Top Hose Bib Installation Kit
Breezliy 2pcs Garden Hose Pressure Regulator 25 PSI, 3/4" FHT × 3/4“ MHT, Pressure Reducer, Great for Drip Irrigation System Distributing Regulator drip Irrigation Parts emitters for drip line
- 25 PSI preset pressure regulators (hose thread) are used to reduce and regulate the incoming pressure of a household’s water entering a drip irrigation or micro sprinkler system to the appropriate operating pressure of 25 PSI,Pressure Compensation Range: 30-100 PSI..
- High-strength ABS construction for durability, available with 3/4” female hose thread to fit all standard hose or pipe thread connections.
- Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). It may be connected to an automated timer, backflow preventer, or filter, if desired..
- This 25 psi pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA..
- Suitable for retro-fitting sprinkler zones, faucet, hose, or gravity feed - For installation above grade, in a Bubbler Box or in a green house.
Check StockEZ-FLO 2020-HB 2 Gallon Low Pressure Hose Bib and Drip Connection Fertilizer Injector System 7.5 Liter
- EZ Flo 2020-HB Garden Hose Fertilizer Injector w/ Backflow Preventer - Hose Bib and Drip System.
- Approximate Feed Ratio Range: 1000:1 (slow setting), 100:1 (fast setting).
Check StockBad Days for Bad Men: Smoke Jensen's American Justice
- ...eavy pressures and conditions for improved longevity.
- A Complete Kit: This Milton's Bells Driveway Kit comes with the essentials for a complete alert system: the Milton 805 Driveway bell, 25' signal hose and rubber hose plug.
- Easy Installation: The driveway alarm system is simple to setup and can be easily mounted to any necessary configurations.
Check Stockgohantee Fire Ring Burner Valve Assembly Kit, 12 inch Stainless Steel Fire Pit Installation Kit for Propane Gas, Replacement Parts for Propane Gas Fire Pit, Outdoor Fireplaces 90000 BTU
- [ WIDE APPLICATION] The Installation Kit replacement for propane gas fire pit, compatible with fire pit system with low pressure less than 90000 BTU, please do not use it in high pressure fire pit system to avoid damaging your equipment..
- [UNIQUE DESIGN] The kit includes 5FT low pressure QCC inlet connection propane regulator and 5FT low pressure extension hose with key control valve, which can meet your fire pit installation needs. The control key valve can be opened and closed to control the gas entering and the fire can be adjusted by controlling the gas entering. Improving propane burn efficency, reduces sooting normally associated with propane. Worked perfectly for your outdoor propane fireplace project..
- [ PREMIUM QUALITY ] Air mixer valve kit made of 304 stainless steel and brass with connector 3/8" male fitting, making them extremely durable. 90 degree elbow air mixer valve is good for the constructions. Strict quality control standards to build and test and ensure you safe leakage free operation while providing excellent weather resistance..
- [EASY TO INSTALL] This propane fire pit installation kit including 12 inch double burner ring with includes 5FT low pressure QCC inlet connection propane regulator and 5FT low pressure extension hose. Pret....
Check StockSuperlift | 91335 | Bullet Proof Rear Hose | Single Hose | Fits 1971-1987 GM Pickup; 1971-1991 Blazer/Suburban with 4-6" Lift Kit
- 1971-1991 Blazer / Suburban with 4-6" Lift Kit.
- Bulletproof Brake Hose - Rear - 1971-1987 GM Pickup 1/2 and 3/4 Ton Solid Axle Pickups and 1971-1991 Blazer Jimmy and Suburban 1/2 and 3/4 Ton Solid Axle with 4-6 inch Lift Kit.
- Stainless braided brakes hose (1) with crush washers Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.
- Bulletproof Brake Hose - Rear - 1971-1987 GM Pickup 1/2 and 3/4 Ton Solid Axle Pickups and 1971-1991 Blazer, Jimmy and Suburban 1/2 and 3/4 Ton Solid Axle with 4-6 inch Lift Kit.
Check StockPull Down Spray Hose Kit Compatible with Moen Kitchen Faucet Replacement Parts # 150259 Hose, Nylon Finish 67 Inch Length Compatible with Moen Kitchen Faucet Replacement Part 187108 Pull Down Hose
- Compatible with Moen pulldown kitchen faucets: Please check the faucet model before placing an order, make sure this fits by entering your model number. This kitchen faucet replacement hose kit is ONLY compatible with Moen pulldown kitchen faucets No.150259, NOT the pull out faucets..
- Easy Installation: Kitchen sink hose replacement is exactly the same one that needed to be replaced and compatible with your Moen pull out faucets. The installation process of pull down faucet hose is the reverse of the disassembly process, quick and easy installation, no tools and glue needed..
- Durability and Convenience: The same brass end fitting connection of kitchen faucet hose allows for 360° rotation-free. The length of kitchen faucet replacement hose is 67 inch, perfect fit when replacing your kitchen faucet hose! kitchen faucet hose replacement ensuring quality durability and convenience..
- Not leaking: Pull down faucet hose is made of high-quality metal and nylon materials. Kitchen sink hose replacement is perfectly connected to the kitchen faucet hose and prevent your kitchen faucet sink from leakage. Built for longer-lasting use with less headaches!.
- Trustworthy after-sales: We provide 1 year warranty for every Hibbent replacement hose kit for Moen pulldown....
Check StockEvertechPRO 383860 5ft / 60 inch Long Dishwasher Hose Installation Kit Stainless Steel Connection Hose Braided Design Burst Proof Water Supply Line with 3/8" Compression X 3/8 MIP Elbow
- ...ersally Compatible: Suitable for virtually any model of dishwasher, the hose has a 3/8” MIP connector. Features a 90 degree 3/8 in. male metal elbow for security and to keep your appliance closer to the wall.
- ❖ Burst-Proof: Designed with safety in mind, this dishwasher installation kit features a premium grade 304 stainless steel, burst-proof hose and an elbow at each end, making this a high quality and safe solution.
- ❖ Long Hose Length: Provides flexibility by allowing you to place your dishwasher to be positioned further away from the water inlet. EvertechPRO Universal dishwasher connection hose installation kit replacement part numbers: 383860 8212486 4396744 W10831949 WX28X327RC.
- ❖ Quality Guaranteed: The EvertechPRO dishwasher hose kit comes with a 90 day money back guaranteed and a 1 year warranty in case of manufacturing fault. Guaranteed with a 90-day money back guarantee and a 1 year warranty.
Check StockPremium Steam Dryer Hose Kit - Burst Proof Stainless Steel & 90 Degree Elbow & Y Connector (6 Foot)
- 【ALL Installation Kit】:Includes all parts for installation :6 ft stainless steel hose(with 90 Degree 'Space Saver' Elbow ).
- 1*brass Y connector(MGH),Rubber washers are pre-installed in the connectors that need them..
- 【High-quality Materials】:Our Steam Dryer Hose Installation Kit has LEAD FREE AB 1953 and UPC CERTIFIED. Grade 304 Stainless Steel, PVC Core, BRASS nuts, ferrules and nipples for superior Corrosion Resistance..
- 【Fits All Steam Dryers】- Flexible Universal Washer Hose easily connects to normal household Water Supply Lines in the Laundry room. Perfect for Homeowner or Contractor Installation..
- 【Advantages】: It's really Made to Last. The steam dryer hoses feature superior performance for a reliable leak-free connection use after use. They can withstand full flow and high pressure, preventing kinking and crimpling. These hoses are built with top-quality braided stainless steel, guaranteed not to burst..
- 【After- Sale Service】: If, for any reason, your product proves to be unsatisfactory, before you take any other action, please contact our customer service for a replacement or refund. Superior customer service is our promise to you..
Check StockCompressed Air Piping System Pressured Leak-Proof Easy to Install 3/4" x 100 feet HDPE Aluminum Air Compressor Install kit Shop Air Hose System 200PSI ASTM F1282
- ... piping, and while reliably holding presure, operates at 200 PSI at 73F and 160 PSI AT 140F..
- Easy To Install- From the moment you start operating our industrial quality shop air hose system you will enjoy its trouble-free safe operations. But first, you will like the easy installation of our air compressor piping kit. Just have a plan as to the location of the shop air compressor and where you are going to mount the compressed air outlets, follow the step-by-step instructions we provide, and very soon you will have it seamlessly up and running..
- Complete Installation Shop Air Hose Kit- RedRock Performance 3/4 air compressor hose kit has all components necessary to complete the installation. No more pipe cutting, messy threading, or gluing! Easy to cut and terminate. We provide you with a simple tool to make it effortless..
- Flexible Bend Hose- What a relief if compared with iron, copper, or PVC piping! Rolls with fewer joints allow not only faster installation but also make it easy to bend and keep in place. The aluminum lining of our rolls can create rigid but flexible layouts.The 3/4-inch inside diameter of the pipe ....
Check StockRO System 2x 3/4" Garden / Laundry hose adapter Quick push-in connect with 1/4" RO Tube
- No tool require, just screw onto your garden hose bib to provide water source for your RO system.
- 3/4″ standard size fit for reqular Garden / Laundry hose bib.
Check StockCertified Appliance Accessories Steam Dryer Installation Kit [Steam Dryer Hose Y Connector and Inlet Adapter Hose] 6 Feet
- STAINLESS STEEL FILL HOSE – This kit includes a 6ft braided premium stainless steel fill hose with clear vinyl surrounds flexible and durable PVC....
- WATER INLET ADPATER – This kit includes a 1ft braided premium stainless steel inlet adapter hose 3/4" FGH x 3/4" MGH (Male Garden Hose) that acts as....
- HOSE Y SPLITTER – This kit includes a Y-connector FGH x MGH x MGH that allows you to split the water supply between your washing machine and steam....
- CERTIFIED FOR YOUR SAFETY - UPC (Uniform Plumbing Code), NSF 61 (National Sanitation Foundation), ASME # A112.18.6 (American Society of Mechanical....
- 5-YEAR LIMITED WARRANTY – If your steam dryer installation kit isn’t in perfect working condition for at least 5 years, we’ll send you a new one....
Check StockSuperior Pump 99621 Lay-Flat Discharge Hose Kit, 1-1/2-Inch by 25-foot
- 25-Foot discharge kit for use with most sump and utility pumps.
- 1-1/2-Inch by 25-foot reinforced PVC lay-flat hose.
- Hose kit also includes: (1) 1-1/4" FTP x 1-1/4" FTP or 1-1/2" MPT coupling, 1-1/4" MPT x 1-1/2" BARB adapter and one stainless steel hose clamp.
- Includes all components: Hose, Hose Clamp, Coupling, Barb Adapter - for quick, easy installation.
Check Stock