Top Honda Camber Plates

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

Longacre® 52-79505 Deluxe Toe Plates (pair)

  • Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
  • The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
  • Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
  • The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
  • Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.
Check Stock

BTSHUB Rear Trailing Arm Bushing Remover and Installer Tool Bushing Press Kit Copatible for Honda & Acura

  • FUNCTION: The Rear Trailing Arm Bushing Remover Tool is used for replacement of the rear trailing arm bush (moveable metal suspension pieces on the....
  • APPLICATION: For Honda or Acura vehicles with trailing arm bushings.
  • Suitable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol....
  • EASY STORAGE: Comes with a premium well-organized box for easy storage and transport. The tool is stored safely in a beautifully packaged case that....
  • UNIQUE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to....
  • HOW TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link....
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

Coilover Suspensions Shock Struts Spring Assembly SCITOO Full Set Shocks Struts Kits for 1994-2001 Acura Integra / 1992-2000 Honda Civic / 1993-1997 Honda Civic del Sol

  • 【FITMENT】The Coilover Suspensions Kits fits for 1994-2001 Acura Integra / 1992-2000 Honda Civic / 1993-1997 Honda Civic del Sol.
  • 【SAFETY AND COMFORT】Easy to control, significantly improves stability when bumping or cornering, effectively dampens driving vibrations and....
  • 【FEATURE】 the Coilover Suspensions Strut’s height and camber plate Height adjustment includes adjusting tools Front struts: 12kg, Rear struts:....
  • 【ADVANTAGE】Durable construction and precise design to improve vehicle control.Economic and security, to adjust the rough road to better control.
  • 【NOTES】Please double confirm the compatibility before purchasing. In Order to Avoid Buying the Wrong Coilover Suspensions Kits, Please Check the....
Check Stock

Heavy Duty Clutch Kit for Honda TRX 400EX TRX400EX 1999-2014 w/Springs & Clutch Cover Gasket Replace 103068009 1030660005

  • Clutch Kit Fitment - Heavy duty clutch kit fit for 1999-2008 Honda Sportrax 400 TRX400EX 2x4, for 2009 Honda TRX400X 2x4, for 2012 Honda TRX400X 2x4,....
  • What You Will Get - Heavy duty clutch kit with Springs includes the full set of friction, steel separator plates and springs..
  • Clutch Kits Function - Increased flywheel effect of steel plates improves power spread, enables the engine and transmission to smoothly engage and....
  • Material + Easy to Install - All clutch kits include steel plates which outlast stock alloy units and prevent heat distortion, the gasket is made of....
  • Customer Service - 100% tested, professional installation is highly recommended, you will get a 2-years shelf life for our store, If there are any....
Check Stock

JINFANNIBI Complete Clutch Kit Heavy Duty Springs and Gasket Compatible for XR200 XR200R ATC200X XL185S 1980-2002

  • One set Contains Friction Plates Steel Separator Plates Springs and Gasket High-quality and Packaging.
  • Each Part is Manufactured Using the Best Materials and High Technology to Assure Long Engine Life and the Most Efficient Performance.
Check Stock

ECCPP Coilover Struts Spring Shocks Assembly Adjustable Strut Shock Suspension Full Set fit for 1994-2001 for Acura Integra /1992-2000 for Honda Civic /93-1997 for Honda Civic del Sol

  • APPLICABLE MODELS- The Coilover Struts Spring Shocks fit 1994-2001 Acura Integra /1992-2000 Honda Civic /93-1997 Honda Civic del Sol(Note: if you car model is 1994-2001Acura Integra, For Need spacers for rear coilover only).
  • SPECIFICATIONS- Adjustable height, Non Adjustable camber plate, Non Adjustable Damper.
  • SPRING RATE -2 piece front( 8kg/1), 2 pieces rear (6kg/1).
  • FEATURES OF COILOVER SUSPENSIONS KITS- Direct Replacement Easy Installation, Bushings included for a complete installation, saving time and labor..
  • WHAT YOU GET- Coilover Suspensions Kits, High-quality after-sales service and technical staff . We provide one year warranty and 100% quality assurance. Please check the description to confirm the compatibility car models before purchase.
Check Stock

Camber Gauge Digital Wheel Alignment Tool -90° to +90° Wide Range Wheel Alignment & Balancing Tools Accurate Caster Camber Gauge with Digital Display & Powerful Magnet & Positioning Bubble & Reset Key

  • 【Professional Digital Caster Camber Gauge】The camber gauge is used to measure the camber and caster angles of wheels or brake discs.Camber gauge allows you to restore the strut to original camber position after disassembling and reassembling the suspension,or to check the camber change before reinstalling. It can help you adjust camber and caster to maintain correct wheel alignment, reduce tire wear, and increase the speed of your car. It can also be used to adjust the levers of the rear wheels..
  • 【Easy-to-read Digital LCD Display & ±90° Wide Range Measurement】Wheel alignment & balancing tool is equipped with a clear digital display,allowing you to quickly read the caster and camber angles.You can check and adjust the castor and camber angles at a glance.This camber gauge also has a backlight for use in dark areas.The camber gauge has an ultra-wide measuring angle range from -90 to +90 degrees.It is suitable for wheel alignment of all vehicles,such as cars, motorcycles, trucks, vans, etc..
  • 【Powerful Magnet&Positioning Bubble Design for Accurate Measurement】There is a magnet with strong magnetic attraction at the bottom of the camber gauge,which can be easily attached to various magnetic surfaces.The magnet attached area of the ....
Check Stock

yjracing Rear Lower Control Arm Subframe Brace Tie Bar Kit Repalcement for 1996-2000 Honda Civic EK Silver

  • Adjustable to minimize camber, brings quicker response..
  • Made of high quality CNC machined T6061 aircraft aluminum. Reduce up to 4lb of weight comparing to stock equipments, anodized finish for durability..
  • OE-Style powder-coated bushing finish for the highest durability.
  • Provision for sway bar endlinks included.
  • Compatible with 1.6L 1996-2000 Honda Civic CX DX EX GX HX LX Si.
Check Stock

Belltech 965SP Front and Rear Street Performance Suspension Kit

  • Compatible With Honda Civic (FA/FG) 2006 2007 2008 2009 2010 2011.
  • Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 10 kg/mm (560 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | No, Reuse Factory Top Mount // Damping Levels: 32 Ways.
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock