Top Horizontal Cnc Machine Center

Genmitsu 3018-PROVer V2 Upgraded Desktop CNC Router Machine with GRBL Offline Control, Limit Switches & Emergency-Stop, XYZ Effective Working Area 284 x 180 x 40mm (11.2 x 7.1 x 1.6 inches)

  • The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business..
  • Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card..
  • The redesigned Z Axis Carriage has fixed excess movement which came from the old design anti-backlash spring. Not only did this improve the engraving accuracy, but also increased the effective range of the Z Axis from 35mm to 40mm. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material..
Check Stock

2\ Boring Head SET 12 Pcs Carbide Boring Bars MT2 -M10 F1-12 50mm Boring Head With 9pcs 12mm Boring Bars Milling Machine Accessories

  • This tool set is made of high quality material, good wear resistance, and durable in use.
  • The product is the main accessories of boring and CNC milling machine tools like coordinate boring machine, horizontal boring machine, ordinary boring..
  • It can be used for boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cut the hole and the outer ring groove and other processing..
  • This tool set contains boring head,Boring Bars, perfect for the milling machine.
Check Stock

3/8 Hose Barb to 1/2 Male NPT 90 Degree Elbow Brass Hose ID to Pipe Threaded L Right Angle Fitting Fuel/Air/Water/Gas/Oil WOG 2 Pack

  • ✅ CONTENTS: Two 3/8-inch barb to 1/2-inch NPT male 90-degree brass elbows, use it to change the flow direction from vertical pipe to horizontal hose or the opposite way.
  • ✅ APPLICATIONS: Suitable for use in home, automotive, nautical, industrial, and commercial applications. Brass elbows are perfect to made air, water, fuel, coolant, gas and oil connections. NOT RECOMMENDED FOR POTABLE WATER USE. Please Note: NPT Size DOES NOT directly correspond to actual dimensions of the thread. 1/2 NPT nominal size works with a 0.84" outside diameter pipe.
  • ✅ HIGH-QUALITY HEAVY-DUTY BRASS: Made completely of solid, durable CA377 forged, machined brass that is barbed from a solid brass stock using the CNC machine center. High quality deep threads will prevent leaks and corrosion. These pieces are ultrasonically cleaned before leaving the factory, so their surfaces do not have any metal shavings and dust, and no organic oil adheres to the surface. This pipe fitting provides full and secure flow and withstands high pressure..
  • ✅ 100% MONEYBACK GUARANTEE: We offer 100% money back guarantee with no questions asked. This great product also comes with 10-year warranty for quality related issues. Purchase with confidence and enjoy our risk-free offer.
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

CAVIX Ball Head Low Profile Camera Panoramic Tripod Head Metal 36 Ballhead w Bubble Level 1/4" Arca Swiss Type Quick Release Plate &3/8" Thread for DSLR Tripod Monopod Camcorder MLoad29lbs/13kg

  • ...nd lightweight. Max loading capacity: 29lbs/13kg, bottom diameter: 1.95in/50mm, ball head height: 3.07in/78mm, Net weight:0.57 lbs/0.26kg..
  • ➽【Precise Panoramic Ballhead with Bubble Level】: Upgraded 360-degree rotation panoramic tripod head with panning base to enable horizontal panoramic photography. Engraved scale on the top clamp and bottom panning base for precise panorama shoots. Built-in bubble level indicator on QR clamp for aiming and balance horizon leveling, which helps photographers to take wonderful panoramic photos in landscape photography..
  • ➽【Portable Design, Support Horizontal & Vertical Shooting】: The ball adopts Polymer materials design, which brings lighter weight without compromising its locking force. Hollow-out design of QR quick-release clamp plate makes the ball head lightweight and portable for travel. The U-groove of ball head allows free switch between vertical and horizontal shooting easily. 2 twist-lock knobs design can set your camera at different angles easily and quickly tighten or loosen the ball..
  • ➽【Arca Standard Quick Release Plate Wide Compatibility】: The camera tripod....
Check Stock

Woodworking Ruler, 3Pcs Precision Pocket Ruler Metal Slide Rule Inch and Metric T-Type Scribing Ruler Square Ruler T Track Ruler Marking Measuring Ruler with Slide Stops(6/8/12 Inch)

  • Includes 2 Squares: 4" / 90° and 7" / 90°.
  • Triangle Square - Joinery Layout - Machine Setup - Measure and Marking - Center Finder.
  • Triangle Square: CNC Stainless Steel Contruction - Precision Laser Engraving.
  • Base: CNC Solid Aluminum Construction - Blue Anodized Finish - Precision Laser Engraving.
Check Stock

Genmitsu CNC Machine 4040-PRO for Wood Acrylic MDF Nylon Carving Cutting, GRBL Control, 3 Axis CNC Router Machine, Working Area 400 x 400 x 78mm (15.7” x 15.7” x 3.1”)

  • New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the CNC machine..
  • Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port..
  • All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged..
  • The extra spindle mount, laser module and other upgraded accessories are available for order. You could upgrade the machine easily based on your needs. If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions ....
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock

Dolly Shot

  • Supported Mode: This electric camera slider supports tracking shooting, panoramic shooting, time lapse, video capture, free set starting point and ending point.
  • Remote Controller: Easily set the starting and ending points as needed, the sliding speed(1% -100%), Slip interval (0.1-999.9) stoptime (0.1-999.9) and the number of pictures(1- 999) etc.
  • Premium Material Support: Precision CNC machine processing and aluminum alloy structure making this camera slider durable, equipped with the updated motor, making your shooting more smooth and effective.
  • Multiple-Angles Shooting: Easily install the motorized slider on the tripod via the 1/4 "and 3/8" screw holes in the sliders, making vertical, horizontal and 45 degree shooting, with the load capacity up to 44 pounds vertically and 5.5 pounds when 30 degree shooting.
  • Support & Warranty: GVM camera slider come with 365 days free warranty and refund within 30 days and GVM support team promise 24h friendly customer service and email support. US local company.
Check Stock

Chum Power 1/64\-1/2\ Special Heavy Duty Keyless Drill Chuck, JT33 Mount, Titanium Jaws

  • All parts are ground, heat treated, surface treated and under specific QC condition..
  • Extrmely high accuracy and precision design, suitable for CNC mahines and machine center..
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock