Top Hose Clamp Fittings

8 Size Heavy Duty Ratcheting Hose Clamp 6.1-26.1mm Adjustable Speedy Double Snap Grip Nylon Plastic Hose Clamp 68PCS Black

  • 【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings..
Check Stock

Metalwork 2\ Tri Clamp to 1\ Hose ID Barbed Adapter SUS304 Sanitary Hose Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8\ Barb x 1/4\ Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to hose on one end and has an NPT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • ...o repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Mender + 8pcs stainless tightening clamp + 4 pcs rubber gaskets. Stainless clamp width is 10mm..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

100Pcs Spring Hose Clamp Flexible Sealing Fuel Pipe Cip Clamp Carbon Steel Color Zinc Plating 6-22mm

  • Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage, hose clip clamps are great for indoor or outdoor operation.
  • These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes.
Check Stock

Garden Hose Repair Kit 5/8 Inch Fittings Mender 3/4 Male and Female Water Hose End Replacement Set Connector with Zinc Clamp

  • ⌘【Heavy Duty】: These 5/8 garden hose repair fittings can fix and secure the ends of damaged hoses for continued use in garden hose assemblies..
  • ⌘【Leak Resistant Duty】: This garden hose mender has raised ridges (or barbs) on one end of the fitting that hold it firmly in place when it is inserted into the damaged hose, creating a leak-resistant seal..
  • ⌘【Material】: Water hose repair kit connectors are made of brass, and the clamps are made of stainless steel..
  • ⌘【Easy to Use】: Easy to connect and disconnect, male hose end repair can be uses to repair and connect the garden hose ends. Fit for ⅝" or ¾" hose fittings..
  • ⌘【Package Include】: 4 sets male and female hose end repair connector with clamp, extra 8 pack garden hose washers..
Check Stock

Spring Hose Clamp, Durable Easily Adjusted Carbon Steel Hose Clamp Safety Connection Fastener for Automobiles Tractors, Forklifts, Locomotives

  • These gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
  • These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
Check Stock

DERNORD 2 Pack 1.5\ Tri Clamp to 0.5\ Hose Barbed Adapter SUS304 Sanitary Hose Barb Pipe Fitting

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1/2" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

DERNORD 1.5\ Tri Clamp to 1\ Hose Barbed Adapter SUS304 Sanitary Hose Pipe Fitting (1 Inch Barb Hose)

  • Adapter for connecting pipes or fittings of different types.
  • Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).
  • For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.
  • Fits: 1.5" Tri Clamp / Clover / Sanitary Fitting.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...TE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconn....
Check Stock

Penck 12 Pack 3/4 Inch Hose Clamps Stainless Steel Clamps Worm-Gear Hose Clamp Miniature Power-Seal Worm-Drive Kit 13-19mm Range

  • 304 Stainless steel worm gear clamp consists of a stainless steel band, housing, and screw..
  • They can adjust the miniature size for fitting small hoses. A worm gear mechanism adjusts the clamp's diameter to precisely apply sealing pressure..
  • The slotted screw allows installation using a blade screwdriver, nut driver, or socket wrench. Hose clamps attach hoses to fittings to prevent flow leakage. They come in a variety of designs and distribute uniform pressure over the circumference of hoses to bind them to fittings..
  • Worm Gear Hose Clamps are flexible and ductile with wide adjustable size about 1/2'' - 3/4'' (13-19mm). Fit for hose outside diameter 1/2'' - 3/4'' (13-19mm)..
  • You Can Adjust The Size According To Demand, Worm Friction Is Small, Lock Secure And Tight..
Check Stock