfect for honing brake cylinders.
  • the ATB NovoFlex Flexible Honing Tool will even provide an "edge break" which is not possible with conventional honing stones.
  • Size: 1200 Max RPM, 1.5" Hole Diameter, 1.75" Item Diameter, 0.25" Shank Diameter.
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock

DIABLO Bi-Metal and Carbide Tipped Hole Saw Set (9-Piece)

  • The Diablo 9-Piece Hole Saw Kit features five hole saw cups (bi-metal and carbide tipped) and Diablo's four piece SnapLock PLUS mandrel system for quick and easy hole saw cup changes for maximum job performance. This new, high performance hole saw set delivers faster cutting performance and increased productivity versus standard bi-metal and carbide-tipped hole saws. Unlike anything on the market, Diablos hole saws and SnapLock Plus mandrel system simplify the attachment process for fast and efficient hole saw mounting. These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass.
  • and tool-free plug ejection and Variable Tooth Design for faster cuts..
Check Stock