Top Hollow Point Scope Rings

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Wheeler Scope Ring Alignment and Lapping Kit, 34mm for Scope Mounting, Accuracy, Gunsmithing

  • FUNCTION: Lapping the inside scope rings will reduce or eliminate any shifting of the scope inside the rings.
  • RELIABLE: Alignment bars provide the perfect alignment of both rings and will also diagnose any vertical or horizontal misalignments.
  • CONVENIENT: Lapping handle attaches to bars for easier use.
  • INCLUDES: 220 grit lapping compound, alignment bar, lapping bar.
Check Stock

BARSKA 4X20 Rimfire Riflescope

  • Precision Aiming: The 4x magnification scope features 1/4 MOA click adjustments for precision accuracy..
  • Quality Construction: The scope comes with coated optics, providing impressive viewing clarity. Tube diameter 3/4"..
  • 30/30 Reticle: The scope comes with 30/30 crosshair reticle for easy targeting, ideal for any type of shooting..
  • Parallax Free: The scope is parallax free at 50 yards, making it easy to target at closer range..
  • Accessories: The scope comes with set of 3/8" dovetail rings, lens cover, and lens cloth..
  • Included components: Mounting Rings, Lens Covers and Lens Cloth.
Check Stock

Monstrum Rifle Scope Throw Lever | 46 mm Diameter | Standard

  • Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
  • Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
  • Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
  • Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
  • All Monstrum scope accessories come with a lifetime guarantee..
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

oupuntoe Scope switchview Throw Lever Fit 44mm Diameter Magnification Ring

  • Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
  • Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
  • Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
  • Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
  • All Monstrum scope accessories come with a lifetime guarantee..
Check Stock

Fidragon Scope mounts Scope Rings QD Scope Mount Ring Riflescope Rings 1 inch Scope Mount 2 Pcs

  • A good set of Quick release rings. Riflescope Rings 1 inch Scope Mount 2 Pcs.
  • the quick release function on each ring as long as the scope stays mounted to the rings..
Check Stock

Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454 Engineering Professional Reticle Leveling System

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings.
  • ACCURACY: Reticle leveling is key for scope accuracy, the Level-Level-Level & the Professional Reticle Leveling System provide this, with an integrated bubble level for precise measurement & Reference Level with a magnetic bottom for added stability.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Burris 420180 Xtreme 1" Tactical Aluminum Scope Ring Set (Two Rings) for Picatinny-Style Mounts, Six Hole, Low 1/4 in. Height, Matte Black

  • ... withstand any amount of recoil and multiple uses due to its strong performance.
  • FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
  • suitable for all 1-inch / 25.4mm scope tube.
  • VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
  • this will hold any other 1" accessories that you might want to mount.
  • EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
  • the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
  • LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively lightweight compared to larger-sized rings which are particularly beneficial for those who need to carry their gun over long di....
Check Stock

Tydeux 1' and 30mm High Profile Quick Release Scope Mount Rings for Weaver and Picatinny Rail - Pack of 2

  • 【SIZE AND RAIL】1" and 30mm high profile quick release scope mount rings fit for weaver picatinny rails. Add or remove the internal rings in order to switch from 1" and 30mm diameter. Perfect for mounting most scopes which are in 1"/ 25.4mm scope tube.h from 1" and 30mm diameter. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • 【HIGH QUALITY】Precision-machined with matte black anodized aluminum, sturdy and lightweight construction, high quality, sturdy construction, build no wobble, offer durable safe performance in the field..
  • 【EXCELLENT PERFORMANCE】The product is very light and easy to carry. Excellent materials, while maintaining strong and light weight, provide excellent waterproof performance.The product can still work normally in humid and harsh environment. But when not in use, please store it in a dry and cool place..
  • 【SUBTLE DESIGN】Built-in tape protection, built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding position accurately. With four screws design, it will hold the scope more securely..
  • 【EASY INSTALLATION】Ergonomic and quick detach fold-over clasp off to the side of scope rings help strengthen t....
Check Stock