Top Hollow Section Pipe

Big Dipper W-250-IS - 25 GPM Stainless Steel Automatic Grease Removal Unit

• ... & outlet): 1.77 Inches / 4.5 cm. Length of the threaded pipe: 80 cm / 31.5 Inches.  Flowing speed up to 13 Gallons Per Minute (G.P.M.).
• 【Upgraded Grease Trap】 Tee filter pipe design highly improves the filtering effect that oil floats on the surface, and the water flows from the bottom of the pipe to the next section. Special valve design for drain out all water, easy for you to clean the water tank. Made of heavy-duty 1.0 mm thickness stainless steel, which is strong and durable, anti-corrosion, not easily deformed. The double-layer edging process makes the edge feel more comfortable and will not cut your hands..
• 【Working Principle】 Wastewater flows into the grease trap from the sink, the fats, oils, and grease will rise to the surface and be collected between the baffles. The water will sink and flow into next section from the bottom of the tee filter pipe. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
• 【Easy To Assemble】 Connect the pipe of the sinks and dishwasher to the Grease Trap inlet. Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school, or small sink or d....

Set of 3 - Advanced Drainage Systems 0664AA Downspout Adaptor, 6" x 4" x 6"

• Plastic Universal Downspout to Drain Tile Adapter.
• Universal coupling to fit INSIDE any 6" pipe including black corrugated landscape pipe, PVC SDR 28, 35, Schedule 40, clay & cast iron.
• Size: Top inside dimensions: 6 1/8"x6 1/8" Bottom outside diameter: 5 3/4" that way it can easily fit INSIDE your 6" pipe.
• The diameter of the round section is slightly smaller so it can fit INSIDE any 6" drain pipe you are going into..
• Flexible tabs make it easy to secure into your drain pipe - Made for 6"x6" Downspouts - Proudly made in the USA!.

Rohn 25G 50' Tower with Hinged Base (Fold Over Base)

• INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS (1) ROHN 25AG2 9' TOP SECTION (1) ROHN SBH25G 3' 4" HINGED SHORT BASE FOR EMBEDMENT IN CONCRETE. *All Installations using a hinged base MUST be guyed and/or bracketed. See our store for these items* *These bases are NOT rated for use in self-supporting applications*.
• The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
• 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design. *There are no wind/ice/load guidelines for this set up - you must consult a professional installer. We make no claims that this set up will handle any certain wind/ice/load specifications. This kit is offered as a convenience to our customers*.
• Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more info....

SDTC Tech 12-Pack U-Shaped PVC Water Pipe Clamps Fit for 25mm OD, Compatible with 3/4" ID PVC Pipe

• 1" Inner Diameter U-Shaped PVC Pipe Support Clips suit for water supply systems for civil and industrial constructions, not easy to deformation and durable..
• Fit Pipe OD: approx 25mm / DN20, compatible with 3/4" ID SCH 40 PVC Pipe..
• Made of high quality PVC, with tight structure, Toughness and high strength, can fix and protect the pipelines well..
• Comes with screws and hollw wall anchors, easy and convenient for installation, and keep your pipe close to the wall..
• Package includes 12pcs PVC Pipe Clamps + 12pcs hollow wall anchors + 12pcs mounting screws..

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

• ...t is recommended to use a fill dish or other gravity process..
• BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

MOCW 3.5" Cold Side Intercooler Pipe & Boot Upgrade Kit Compatible with 2011-2016 Ford 6.7L Powerstroke Diesel F-250 F-350 F-450, Silver

• 【Features】-Color: Silver / Black. 3.5 inch intercooler piping kit. Fits Cold Side. Silicone Boots. One full year of warranty..
• 【Compatibility】-Fit for Ford 6.7L Powerstroke Diesel 2011- 2016 F-250 F-350 F-450..
• 【Durable Material】- Aluminum construction-rust free and heat dissipation for a long lifetime.Heavty duty four ply silicone boots and stainless steel T-bolt clamps..
• 【Specifications】- Upper Section Pipe Diameter: 3.5 inches.
• Silicone Boot 2: 3 inches to 3.5 inches..
• 【Easy Installation】- Come with hardware and tools (as picture shows)..

Intex Solar Cover Reel, for 9ft - 16ft Wide Intex Above Ground Pools

• ...ooth Operation. The Pool Cover Reel Has a Mechanical Lock To Prevent Rotation Of Roller When The Cover Is Rolled..
• [ Fit 12 Feet To 22 Feet Pool ] - This Pool Reel Is Suitable For 5.9 Feet,12 Feet To 14 Feet And 18 Feet To 22.5 Feet Wide In-Ground Swimming Pools. Include 5-Section Aluminum Design Pipe, You Can Use One Section Tube For 5.9 Feet Wide Pool, Also Can Use 3 Section Tube For 12 Feet To 14 Feet And Use 5 Section Tube For 18 Feet To 22.5 Feet. Please Note That It Is Not Fit For 14.1 Feet To 17 Feet Pool..
• [ Durable Aluminum Tube ] - Eco-Friendly PP/TPR Elastomer Qualified Turntable, Maintenence-Free, Rust-Free Construction: 5-Section Aluminum Pipe Design Are Easier To Support The Cover Not Easily Droop. Grooved Reel Tube Design Avoids The Strap Falling Off. Stainless Legs And Aluminum Reel Makes Nothing Rust. All The Part Above Makes The Nollapo Pool Cover Reel Thick And Solid..
• [ Superior Quarity & Easy To Assemble ] - Lockable Lockable Telescopic Tube Can Prevent Shaking In The Process Of Use. Large Treaded Wheels And Sturdy Hand Crank Ensure Easy Operation. This Reel Has a Good Balance, Easy And Large Enough....

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

• ...t is recommended to use a fill dish or other gravity process..
• BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

• ...t is recommended to use a fill dish or other gravity process..
• BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

• ...t is recommended to use a fill dish or other gravity process..
• BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

• ...t is recommended to use a fill dish or other gravity process..
• BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Majestic SL1130 Majestic SL1130 30 Degree Elbow (Offset and Return) for The SL1100 Series