Top Hose Barbs With Ball Valve

Oupeng sky Brass Garden Hose Shut Off Valve,Heavy Duty Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty 3/4 Inch Solid Brass Garden Hose Shut Off Valve with 4 Extra Rubber Washers.

  • Easy to use & extensive： Swivel connection, perfect for garden nozzle, sprayers, watering tools, accurate attachment to faucet or spigot.It’s perfect for garden hoses and power washer, RV, boat or anywhere there’s a standard 3/4″ garden hose connection..
  • Brass Garden Hose Shut Off Valve： 3/4 in Solid Brass Shut Off Valve Garden Hose Connector, 2 Pack Heavy Duty Water Hose Turn Off Ball Valve Adapter Fittings with 4 Extra Hose Pressure Washers.The hose washers are made of soft, resilient rubber for a water-tight seal. Made to resist hardening and cracking..
  • Heavy Duty brass one way valve,Well made, zero leaks. If you have any questions about these products, please contact us and we will help you solve them as soon as possible..
  • Garden Hose Valve：Extreme Duty Brass Shut Off valve,brass one way valve,Solid Brass Construction,no leakage.You can use these to attach to end of hose then you could swap out heads without turning water off at the hose bib.A great addition to the end of your hose. Makes it easy to change fittings without having to go all the way back to the other end..
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Hilmor 1935918 48" Hose with Ball Valve End Rated for 800 PSI, 3/8" Vacuum, Black

  • 48" HOSE WITH BALL VALVE END: Features an extra abrasion-resistant layer for superior protection in tough conditions.
  • HANDLES HIGH PRESSURE: Rated for 800 PSI working pressure to work with the newest high-pressure refrigerants.
  • EASY TURN VALVE: Retooled hose includes an easy turn valve for added control of refrigerant loss.
  • Package diaCOMPACT SIZE: Compact design allows the hose to be used even in cramped spacesmensions : 2.54 cms L x 24.13 cms W x 35.56 cms H.
  • EASY INSTALLATION: Measuring 48" long, the hose is easy to install for an efficient, convenient to use solution.
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

Lichamp R134A Self Sealing Can Tap AC Refrigerant Adapter R134a Can Adapter Valve with Ball Valve and Tank Adapter Fits 1/4 or 1/2 Fitting Hose

  • 134A CANS OPENER KIT -- Automotive air conditioner freon can tap tool for connecting 1/2-16 ACME male fitting cans bottle mounth with ac charging....
  • SELF SEALING STYLE -- Suitable for the latest 50 State compliant self-sealed valve refrigerant container. Before buying, please identify whether the....
  • WIDE APPLICATIONS -- Include extra tank adapter with 1/4 inch female to 1/2 inch male thread fitting makes a easier charging project..
  • EXTRA TENSION HOSE -- Convenient 6 inches tension hose with ball valve for connecting 1/4 inch female fitting hose with 1/4 inch male fitting gauge,....
  • DURABLE AND SAFE -- Enlarged tap handle and lengthened ball valve handle for easy operation, body made of heavy duty brass and premium anodized....
Check Stock

Lichamp 3 Pieces 5FT AC HVAC Manifold Gauge Hose Kit with Ball Valve Tension Hose and 4 Pieces Hose Adapters Fits R134A R410A R404A R12 R22 R502 R1234YF Refrigerants

  • Professional ac hose kit for workig with ac hvac air conditioner manifold gauge, fits R134A R410A R404A R12 R22 R502 R1234YF type refrigerants..
  • 5FT long hose kit with ball valve end tension hose feature a 4000 psi burst pressure and 800 psi max working pressure, Suit for most of ac hvac check and charge project..
  • Standard 1/4 inch female flare fittings with a valve core depressor and 45° bend on one end ball valve for convenient and safe access to the system, extra 4 pieces adapters ensure that most interfaces can be connected..
  • Long lasting and rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability..
  • Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening, hose ends feature a strong six-sided crimp that provides a secure, reliable connection between the hose and barb - even at maximum pressure..
Check Stock

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

  • ...♠PREMIUM QUALITY MATTERIAL: Siphon pump for gasoline with thick hose wall, it can endure long time use with no crushed. Brass nozzle, PVC tube and industrial strength glass ball make it anti-static and safe for gasoline oil fuel diesel transfer..
  • ♠NYLON TIGHTEN BAND: Gas siphon with a nylon tighten band on brass valve end, you don't worry that the copper head come off from the tube and go into your car oil tank. Before use, please pull the nylon zip tie to keep the brass valve more tightening. Don't pull it out by force..
  • ♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
  • ♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size..
Check Stock

VISLONE Air Conditioning Refrigerant R410A R134A Shut Valves for AC HVAC Refrigeration Charging Hoses 3PCS Color Coded

  • 【Angled Ball Valve】45 degree angle Manual Shut-off Valve with 1/4" SAE male and female fitting. The coupler nuts are deeply knurled for quick....
  • 【Well-Designed Valve】The compact switch ball valve can be operated with one hand - Screws onto charging hose end. Ball valve design with a quarter....
  • 【Wide Application】Universally added to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or....
  • 【Premium valve kit】Made of high quality brass alloy, durable, long service life.
  • Easy to operate and install, strong sealing for durability and....
  • 【Color coded hoses】3PCS color coded R410A R134A shut valves.Necessary tools for HVAC, car Air condition (A/C) Maintenance and coolant or freon....
Check Stock

280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check....
Check Stock

204Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling

  • Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily，just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
  • Large quantities: 204 matching kits total, Spray (14 pcs), Micro Drip (12pcs), Tees (50pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs), Straight Barbs (40pcs).
  • High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
  • Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
  • Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/....
Check Stock

JUSONEY Shut Off Valve, Water Hose Turn Off Valve Garden Hose Connector Set with Rubber Gaskets (12PCS)+Leak-Free Ball Valve (6PCS) Standard 3/4' Thread

  • Package Includes 6 hose shut-off valve with rubber gaskets and extra 12 rubber gaskets. When you installation, make sure that it be tightened, but not super tight or else you will crush the gasket..
  • Simply give a quarter turn and you have water! The water valve thread have well cut to change out any spraying device. and the lever ball easily control the flow..
  • NO RUSTING! our garden hose shut off valve is made out of a combination of strategically placed hardened PVC plastic and zinc, and will never rust..
  • With the TPR rubber coated body, the turn off valve body is anti-slip, which means you can grip it even with wet hands!.
  • Put hose connectors between two hoses conveniently shut off water at the end of the hose without having to walk back to the spigot shut the water on and off..
Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

  • Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
  • Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
  • Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
  • Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
  • Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..
Check Stock